The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
You can use Cisco Prime Collaboration Deployment to perform upgrade and migration tasks for Unified Communications applications. The following tables list the upgrade and migration tasks that Cisco Prime Collaboration Deployment supports for each application.
Note | Cisco Prime Collaboration Deployment supports the destination version 10.x and above for an upgrade or a migration. The application versions 10.x and above support virtualization. If the source version is 8.x or 9.x on virtual machine, the upgrade task can upgrade to 10.x and above. However, if the source version is 8.x or 9.x on MCS, the upgrade task is not supported. A migrate cluster task can migrate to any of releases listed in the tables, irrespective of whether on MCS 7800 or virtual machine, to 10.x or higher version on a virtual machine. |
Task |
Release |
---|---|
Cluster Discovery |
6.1(5), 7.1(3), 7.1(5), 8.0(1), 8.0(2), 8.0(3), 8.5(1), 8.6(1), 8.6(2), 9.0.(1), 9.1(1), 9.1(2), 10.0(1), 10.5(1), 10.5(2), 11.0(1), 11.5(1) |
Migrate Cluster (Install Application and Import Data from Old System) |
From 6.1(5), 7.1(3), 7.1(5), 8.0(1), 8.0(2), 8.0(3), 8.5(1), 8.6(1), 8.6(2), 9.0.(1), 9.1(1), 9.1(2), 10.0(1), 10.5(1), 10.5(2), 11.0(1), 11.5(1) To 10.x or 11.x |
Upgrade Cluster (Upgrade Application Version or Install COP Files) |
From 8.6(1), 8.6(2), 9.0.(1), 9.1(1), 9.1(2), 10.0(1), 10.5(1), 10.5(2), 11.0(1), 11.5(1) To 10.x or 11.x |
Restart |
8.6(1), 8.6(2), 9.0.(1), 9.1(1), 9.1(2), 10.0(1), 10.5(1), 10.5(2), 11.0(1), 11.5(1) |
Switch Version |
8.6(1), 8.6(2), 9.0.(1), 9.1(1), 9.1(2), 10.0(1), 10.5(1), 10.5(2), 11.0(1), 11.5(1) |
Fresh Install New Cluster or Edit or Expand an Existing Cluster |
10.x, 10.5(1), 10.5(2), 11.0(1), 11.5(1) |
Readdress (Change Hostname or IP Addresses for One or More Nodes in a Cluster) |
10.x, 11.0(1), 11.5(1) |
Task |
Release |
---|---|
Cluster Discovery |
8.5(x), 8.6(x) |
Migrate Cluster (Install Application and Import Data from Old System) |
From 8.5(4), 8.6(3), 8.6(4), 8.6(5) To 10.x or 11.x |
Upgrade Cluster (Upgrade Application Version or Install COP Files) |
From 8.6(3), 8.6(4), 8.6(5) To 10.x or 11.x |
Restart |
8.6(3), 8.6(4), 8.6(5) |
Switch Version |
8.6(3), 8.6(4), 8.6(5) |
Fresh Install New Cluster or Edit or Expand an Existing Cluster |
Not applicable |
Readdress (Change Hostname or IP Addresses for One or More Nodes in a Cluster) |
Not applicable |
Task |
Release |
---|---|
Cluster Discovery |
9.0(1), 9.1(1), 10.x, 11.0(1), 11.5(1) |
Migrate Cluster (Install Application and Import Data from Old System) |
From 9.0(1), 9.1(1), 10.x, 11.0(1), 11.5(1) To 10.x or 11.x |
Upgrade Cluster (Upgrade Application Version or Install COP Files) |
From 9.0(1), 9.1(1), 10.x, 11.0(1), 11.5(1) To 10.x or 11.x |
Restart |
9.0(1), 9.1(1), 10.x, 11.0(1), 11.5(1) |
Switch Version |
9.0(1), 9.1(1), 10.x, 11.0(1), 11.5(1) |
Fresh Install New Cluster or Edit or Expand an Existing Cluster |
10.x, 10.5(1), 10.5(2), 11.0(1), 11.5(1) |
Readdress (Change Hostname or IP Addresses for One or More Nodes in a Cluster) |
Not Supported |
Task |
Release |
---|---|
Cluster Discovery |
8.5(1), 9.0, 9.0(2), and 10.x, 11.x |
Migrate Cluster (Install Application and Import Data from Old System) |
Not Supported |
Upgrade Cluster (Upgrade Application Version or Install COP Files) |
From 9.0(2), 10.x, 11.x To 10.x or 11.x |
Restart |
9.0(2), 10.x, 11.x |
Switch Version |
9.0(2), 10.x, 11.x |
Fresh Install New Cluster or Edit or Expand an Existing Cluster |
10.5(x), 11.x |
Readdress (Change Hostname or IP Addresses for One or More Nodes in a Cluster) |
10.5(x), 11.x |
Task |
Release |
---|---|
Cluster Discovery |
8.6.1, 8.6.2, 9.x, 10.x, 11.x |
Migrate Cluster (Install Application and Import Data from Old System) |
Not Supported |
Upgrade Cluster (Upgrade Application Version or Install COP Files) |
From 8.6(x) to 8.6(x) From 8.6(x) to 9.x From 9.x to 9.x From 10.0(1) to 10.x From 10.x to 11.0 From 11.0 to 11.x |
Restart |
8.6(1), 8.6(2), 9.x, 10.x, 11.x |
Switch Version |
8.6(1), 8.6(2), 9.x, 10.x, 11.x |
Fresh Install New Cluster or Edit or Expand an Existing Cluster |
10.5(x), 11.x |
Readdress (Change Hostname or IP Addresses for One or More Nodes in a Cluster) |
10.5(x), 11.x |
From |
To |
Task Types Supported |
---|---|---|
Export Restricted (K9) |
Export Restricted (K9) |
Supported for Upgrade paths Supported for Migration paths |
Export Restricted (K9) |
Export Unrestricted (XU) |
Not supported for Upgrade paths Supported for Migration paths |
Export Unrestricted (XU) |
Export Restricted (K9) |
Not supported for Upgrade paths Not supported for Migration paths |
Export Unrestricted (XU) |
Export Unrestricted (XU) |
Supported for Upgrade paths Supported for Migration paths |
With this release, Cisco Prime Collaboration Deployment can use either root access or a sufficiently privileged nonroot user access to communicate with an ESXi host server and add it to the Cisco Prime Collaboration Deployment inventory. The nonroot user is a local user who has the host and virtual machine privileges only to perform the Cisco Prime Collaboration Deployment tasks, such as power on and off and mounting ISO or floppy, for fresh install or migration.