EvtBranchNotReachable
|
ERROR_ALARM
|
Branch[name=%1, address=%2] is not reachable
|
Event Log, Alert Log
|
There is an issue with the connectivity between the central
Unity Connection server and the specified branch.
|
If there is no connectivity between the central Unity Connection
server and the branch office, see the “Error Message Appears When Testing the
Connectivity of Unity Connection with Branch" section of the “Troubleshooting
Unity Connection SRSV” chapter in the Troubleshooting Guide for Cisco Unity
Connection, Release 11.x, available at
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/11x/troubleshooting/guide/b_11xcuctsg.html.
If the problem is not resolved then please contact Cisco TAC.
|
EvtBranchProvisioned
|
INFORMATIONAL_ALARM
|
The branch[name=%1, address=%2] has been successfully
provisioned
|
Event Log, Alert Log
|
The branch has been successfully associated with the central
Unity Connection server.
|
NONE
|
EvtBranchProvisioningFailed
|
WARNING_ALARM
|
Provisioning for branch[name= %1, address= %2] has failed
|
Event Log, Alert Log
|
The provisioning of branch has been failed.
|
If there is no connectivity between the central Unity Connection
server and the branch office, see the “Error Message Appears When Testing the
Connectivity of Unity Connection with Branch” section of the “Troubleshooting
Unity Connection SRSV” chapter in the Troubleshooting Guide for Cisco Unity
Connection, Release 11.x, available at
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/11x/troubleshooting/guide/b_11xcuctsg.html.
If the problem is not resolved then please contact Cisco TAC.
|
EvtBranchProvisioningFailedMaxRetries
|
ERROR_ALARM
|
Provisioning for branch[name= %1, address= %2] has failed after
maximum %3 retries
|
Event Log, Alert Log
|
Provisioning for a branch has failed in all the retries.
|
If there is no connectivity between the central Unity Connection
server and the branch office, see the “Error Message Appears When Testing the
Connectivity of Unity Connection with Branch” section of the “Troubleshooting
Unity Connection SRSV” chapter in the Troubleshooting Guide for Cisco Unity
Connection, Release 11.x, available at
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/11x/troubleshooting/guide/b_11xcuctsg.html.
If the problem is not resolved then please contact Cisco TAC.
|
EvtBranchProvisioningFailedMaxWait
|
ERROR_ALARM
|
A provisioning completion notification was not received for
branch[name= %1, address= %2] within the maximum wait time of %3 minutes
|
Event Log, Alert Log
|
Provisioning for a branch has failed because the branch did not
return the provisioning completion status within the defined timeframe.
|
If there is no connectivity between the central Unity Connection
server and the branch office, see the “Error Message Appears When Testing the
Connectivity of Unity Connection with Branch” section of the “Troubleshooting
Unity Connection SRSV” chapter in the Troubleshooting Guide for Cisco Unity
Connection, Release 11.x, available at
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/11x/troubleshooting/guide/b_11xcuctsg.html.
If the problem is not resolved then please contact Cisco TAC.
|
EvtBranchVoiceMailUpload
|
INFORMATIONAL_ALARM
|
Voice mail upload for branch[name= %1, address= %2] completed
successfully. %3 messages were uploaded
|
Event Log
|
Voicemails from branch are uploaded on the central Unity
Connection server.
|
NONE
|
EvtBranchVoiceMailUploadFailed
|
ERROR_ALARM
|
Voice mail upload for branch[name= %1, address= %2] has failed
|
Event Log
|
No voicemail could be uploaded from the branch to the central
Unity Connection server.
|
If there is no connectivity between the central Unity Connection
server and the branch office, see the “Error Message Appears When Testing the
Connectivity of Unity Connection with Branch” section of the “Troubleshooting
Unity Connection SRSV” chapter in the Troubleshooting Guide for Cisco Unity
Connection, Release 11.x, available at
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/11x/troubleshooting/guide/b_11xcuctsg.html.
If the problem is not resolved then please contact Cisco TAC.
|
EvtBranchVoiceMailUploadPartial
|
WARNING_ALARM
|
Voice mail upload for branch[name= %1, address= %2] partially
completed. %3 messages out of %4 were uploaded
|
Event Log
|
All the voicemails could not be uploaded from branch to the
central Unity Connection server.
|
If there is no connectivity between the central Unity Connection
server and the branch office, see the “Error Message Appears When Testing the
Connectivity of Unity Connection with Branch” section of the “Troubleshooting
Unity Connection SRSV” chapter in the Troubleshooting Guide for Cisco Unity
Connection, Release 11.x, available at
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/11x/troubleshooting/guide/b_11xcuctsg.html.
If the problem is not resolved then please contact Cisco TAC.
|
EvtCentralNotReachable
|
ERROR_ALARM
|
Central Unity Connection[address= %1] is not reachable
|
Event Log, Alert Log
|
There is an issue with the connectivity between the central
Unity Connection server and the specified branch.
|
If there is no connectivity between the central Unity Connection
server and the branch office, see the “Error Message Appears When Testing the
Connectivity of Unity Connection with Branch” section of the “Troubleshooting
Unity Connection SRSV” chapter in the Troubleshooting Guide for Cisco Unity
Connection, Release 11.x, available at
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/11x/troubleshooting/guide/b_11xcuctsg.html.
If the problem is not resolved then please contact Cisco TAC.
|