Cisco Unified SCCP and SIP SRST System Administrator Guide (All Versions)
Monitoring and Maintaining Cisco Unified SRST
Downloads: This chapterpdf (PDF - 181.0KB) The complete bookPDF (PDF - 5.71MB) | Feedback

Table of Contents

Monitoring and Maintaining Cisco Unified SRST

Monitoring and Maintaining Cisco Unified SRST

Revised: February 3, 2011

To monitor and maintain Cisco Unified Survivable Remote Site Telephony (SRST), use the following commands in privileged EXEC mode.

 

Command
Purpose

Router# show call-manager-fallback all

Displays the detailed configuration of all the Cisco Unified IP phones, voice ports, and dial peers of the
Cisco Unified SRST Router.

Router# show call-manager-fallback dial-peer

Displays the output of the dial peers of the
Cisco Unified SRST Router.

Router# show call-manager-fallback ephone-dn

Displays Cisco Unified IP Phone destination numbers when in call manager fallback mode.

Router# show call-manager-fallback voice-port

Displays output for the voice ports.

Router# show dial-peer voice summary

Displays a summary of all voice dial peers.

Router# show ephone phone

Displays Cisco Unified IP Phone status.

Router# show ephone offhook

Displays Cisco Unified IP Phone status for all phones that are off hook.

Router# show ephone registered

Displays Cisco Unified IP Phone status for all phones that are currently registered.

Router# show ephone remote

Displays Cisco Unified IP Phone status for all nonlocal phones (phones that have no Address Resolution Protocol [ARP] entry).

Router# show ephone ringing

Displays Cisco Unified IP Phone status for all phones that are ringing.

Router# show ephone summary

Displays a summary of all Cisco Unified IP Phones.

Router# show ephone telephone-number phone-number

Displays Unified IP Phone status for a specific phone number.

Router# show ephone unregistered

Displays Unified IP Phone status for all unregistered phones.

Router# show ephone-dn tag

Displays Unified IP Phone destination numbers.

Router# show ephone-dn summary

Displays a summary of all Cisco Unified IP Phone destination numbers.

Router# show ephone-dn loopback

Displays Cisco Unified IP Phone destination numbers in loopback mode.

Router# show running-config

Displays the configuration.

Router # show sip-ua status registrar

Display SIP registrar clients.

Router# show voice port summary

Displays a summary of all voice ports.

Router # show voice register all

Displays all SIP SRST configurations , SIP phone registrations and dial peer info.

Router # show voice register global

Displays voice register global config.

Router # show voice register pool all

Displays all config SIP phone voice register pool detail info.

Router # show voice register pool <tag>

Displays specific SIP phone voice register pool detail info.

Router # show voice register dial-peers

Displays SIP-SRST created dial peer.

Router # show voice register dn all

Displays all config voice register dn detail info.

Router # show voice register dn <tag>

Displays specific voice register dn detail info.