Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 7.1 (3) (SIP)
Preface
Downloads: This chapterpdf (PDF - 196.0KB) The complete bookPDF (PDF - 17.35MB) | Feedback

Preface

Table Of Contents

Preface

Overview

Audience

Organization

Related Documentation

Obtaining Documentation, Obtaining Support, and Security Guidelines

Cisco Product Security Overview

Document Conventions


Preface


Overview

Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 7.1(3) (SIP) provides the information you need to understand, install, configure, manage, and troubleshoot the phones on a Voice-over-IP (VoIP) network.

Because of the complexity of an IP telephony network, this guide does not provide complete and detailed information for procedures that you need to perform in Cisco Unified Communications Manager or other network devices. See the "Obtaining Documentation, Obtaining Support, and Security Guidelines" section.

Audience

Network engineers, system administrators, or telecom engineers should review this guide to learn the steps required to properly set up the Cisco Unified IP Phone on the network.

The tasks described are administration-level tasks and are not intended for end-users of the phones. Many of the tasks involve configuring network settings and affect the phone's ability to function in the network.

Because of the close interaction between the Cisco Unified IP Phone and Cisco Unified Communications Manager, many of the tasks in this manual require familiarity with Cisco Unified Communications Manager.

Organization

This manual is organized as follows:

Chapter
Description

Chapter 1 "An Overview of the Cisco Unified IP Phone"

Provides a conceptual overview and description of the Cisco Unified IP Phone.

Chapter 2 "Preparing to Install the Cisco Unified IP Phone on Your Network"

Describes how the Cisco Unified IP Phone interacts with other key IP telephony components, and provides an overview of the tasks required prior to installation.

Chapter 3 "Setting Up the Cisco Unified IP Phone"

Describes how to properly and safely install the Cisco Unified IP Phone on your network. Also provides procedures on how to configure and add accessories, such as Bluetooth wireless headsets, USB headsets, and analog wideband headsets, to the Cisco Unified IP Phone.

Chapter 4 "Setting Up the Cisco Unified IP Color Key Expansion Module"

Describes how to connect and configure supported Key Expansion Modules for the Cisco Unified IP Phone.

Chapter 5 "Understanding the VoIP Wireless Network"

Provides an overview and describes the setup of the wireless local area network (WLAN), which the Cisco Unified IP Phone 9971 supports.

Chapter 6 "Configuring Settings on the Cisco Unified IP Phone"

Describes how to configure network settings, verify status, and make global changes to the Cisco Unified IP Phone.

Chapter 7 "Configuring Features, Templates, Services, and Users"

Provides an overview of procedures for configuring telephony features, configuring directories, configuring phone button and softkey templates, setting up services, and adding users to Cisco Unified Communications Manager.

Chapter 8 "Customizing the Cisco Unified IP Phone"

Explains how to customize phone ring sounds and the phone idle display at your site.

Chapter 9 "Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone"

Explains how to view model information, status messages, network statistics, and firmware information from the Cisco Unified IP Phone.

Chapter 10 "Monitoring the Cisco Unified IP Phone Remotely"

Describes the information that you can obtain from the phone's web page to remotely monitor the operation of a phone and to assist with troubleshooting.

Chapter 11 "Troubleshooting and Maintenance"

Provides tips for troubleshooting the Cisco Unified IP Phone and the Cisco Unified IP Phone Expansion Modules.

"Providing Information to Users Via a Website"

Provides suggestions for setting up a website for providing users with important information about their Cisco Unified IP Phones.

"Supporting International Users"

Provides information about setting up phones in non-English environments.

"Technical Specifications"

Provides technical specifications of the Cisco Unified IP Phone.

"Basic Phone Administration Steps"

Provides procedures for basic administration tasks such as adding a user and phone to Cisco Unified Communications Manager and then associating the user to the phone.

"Installing the Wall Mount Kit for the Cisco Unified IP Phone"

Contains instructions for installing the wall mount for the Cisco Unified IP Phone.

"Cisco Unified IP Phone Non-Lockable Wall Mount"

Contains instructions for installing the Cisco Unified IP Phone Non-Lockable Wall Mount.


Related Documentation

For more information about Cisco Unified IP Phones or Cisco Unified Communications Manager, refer to the following publications:

Cisco Unified IP Phones 8961, 9951, and 9971

These publications are available at the following URL:

http://www.cisco.com/en/US/products/ps10453/tsd_products_support_series_home.html

Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager

Regulatory Compliance and Safety Information for Cisco Unified IP Phones

Cisco Unified Communications Manager Administration

Related publications are available at the following URL:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html

Cisco Unified Communications Manager Business Edition

Related publications are available at the following URL:

http://www.cisco.com/en/US/products/ps7273/tsd_products_support_series_home.html

Obtaining Documentation, Obtaining Support, and Security Guidelines

For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Cisco Product Security Overview

This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.

Further information regarding U.S. export regulations may be found at http://www.access.gpo.gov/bis/ear/ear_data.html.

Document Conventions

This document uses the following conventions:

Convention
Description

boldface font

Commands and keywords are in boldface.

italic font

Arguments for which you supply values are in italics.

[   ]

Elements in square brackets are optional.

{ x | y | z }

Alternative keywords are grouped in braces and separated by vertical bars.

[ x | y | z ]

Optional alternative keywords are grouped in brackets and separated by vertical bars.

string

A nonquoted set of characters. Do not use quotation marks around the string or the string will include the quotation marks.

screen font

Terminal sessions and information the system displays are in screen font.

boldface screen font

Information you must enter is in boldface screen font.

italic screen font

Arguments for which you supply values are in italic screen font.

^

The symbol ^ represents the key labeled Control—for example, the key combination ^D in a screen display means hold down the Control key while you press the D key.

<   >

Nonprinting characters, such as passwords are in angle brackets.



Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the publication.



Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.

Warnings use the following convention:


Warning

IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071


SAVE THESE INSTRUCTIONS