The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This command allows you to delete an administrator account.
delete account account-name
Parameters | Description |
---|---|
account-name |
Specifies the name of an administrator account. |
Administrator (admin:)
Command privilege level: 1
Allowed during upgrade: No
Applies to: Unified Communications Manager, IM and Presence service on Unified Communications Manager, Cisco Unity Connection
This command deletes all messages that have been marked for future delivery.
delete cuc futuredelivery
Administrator (admin:)
Command privilege level: 1
Allowed during upgrade: Yes
Applies to: Cisco Unity Connection
The following example deletes two messages that have been marked for future delivery.
admin: delete cuc futuredelivery Deleting File : UmssMtaFutureDelivery/UnityMbxDb1/5C56C086-E64B-11DC-9BAF-41FC55D89593.eml Deleting File : UmssMtaFutureDelivery/UnityMbxDb1/6D7DD796-E64B-11DC-A0E6-D1FD55D89593.eml Files : Found = 2, Deleted = 2 Note: Files that are in use cannot be deleted
This command deletes the specified locale and all of the associated files and settings from Connection.
delete cuc locale locale-id
Parameters | Description |
---|---|
locale-id |
Specifies the ID of the locale that you want to delete. |
Administrator (admin:)
Before you run this command, you must stop the Connection Conversation Manager and Connection Mixer services. After you run this command, you must restart the Connection Conversation Manager and Connection Mixer services. While running "delete cuc" locale command, you can choose to retain or not retain the locale mappings at your Unity Connection System.
If you choose to retain locale mapping, then after re-install of same locale, all objects like Subscribers and Call handlers are automatically mapped to retained locale. If you choose not to retain the locale mapping, then after uninstall all locale mappings are lost.
Command privilege level: 1
Allowed during upgrade: Yes
Applies to: Cisco Unity Connection
The following example deletes the en-GB locale and all of the associated files and settings.
admin:delete cuc locale en-GB en-GB uninstalled
This command allows you to delete the IP address for a DNS server.
delete dns addr
Parameters | Description |
---|---|
addr | Represents the IP address of the DNS server that you want to delete. |
Administrator (admin:)
After you execute this command, the system asks whether you want to continue.
Caution | If you continue, this command causes a temporary loss of network connectivity. |
Command privilege level: 1
Allowed during upgrade: No
Applies to: Unified Communications Manager, IM and Presence service on Unified Communications Manager, Cisco Unity Connection
This command deletes a DSCP port tag.
delete dscp port-tag
Parameters | Description |
---|---|
port-tag |
Represents a DSCP port tag, which is a string that is mapped to a TCP or UDP port to identify the application that uses the port. This value is for the portTag field displayed when you use the command show dscp defaults. The set of port tags is predefined. |
Administrator (admin:)
After you delete an enabled port tag, DSCP marking on that port tag stops. You can recreate a deleted port tag when you use the set dscp marking command; enter the name of the port tag that you previously deleted.
Tip | Use the command show dscp defaults to list the configured port tags. |
Command privilege level: 1
Applies to: Unified Communications Manager, Cisco Unity Connection
This command deletes all policies within the specified group or all groups.
delete ipsec policy_group { group | | all }
Parameters | Description |
---|---|
group | Represents a specific group name. |
all | Deletes all groups. |
Administrator (admin:)
Command privilege level: 1
Allowed during upgrade: No
Applies to: Unified Communications Manager, Cisco Unity Connection
This command deletes an Ipsec policy with given policy name.
delete ipsec policy_name { policy_name | all }
Parameters | Description |
---|---|
policy_name | Represents the policy name. |
all | Deletes policies within all policy names. |
Administrator (admin:)
Command privilege level: 1
Allowed during upgrade: No
Applies to: Unified Communications Manager, Cisco Unity Connection
This command allows you to delete a particular process.
delete process process-id [ force | terminate | crash ]
Parameters | Description |
---|---|
process-id | Represents the process ID number. |
force | Causes the process to stop. |
terminate | Causes the operating system to terminate the process. |
crash | Crashes the process and produces a crash dump. |
Administrator (admin:)
Use the force option only if the command alone does not delete the process; use the terminate option only if force does not delete the process.
Command privilege level: 1
Allowed during upgrade: Yes
Applies to: Unified Communications Manager, IM and Presence service on Unified Communications Manager, Cisco Unity Connection
This command allows you to delete the SMTP host.
delete smtp
Administrator (admin:)
Command privilege level: 1
Allowed during upgrade: No
Applies to: Unified Communications Manager, IM and Presence service on Unified Communications Manager, Cisco Unity Connection