Guest

Cisco Unified IP Phone 7900 Series

Cisco Unified IP Conference Station 7936 Release Notes for Firmware Release 3.3(15) (SCCP)

  • Viewing Options

  • PDF (158.4 KB)
  • Feedback
Cisco Unified IP Conference Station 7936 Release Notes for Firmware Release 3.3(15) (SCCP)

Table Of Contents

Cisco Unified IP Conference Station 7936 Release Notes for Firmware Release 3.3(15) (SCCP)

Contents

Related Documentation

New and Changed Information

Installation Notes

Registering the Cisco Unified IP Conference Station with Cisco Unified Communications Manager

Caveats

Using Bug Toolkit

Open Caveats

Resolved Caveats

Obtaining Documentation and Submitting a Service Request


Cisco Unified IP Conference Station 7936 Release Notes for Firmware Release 3.3(15) (SCCP)


Updated January, 2008

Use these release notes with a Cisco Unified IP Station 7936 running SCCP firmware release 3.3(15).

The SCCP version of firmware release 3.3(15) is compatible with Cisco Unified Communications Manager releases 6.0, 5.1, 5.0, 4.3, 4.2, 4.1, 4.0, and 3.3.

Contents

These release notes provide the following information. You might need to notify your users about some of the information provided in this document.

Related Documentation

New and Changed Information

Installation Notes

Caveats

Obtaining Documentation and Submitting a Service Request

Related Documentation

Cisco Unified IP Phone Documentation

Refer to publications that are specific to your language, phone model and Cisco Unified Communications Manager release. Navigate from the following documentation URL:

http://www.cisco.com/en/US/products/sw/voicesw/tsd_products_support_category_home.html

Cisco Unified Communications Manager Documentation

Refer to the Cisco Unified Communications Manager Documentation Guide and other publications specific to your Cisco Unified Communications Manager release. Navigate from the following URL:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html

Cisco Unified Communications Manager Business Edition Documentation

Refer to the Cisco Unified Communications Manager Business Edition Documentation Guide and other publications that are specific to your Cisco Unified Communications Manager release. Navigate from the following URL:

http://www.cisco.com/en/US/products/ps7273/tsd_products_support_series_home.html

New and Changed Information

Cisco Unified IP Conference Station firmware release 3.3(15) provides support for the following features:

Third-party Corporate Directory

Personal Directory on Cisco Unified Communications Manager

Corporate Directory on Cisco Unified Communications Manager

Installation Notes

To load and install the required firmware image for the Cisco Unified IP Conference Station 7936 on Cisco Unified Communications Manager 6.0, 5.1, 5.0, 4.3, 4.2, 4.1, 4.0, and 3.3, follow these steps:

Procedure


Step 1 Go to the following URL:

http://tools.cisco.com/support/downloads/pub/Redirect.x?mdfid=278875240

Step 2 To download the firmware for Cisco Unified IP Conference Station 7936, click one of the following hyperlinks and follow the prompts:

For Cisco Unified Communications Manager 4.3 and earlier:

cmterm-7936-sccp.3-3-15.exe

For Cisco Unified Communications Manager 5.0(1) to 5.0(3):

cmterm-7936-3-3-15-0-sccp.cop

For Cisco Unified Communications Manager 5.0(4) and higher:

cmterm-7936-3-3-15-0-sccp.cop.sgn

Step 3 To download the Readme file, which contains installation instructions for the corresponding firmware, go back to the URL shown in Step 1 and click the appropriate hyperlink.

cmterm-7936-sccp.3-3-15-Readme.htm

Step 4 Follow the instructions in the Readme file to install the firmware.


Registering the Cisco Unified IP Conference Station with Cisco Unified Communications Manager

To register the Cisco Unified IP Conference Station with Cisco Unified Communications Manager release 6.0, 5.1, 5.0, 4.3, 4.2, 4.1, 4.0, and 3.3, follow these steps:

Procedure


Step 1 Log in to the Cisco Unified Communications Manager Administration application.

Step 2 From the menu bar, choose Device > Add a New Device.

The Add a New Device window appears.

Step 3 Select Phone from the Device Type drop-down menu and click Next.

The Add a New Phone window appears.

Step 4 Select the Cisco 7936 phone type from the drop-down menu and click Next.

The Phone Configuration window appears.

Step 5 In the Phone Configuration window, enter information in the following fields:

MAC Address

Description

Step 6 Click Insert.

The Cisco Unified Communications Manager Administration application asks if you want to assign a directory number.

Step 7 Enter the required fields.


Caveats

This section contains these topics:

Using Bug Toolkit

Open Caveats

Resolved Caveats

Using Bug Toolkit

Known problems (bugs) are graded according to severity level. These release notes contain descriptions of:

All severity level 1 or 2 bugs.

Significant severity level 3 bugs.

You can search for problems by using the Cisco Software Bug Toolkit.

To access Bug Toolkit, you need the following items:

Internet connection

Web browser

Cisco.com user ID and password

To use the Software Bug Toolkit, follow these steps:

Procedure


Step 1 To access the Bug Toolkit, go to http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs.

Step 2 Log on with your Cisco.com user ID and password.

Step 3 To look for information about a specific problem, enter the bug ID number in the "Search for bug ID" field, then click Go.


Open Caveats

Table 1 lists Severity 1, 2 and 3 defects that are open for the Cisco Unified IP Conference Station 7936 using the SCCP version of firmware release 3.3(15).

For more information about an individual defect, you can access the online record for the defect by clicking the Identifier or going to the URL shown. You must be a registered Cisco.com user to access this online information.

Because defect status continually changes, be aware that Table 1 reflects a snapshot of the defects that were open at the time this report was compiled. For an updated view of open defects, access Bug Toolkit as described in the "Using Bug Toolkit" section.

Table 1 Open Caveats for the Cisco Unified IP Conference Station 7936 

Identifier
Headline and Bug Toolkit Link

CSCsi71403

Cisco Unified IP Conference Station does not retrieve the configuration file on restart

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsi71403

CSCsk90301

Softkey template is not shown during Call Forward All

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsk90301

CSCsk90331

Cisco Unified IP Conference Station rings continuously even when set to ring once

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsk90331

CSCsk92516

Answer softkey is not displayed for second incoming call

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsk92516

CSCsk94269

Cisco Unified IP Conference Station cannot play bell ringer for an external call

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsk94269

CSCsl03913

Cisco Unified IP Conference Station does not ring with the ring tone set

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsl03913

CSCsl03926

Display goes blank in a scenario involving translation pattern

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsl03926

CSCsl07815

Cisco Unified IP Conference Station is not able to end the call in a scenario

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsl07815


Resolved Caveats

Table 2 lists Severity 1, 2 and 3 defects that are resolved for the Cisco Unified IP Conference Station 7936 using the SCCP version of firmware release 3.3(15).

For more information about an individual defect, you can access the online record for the defect by clicking the Identifier or going to the URL shown. You must be a registered Cisco.com user to access this online information.

Because defect status continually changes, be aware that Table 2 reflects a snapshot of the defects that were resolved at the time this report was compiled. For an updated view of resolved defects, access Bug Toolkit as described in the "Using Bug Toolkit" section.

Table 2 Resolved Caveats for the Cisco Unified IP Conference Station 7936 

Identifier
Headline and Bug Toolkit Link

CSCsi48295

Enabling or disabling DHCP causes validation error on a Cisco Unified IP Conference Station

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsi48295

CSCsi93560

Cisco Unified IP Conference Station does not report `Last=' reason to Cisco Unified Communications Manager while in alarm state

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsi93560

CSCsj15171

Cisco Unified IP Conference Station reboots when searching the corporate directory

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsj15171

CSCsj27152

Editdial does not work in corporate directory for Cisco Unified IP Conference Station 7936

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsj27152

CSCsj28607

Duplicate IP address hangs Cisco Unified IP Conference Station

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsj28607

CSCsj36032

Removing a 24-digit directory number from a conference makes the screen blank on a Cisco Unified Conference Station 7936

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsj36032

CSCsj36131

Cisco Unified IP Conference Station 7936 screen is garbled with a 24-digit directory number

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsj36131

CSCsj97398

Not able to resume a call after pressing transfer on a Cisco Unified IP Conference Station

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsj97398

CSCsk25515

Cisco Unified IP Conference Station does not register to Cisco Unified Communications Manager after user accesses switch maintenance

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsk25515

CSCsk30735

Cisco Unified IP Conference Station locks while dialing

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsk30735

CSCsk90726

Cisco Discovery Protocol (CDP) message sent from the Cisco Unified IP Conference Station gets corrupted

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsk90726

CSCsk99987

Cisco Unified IP Conference Station 7936 freezes when TFTP address is changed using GUI

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsk99987


Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.