Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco IP Phone 7905G/7912G
Viewing Model and Status Information on the Cisco Unified IP Phone
Downloads: This chapterpdf (PDF - 161.0KB) The complete bookPDF (PDF - 2.25MB) | Feedback

Viewing Model and Status Information on the Cisco Unified IP Phone

Table Of Contents

Viewing Model and Status Information on the Cisco Unified IP Phone

Viewing Model Information

Viewing Status Messages


Viewing Model and Status Information on the Cisco Unified IP Phone


On a Cisco Unified IP Phone or from a phone's web page, you can obtain model and status information about the phone.

This chapter describes how to obtain such information from menus available on the Cisco Unified IP Phone 7905G and 7912G.

You can also obtain much of this information, and additional related information, for any Cisco Unified IP Phone from the Phone Configuration web page. For more information, see the "Device Information" section.

This chapter includes these topics:

Viewing Model Information

Viewing Status Messages

Viewing Model Information

You can verify the model and serial number of Cisco Unified IP Phones 7905G and 7912G by viewing the Model Information screen.

To view this screen, follow these steps:

Procedure


Step 1 Press the Menu button.

Step 2 Choose Settings > Model Information.

Step 3 Use the Navigation button to display the information in the Model Information screen.

Table 6-1 describes the information that appears in this screen.

To exit the Model Information screen, press the Exit softkey.


Table 6-1 Model Information Screen Items 

Item
Description

Model Number

Model number of the phone

MAC Address

MAC address of the phone

AppLoadID

Identifier of the firmware running on the phone

Boot Load ID

Identifier of the factory-installed load running on the phone

Serial Number

Serial number of the phone


Viewing Status Messages

To access the Status menu, choose Status from the Settings menu.

The Status menu contains the following options, which provide information about the phone and its operation:

Status Messages—Reserved for future use.

Network Statistics—Displays Ethernet traffic statistics.

Firmware Versions—Displays this information about the software and firmware running on the phone:

Application Load ID—Identifier of the firmware.

Boot Load ID—Identifier of the factory-installed load.

Version—Software version number.