Changing the Number of Voice Messaging Ports
Introduction
To change the number of voice messaging ports in Cisco Unified Communications Manager and in Cisco Unity Connection for an existing integration, use Cisco Voice Mail Port Wizard.
See the following:
-
To add voice mail ports in Cisco Unified CM Administration through the Cisco Voice Mail Port Wizard, see the Adding Voice Messaging Ports procedure in the chapter for the applicable version of Cisco Unified CM.
-
To remove voice mail ports in Cisco Unified CM Administration through the Cisco Voice Mail Port Wizard, see the Help on Cisco Unified CM Administration.
Adding Voice Messaging Ports
The following task list describes the process for Adding Voice Messaging Ports in Cisco Unity Connection Administration
Procedure
Step 1 |
In Cisco Unity Connection Administration, expand Telephony Integrations and select Port.
|
||
Step 2 |
On the Search Ports page, under Port Search Results, select Add New. |
||
Step 3 |
On the New Port page, enter the applicable settings and select Save. Make sure that there are an appropriate number of ports set to answer calls and an appropriate number of ports set to dial out. Otherwise, the integration does not function correctly. For details, see to the "Planning the Voice Messaging Ports" chapter. |
||
Step 4 |
If you are not using Cisco Unified CM authentication and encryption, skip to Step 10. If you are using Cisco Unified CM authentication and encryption, in Cisco Unity Connection Administration, expand Telephony Integrations > Security, and then select Root Certificate. Confirm that you have set up the TFTP server on the Edit Servers page for the port group to which voice messaging ports belong. Otherwise, the integration does not function correctly with Cisco Unified CM authentication and encryption. |
||
Step 5 |
On the View Root Certificate page, Right-select to Save the Certificate as a File link, and select Save Target As. |
||
Step 6 |
In the Save As dialog box, browse to the location where you want to save the Unity Connection root certificate as a file. |
||
Step 7 |
For Cisco Unified CM 5.x and later, in the File Name field, confirm that the extension is .pem (rather than .htm), and select Save. |
||
Step 8 |
In the Download Complete dialog box, select Close. |
||
Step 9 |
Upload the Unity Connection root certificate to all Cisco Unified CM servers in this Cisco Unified CM phone system integration by doing the following substeps.
|
||
Step 10 |
Sign out of Cisco Unity Connection Administration. |
Deleting Voice Messaging Ports
Procedure
Step 1 |
In Cisco Unity Connection Administration, expand . |
Step 2 |
In the Search Port page, under Port Search Results, check the check boxes next to the voice messaging ports that you want to delete. |
Step 3 |
Select Delete Selected. |
Step 4 |
For the remaining voice messaging ports in the port group, change the settings as necessary so that there are an appropriate number of voice messaging ports set to answer calls and an appropriate number of voice messaging ports set to dial out. |
Step 5 |
In Cisco Unity Connection Administration, in the Related Links drop-down list, select Check Telephony Configuration and select Go to confirm the phone system integration settings. If the test is not successful, the Task Execution Results displays one or more messages with troubleshooting steps. After correcting the problems, test the Unity Connection again. |
Step 6 |
In the Task Execution Results window, select Close and sign out of Cisco Unity Connection Administration. |