The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The commands in this section are specific to Cisco Prime License Manager. For platform-specific commands, see the Command Line Interface Guide for Cisco Unified Communications Solutions.
Different command privilege levels for a user are 0,1 and 4.
Privilege |
Definition |
---|---|
Privilege level 0 |
Specifies an ordinary privilege level. Users with ordinary privileges can run CLI commands with privilege level 0 only. |
Privilege level 1 |
Specifies an advanced privilege level. Users with advanced privileges can run CLI commands with privilege level 1 and below. |
Privilege level 4 |
The administrator account that the system creates when Cisco Unified Communications Manager installs has a privilege level of 4. The administrator can run all commands in the CLI. |
This command asks to select a license file from a list.
license file { diagnose | get }
Parameters | Description |
---|---|
diagnose |
Prints diagnostic information of the selected file. |
get |
Creates a TAR file of the license file(s) on the system and transfers the TAR file to a remote area. |
Administrator (admin:)
Command privilege level for diagnose : 1 and 4
Command privilege level for get : 4
Allowed during upgrade: No
Applies to: Enterprise License Manager, Cisco Prime License Manager
This command takes parameters interactively and changes the username of the administrator.
license management change user { name }
Parameters | Description |
---|---|
name |
Specifies the administrator username. |
Administrator (admin:)
Command privilege level: 4
Allowed during upgrade: No
Applies to: Enterprise License Manager, Cisco Prime License Manager
This command takes parameters interactively and changes the password of the administrator.
license management reset user { password }
Parameters | Description |
---|---|
password |
Specifies the administrator password. |
Administrator (admin:)
Command privilege level: 4
Allowed during upgrade: No
Applies to: Cisco Prime License Manager
This command lists the administrative users.
license management list users
Administrator (admin:)
Command privilege level: 0,1, and 4
Allowed during upgrade: No
Applies to: Enterprise License Manager, Cisco Prime License Manager
This command forces re-registration of all product instances associated with this Enterprise License Manager/Cisco Prime License Manager server. This command may take some time for re-registration and synchronization with all product instances to complete.
license management product re-register all
Administrator (admin:)
Command privilege level: 1 and 4
Allowed during upgrade: No
Applies to: Enterprise License Manager, Cisco Prime License Manager
This command resets the identity, store data, and essentially removes all the installed licenses. It also restarts the Cisco Prime License Manager server process to make the changes effective.
license management reset { identity | registration }
Parameters | Description |
---|---|
identity |
Resets the identity |
registration |
Resets the registration |
Administrator (admin:)
Command privilege level: 4
Allowed during upgrade: No
Applies to: Enterprise License Manager, Cisco Prime License Manager
This command downloads Cisco Prime License Manager security update from the specified remote server location and installs the contents of the specified security update file.
license management security update
Command privilege level: 4
Allowed during upgrade: No
Applies to: Enterprise License Manager, Cisco Prime License Manager
This command activates or deactivates a given service on the Cisco Prime License Manager server.
license management service { activate | deactivate }
Parameters | Description |
---|---|
activate |
Activates a given service on the Cisco Prime License Manager server. |
deactivate |
Deactivates a given service on the Cisco Prime License Manager server. |
Administrator (admin:)
Command privilege level: 1 and 4
Allowed during upgrade: No
Applies to: Enterprise License Manager, Cisco Prime License Manager
This command sets the log level for core services.
license management set log level core_services { error | warning | info | debug }
Parameters | Description |
---|---|
error |
Provides runtime errors or unexpected conditions that could be critical. |
warning |
Provides messages about potential problems. |
info |
Provides general information that may be useful. This parameter is set by default. |
debug |
Provides detailed information about the flow of the process. We recommend that you use set this parameter on an as needed basis only. |
Administrator (admin:)
Command privilege level: 0, 1, and 4
Allowed during upgrade: No
Applies to: Cisco Prime License Manager.
This command sets the log level for product instances.
license management set log level product_instances { error | warning | info | debug }
Parameters | Description |
---|---|
error |
Provides runtime errors or unexpected conditions that could be critical. |
warning |
Provides messages about potential problems. |
info |
Provides general information that may be useful. This parameter is set by default. |
debug |
Provides detailed information about the flow of the process. We recommend that you use set this parameter on an as needed basis only. |
Administrator (admin:)
Command privilege level: 0,1, and 4
Allowed during upgrade: No
Applies to: Cisco Prime License Manager.
This command displays the current log level for core services.
license management show log level core_services
Administrator (admin:)
Command privilege level: 0
Allowed during upgrade: No
Applies to: Cisco Prime License Manager.
This command displays the current log level for product instances.
license management show log level product_instances
Administrator (admin:)
Command privilege level: 0,1, and 4
Allowed during upgrade: No
Applies to: Cisco Prime License Manager.
This command lists the administrative users.
license management show system
Administrator (admin:)
Command privilege level: 1 and 4
Allowed during upgrade: No
Applies to: Enterprise License Manager, Cisco Prime License Manager
This command allows you to remove an unused Cisco Prime License Manager instance from a coresident deployment.
license management system remove
Administrator (admin:)
Command privilege level: 4
Allowed during upgrade: No
Applies to: Cisco Prime License Manager
This command resets the license client registration state to unregistered.
Administrator (admin)
Command privilege level: 1 and 4
Allowed during upgrade: No
Applies to: Cisco Prime License Manager
This command unlocks a Cisco Prime Licence Manager server defined user. The command will prompt for the name of the user to unlock.
Administrator (admin:)
Command privilege level: 1 and 4
Allowed during upgrade: No
Applies to: Cisco Prime License Manager