Table Of Contents
Cisco Unified IP Phone 7912G Release Notes for Firmware Release 8.0(4) (SCCP)
January 11, 2008
Use these release notes with the Cisco Unified IP Phone 7912G for firmware release 8.0(4) running on Cisco Unified Communication Manager versions 6.1, 6.0, 5.0, 4.1, 4.0, and 3.3 (SCCP).
These release notes provide the following information. You might need to notify your users about some of the information provided in this document.
Cisco Unified IP Phone Documentation
Refer to publications that are specific to your language, phone model and Cisco Unified Communications Manager release. Navigate from the following documentation URL:
Cisco Unified Communications Manager Documentation
Refer to the Cisco Unified Communications Manager Documentation Guide and other publications specific to your Cisco Unified Communications Manager release. Navigate from the following URL:
Cisco Unified Communications Manager Business Edition Documentation
Refer to the Cisco Unified Communications Manager Business Edition Documentation Guide and other publications that are specific to your Cisco Unified Communications Manager release. Navigate from the following URL:
Before using the Cisco Unified IP Phone 7912G with Cisco Unified Communication Manager release 3.3.2 or later, you must install the latest firmware on all Cisco Unified Communication Manager servers in the cluster. The firmware image name for the Cisco Unified IP Phone 7912G for firmware release 8.0(4) is CP7912080004SCCP080108A.sbin.
Note Release 8.0(4) supports both versions of the Cisco Unified IP Phone 7912G (CP-7912G and CP-7912G-A).
To install the firmware, follow these steps:
Step 1 Go to the following URL:
Step 2 To download the firmware for the Cisco Unified IP Phone 7912G, click one of the following hyperlinks and follow the prompts:
•Cisco Unified Communications Manager release 4.1 and earlier:
•Cisco Unified Communications Manager release 5.0 (prior to 5.0(4)):
•Cisco Unified Communications Manager release 5.0(4) and later:
Step 3 Go back to the URL shown in Step 1, double-click the following hyperlink, and follow the prompts to download the Readme file, which contains installation instructions for the corresponding firmware:
Step 4 Follow the instructions in the Readme file to install the firmware.
This section contains these topics:
Using Bug Toolkit
Known problems (bugs) are graded according to severity level. These release notes contain descriptions of:
•All severity level 1 or 2 bugs.
•Significant severity level 3 bugs.
You can search for problems by using the Cisco Software Bug Toolkit.
To access Bug Toolkit, you need the following items:
•Cisco.com user ID and password
To use the Software Bug Toolkit, follow these steps:
Step 1 To access the Bug Toolkit, go to http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs.
Step 2 Log on with your Cisco.com user ID and password.
Step 3 To look for information about a specific problem, enter the bug ID number in the "Search for bug ID" field, then click Go.
There are no open caveats for firmware release 8.0(4).
Table 1 lists Severity 1, 2 and 3 defects that are resolved for the Cisco Unified IP Phone 7921G using firmware release 8.0(4).
For more information about an individual defect, you can access the online record for the defect by clicking the Identifier or going to the URL shown. You must be a registered Cisco.com user to access this online information.
Because defect status continually changes, be aware that Table 1 reflects a snapshot of the defects that were resolved at the time this report was compiled. For an updated view of resolved defects, access Bug Toolkit as described in the "Using Bug Toolkit" section.
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2008 Cisco Systems, Inc. All rights reserved.