Guest

Cisco Unified IP Phone 7900 Series

Cisco Unified IP Conference Station 7936 Release Notes for Firmware Release 3.3(15) SCCP

  • Viewing Options

  • PDF (106.9 KB)
  • Feedback
Cisco Unified IP Conference Station 7936 Release Notes for Firmware Release 3.3(15) (SCCP)

Table Of Contents

Cisco Unified IP Conference Station 7936 Release Notes for Firmware Release 3.3(15) (SCCP)

Contents

Related Documentation

New and Changed Information

Installation Notes

Registering the Cisco Unified IP Conference Station with Cisco Unified Communications Manager

Caveats

Using Bug Toolkit

Open Caveats

Resolved Caveats

Obtaining Documentation, Obtaining Support, and Security Guidelines

Cisco Product Security Overview


Cisco Unified IP Conference Station 7936 Release Notes for Firmware Release 3.3(15) (SCCP)


October 16, 2007

Use these release notes with a Cisco Unified IP Station 7936 running SCCP firmware release 3.3(15).

The SCCP version of firmware release 3.3(15) is compatible with Cisco Unified Communications Manager releases 6.0, 5.1, 5.0, 4.3, 4.2, 4.1, 4.0, 3.3, 3.2, and 3.1.

Contents

These release notes provide the following information. You might need to notify your users about some of the information provided in this document.

Related Documentation

New and Changed Information

Installation Notes

Caveats

Obtaining Documentation, Obtaining Support, and Security Guidelines

Related Documentation

Cisco Unified IP Phone Documentation

Refer to publications that are specific to your language, phone model and Cisco Unified Communications Manager release. Navigate from the following documentation URL:

http://www.cisco.com/en/US/products/sw/voicesw/tsd_products_support_category_home.html

Cisco Unified Communications Manager Documentation

Refer to the Cisco Unified Communications Manager Documentation Guide and other publications specific to your Cisco Unified Communications Manager release. Navigate from the following URL:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html

Cisco Unified Communications Manager Business Edition Documentation

Refer to the Cisco Unified Communications Manager Business Edition Documentation Guide and other publications that are specific to your Cisco Unified Communications Manager release. Navigate from the following URL:

http://www.cisco.com/en/US/products/ps7273/tsd_products_support_series_home.html

New and Changed Information

Cisco Unified IP Conference Station firmware release 3.3(15) provides support for the following features:

Third-party Corporate Directory

Personal Directory on Cisco Unified Communications Manager

Corporate Directory on Cisco Unified Communications Manager

Installation Notes

To load and install the required firmware image for the Cisco Unified IP Conference Station 7936 on Cisco Unified Communications Manager 6.0, 5.1, 5.0, 4.3, 4.2, 4.1, 4.0, 3.3, 3.2, and 3.1, follow these steps:

Procedure


Step 1 Go to the following URL:

http://www.cisco.com/cgi-bin/tablebuild.pl/ip-7900ser

Step 2 To download the firmware for Cisco Unified IP Conference Station 7936, click one of the following hyperlinks and follow the prompts:

For Cisco Unified Communications Manager 4.3 and earlier:

cmterm-7936-sccp.3-3-15.exe

For Cisco Unified Communications Manager 5.0(1) to 5.0(3):

cmterm-7936-3-3-15-0-sccp.cop

For Cisco Unified Communications Manager 5.0(4) and higher:

cmterm-7936-3-3-15-0-sccp.cop.sgn

Step 3 To download the Readme file, which contains installation instructions for the corresponding firmware, go back to the URL shown in Step 1 and click the appropriate hyperlink.

cmterm-7936-sccp.3-3-15-Readme.htm

Step 4 Follow the instructions in the Readme file to install the firmware.


Registering the Cisco Unified IP Conference Station with Cisco Unified Communications Manager

To register the Cisco Unified IP Conference Station with Cisco Unified Communications Manager release 6.0, 5.1, 5.0, 4.3, 4.2, 4.1, 4.0, 3.3, 3.2, and 3.1, follow these steps:

Procedure


Step 1 Log in to the Cisco Unified Communications Manager Administration application.

Step 2 From the menu bar, choose Device > Add a New Device.

The Add a New Device window appears.

Step 3 Select Phone from the Device Type drop-down menu and click Next.

The Add a New Phone window appears.

Step 4 Select the Cisco 7936 phone type from the drop-down menu and click Next.

The Phone Configuration window appears.

Step 5 In the Phone Configuration window, enter information in the following fields:

MAC Address

Description

Step 6 Click Insert.

The Cisco Unified Communications Manager Administration application asks if you want to assign a directory number.

Step 7 Enter the required fields.


Caveats

This section contains these topics:

Using Bug Toolkit

Open Caveats

Resolved Caveats

Using Bug Toolkit

Known problems (bugs) are graded according to severity level. These release notes contain descriptions of:

All severity level 1 or 2 bugs.

Significant severity level 3 bugs.

You can search for problems by using the Cisco Software Bug Toolkit.

To access Bug Toolkit, you need the following items:

Internet connection

Web browser

Cisco.com user ID and password

To use the Software Bug Toolkit, follow these steps:

Procedure


Step 1 To access the Bug Toolkit, go to http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs.

Step 2 Log on with your Cisco.com user ID and password.

Step 3 To look for information about a specific problem, enter the bug ID number in the "Search for bug ID" field, then click Go.


Open Caveats

Table 1 lists Severity 1, 2 and 3 defects that are open for the Cisco Unified IP Conference Station 7936 using the SCCP version of firmware release 3.3(15).

For more information about an individual defect, you can access the online record for the defect by clicking the Identifier or going to the URL shown. You must be a registered Cisco.com user to access this online information.

Because defect status continually changes, be aware that Table 1 reflects a snapshot of the defects that were open at the time this report was compiled. For an updated view of open defects, access Bug Toolkit as described in the "Using Bug Toolkit" section.

Table 1 Open Caveats for the Cisco Unified IP Conference Station 7936 

Identifier
Headline and Bug Toolkit Link

CSCsi25311

Meetme softkey has no response when a conference call is made

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsi25311

CSCsi71403

Cisco Unified IP Conference Station does not retrieve the configuration file on restart

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsi71403


Resolved Caveats

Table 2 lists Severity 1, 2 and 3 defects that are resolved for the Cisco Unified IP Conference Station 7936 using the SCCP version of firmware release 3.3(15).

For more information about an individual defect, you can access the online record for the defect by clicking the Identifier or going to the URL shown. You must be a registered Cisco.com user to access this online information.

Because defect status continually changes, be aware that Table 2 reflects a snapshot of the defects that were resolved at the time this report was compiled. For an updated view of resolved defects, access Bug Toolkit as described in the "Using Bug Toolkit" section.

Table 2 Resolved Caveats for the Cisco Unified IP Conference Station 7936 

Identifier
Headline and Bug Toolkit Link

CSCse93398

Number of password characters is inconsistent between GUI and Cisco Unified IP Conference Station menu

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCse93398

CSCse94575

Clicking on the `Set'softkey a couple of times fills up the screen

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCse94575

CSCsh20507

Cisco Unified IP Conference Station phone book GUI is incorrect

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsh20507

CSCsi40393

Cisco Unified IP Conference Station 7936 `End Call' softkey incorrectly appears in a scenario

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsi40393

CSCsi71403

Cisco Unified IP Conference Station does not retrieve configuration file on restart

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsi71403

CSCsi93560

Cisco Unified IP Conference Station 7936 does not report `Last=' reason to Cisco Communication Manager while in alarm mode

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsi93560

CSCsj14262

Cisco Unified IP Conference Station 7936 has old Cisco logo in IP Conference Station GUI

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsj14262

CSCsj15171

Cisco Unified IP Conference Station reboots when searching the corporate directory

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsj15171

CSCsj27152

Editdial does not work in corporate directory for the Cisco Unified IP Conference Station 7936

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsj27152

CSCsj28607

Duplicate IP address causes the Cisco Unified IP Conference Station 7936 to hang

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsj28607

CSCsj36032

Removing a 24-digit directory number causes the Cisco Unified IP Conference Station 7936 screen to blank

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsj36032

CSCsj36131

Cisco Unified IP Conference Station 7936 screen is garbled with a 24-digit directory number

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsj36131


Obtaining Documentation, Obtaining Support, and Security Guidelines

For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Cisco Product Security Overview

This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html. If you require further assistance please contact us by sending email to export@cisco.com.