Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
Voice Messages
Downloads: This chapterpdf (PDF - 1.07MB) The complete bookPDF (PDF - 4.78MB) | The complete bookePub (ePub - 1.37MB) | Feedback

Voice messages

Voice messages

You can use your Cisco Unified Wireless IP Phone to access a voicemail service.


Note


Your company determines the voicemail service that your phone system uses. For the most accurate and detailed information, refer to the documentation that came with your voicemail service.


When you have a voice message, you see the following indications:

  • Red blinking light
  • Text message You Have VoiceMail
  • Flashing message waiting icon next to your directory number in Line View.

For information about the commands that your voicemail service supports, see the voicemail service user documentation.

This chapter contains the following sections:

Set Up and Personalize Voicemail Service

Procedure
    Step 1   Press Message or press and hold .
    Step 2   Follow the voice instructions. If you changed the left softkey on the main screen to access the Phone Book (Ph Book), the Message softkey is not available.

    Related Information

    Listen to Voicemail or Access the Voicemail System Menu

    Procedure
      Step 1   Press Message or press and hold .
      Step 2   Enter your voicemail password.
      Step 3   Follow the instructions to listen to your messages. If you changed the left softkey on the main screen to access the Phone Book (Ph Book), the Message softkey is not available.

      Related Information

      Send Call to Voicemail System

      The iDivert feature automatically transfers a call (including a ringing or held call) to your voicemail system. Callers hear your voicemail greeting and can leave you a message.

      Procedure
      Press iDivert.