Cisco BTS 10200 Extensions for Pcsp Objects
Revised: August 10, 2011, OL-25013-01
This appendix provides the Cisco BTS 10200 Softswitch extensions for the Pcsp objects. Use the Cisco BTS 10200 Softswitch CLI Database to specify what each field denotes in the comment section.
PcspCms
This section provides the extentsions for the PcspCms objects.
<?xml version="1.0" encoding="UTF-8"?>
- Copyright (c) 2007 by Cisco Systems, Inc.
id - Primary key. Call Agent ID (domain name). Service provider assigns, based on
VARCHAR(8): 1.8 ASCII characters. The form of the id is CAnnn or cannn
clli - Foreign key: CLLI Code table. The Common Language Location Identifier
(CLLI) for the Call Agent.
CHAR(11): 11 ASCII characters.
mgw_monitoring_enabled - Media Gateway monitoring enabled/disabled indicator.
CHAR(1): Y/N (Default = Y).
host_ip_address - IP Address of the EMS machine servicing the response. Is only
applicable in response object.
host_id - configured EMS hostname of the EMS machine servicing the response. Is
only applicable in response object.
timestamp - Timestamp the reply from BTS EMS is done with processing the request.
Is only applicable in response object.
reply_string - Reply string as seen from BTS EMS notifying success or failure and
details of failure if available. Is only applicable in response object.
key - Security Key of the user session.
<xs:schema targetNamespace="http://www.cisco.com/CmsExtension"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.cisco.com/CmsExtension"
elementFormDefault="qualified">
<xs:element name="id" type="xs:string"/>
<xs:element name="clli" type="xs:string"/>
<xs:element name="mgw_monitoring_enabled" type="xs:boolean"/>
<xs:element name="host_ip_address" type="xs:string"/>
<xs:element name="host_id" type="xs:string"/>
<xs:element name="timestamp" type="xs:string"/>
<xs:element name="reply_string" type="xs:string"/>
<xs:element name="key" type="xs:string"/>
PcspMta
This section provides the extentsions for the PcspMta objects.
<?xml version="1.0" encoding="UTF-8"?>
- Copyright (c) 2007 by Cisco Systems, Inc.
id - Primary key. Media gateway identifier, assigned by the service provider.
VARCHAR(32): 1-32 ASCII characters.
VARCHAR(3): 1-3 ASCII characters. Permitted values are:
aggr_id - ID of the aggregation device cable modem termination system (CMTS). This
token is mandatory if supporting PacketCable DQoS; it is how the Cisco BTS10200
Softswitch call management server (CMS) determines the CMTS to which a media
terminal adapter (MTA) is attached, so it can issue gate control commands to the
VARCHAR(16): 1-16 ASCII characters.
node - Defines the hybrid fiber coax (HFC) fiber node the MTA is homed to. The HFC
fiber node sits between the CMTS and the MTA. Every MTA is assigned to a
particular node-then one or more nodes are assigned to a given CMTS.
VARCHAR(20): 1-20 ASCII characters.
host_ip_address - IP Address of the EMS machine servicing the response. Is only
applicable in response object.
host_id - configured EMS hostname of the EMS machine servicing the response. Is
only applicable in response object.
timestamp - Timestamp the reply from BTS EMS is done with processing the request.
Is only applicable in response object.
reply_string - Reply string as seen from BTS EMS notifying success or failure and
details of failure if available. Is only applicable in response object.
key - Security Key of the user session.
<xs:schema targetNamespace="http://www.cisco.com/MtaExtension"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.cisco.com/MtaExtension"
elementFormDefault="qualified">
<xs:element name="id" type="xs:string"/>
<xs:element name="aggr_id" type="xs:string"/>
<xs:element name="node" type="xs:string"/>
<xs:restriction base="xs:string">
<xs:enumeration value="RGW"/>
<xs:enumeration value="TGW"/>
<xs:element name="host_ip_address" type="xs:string"/>
<xs:element name="host_id" type="xs:string"/>
<xs:element name="timestamp" type="xs:string"/>
<xs:element name="reply_string" type="xs:string"/>
<xs:element name="key" type="xs:string"/>
PcspService
This section provides the extentsions for the PcspService objects.
<?xml version="1.0" encoding="UTF-8"?>
- Copyright (c) 2007 by Cisco Systems, Inc.
sub_profile_id - Foreign key: Subscriber Profile table. Subscriber profile ID.
VARCHAR(16): 1-16 ASCII characters.
account_id - Specifies a subscriber account ID for one or more subscribers. An
account id is only for identification purposes. The account id is not associated
with any feature grouping behavior during call processing, although it is included
VARCHAR(20): 1-20 ASCII characters.
address1 - Street name, apartment number.
VARCHAR(32): 1-32 ASCII characters.
address2 - Street name, apartment number.
VARCHAR(32): 1-32 ASCII characters.
aor_id - Mandatory and permitted term-type = SIP. Foreign key: Address of Record
table. The address of record id. Uses the domain name parser. Domain name portion
of the AOR-ID must exist in the Serving Domain Name table.AOR =USER
VARCHAR(64): 1-64 ASCII characters.
billing_type Specifies the subscriber billing type.
VARCHAR(16): 1-16 ASCII characters (Default = NONE). Permitted values are:
MR1-Measured Rate Billing 1
MR2-Measured Rate Billing 2
NONE (Default)-Billing type is not used.
category - Subscriber category.
VARCHAR(15): 1-15 ASCII characters. Permitted values are:
INDIVIDUAL (Default)-Individual subscriber.
CTXG-Assigned to the main subscriber ID of a Centrex group.
CTXG-INDIVIDUAL-Assigned to a Centrex subscriber.
CTXG-MLHG-Assigned to a Centrex MLHG (for example, attendant).
CTXG-TG-Assigned to a Centrex trunk group.
MLHG-INDIVIDUAL- Subscriber within an MLHG.
MLHG-Main subscriber ID of an MLHG.
MLHG-PREF-INDIV-Main subscriber ID of a preferential hunt list.
PBX-Assigned to the main subscriber ID of a PBX.
RACF-Access DN for remote activation of call forwarding.
city - Subscriber's city.
VARCHAR(16): 1-16 ASCII characters.
cos_restrict_id - Foreign key: COS Restrict table. COS restriction ID.
VARCHAR(16): 1-16 ASCII characters.
country - Country of subscriber.
VARCHAR(16): 1-16 ASCII characters.
ctxg_id - Foreign key: Centrex Group table. Same as ID in Centrex Group table.
VARCHAR(16): 1-16 ASCII characters.
cwt_type - Call Waiting Tone type. For Multiple DN (MDN) feature, a different Call
Waiting Tone Type can be assigned to each DN.
VARCHAR(8): WT1, WT2, WT3, WT4 (Default = WT1).
esrn - Emergency service routing number. The subscriber level ESRN is used if
available, else the ESRN assigned to the subscriber profile is used.
VARCHAR(7): 1-7 numeric digits.
forced - Use to bypass rule checking during add or change operations. When used in
a delete command, the Cisco BTS 10200 Softswitch deletes all the information
associated with the subscriber from the Subscriber table as well as all associated
tables such as the Subscriber Service Profile table, the Subscriber Feature Data
CHAR(1): Y/N (Default = N).
grp - Specifies whether a subscriber is an individual or a group. Applies to
Multiline Hunt or Centrex subscribers.
CHAR(1): Y/N (Default = N).
h323_term_id - Mandatory if term-type = H323. Foreign key: H.323 Termination
table. The termination ID for an H.323 terminal.
VARCHAR(16): 1-16 ASCII characters.
immediate_release - Specifies whether to apply the immediate release procedure
when a calling party hangs up.
VARCHAR(1): Y/N (Default = N).
mac_id - (EMS only) A MAC-ID is allowed only if term-type=sip. This token is case
sensitive-enter in uppercase. Foreign key: MAC to Subscriber table. MAC-ID of SIP
(IP) Phone. Specifies the MAC address of the subscriber's SIP phone from which
services to control features are invoked.
VARCHAR(16): 1-16 ASCII characters.
mgw_id - Mandatory and permitted if term-type = term. Foreign key: Media Gateway,
Termination tables. Media Gateway ID. The mgw-id is used as a termination ID as
well as a combined foreign key to the termination table.
VARCHAR(32): 1-32 ASCII characters.
mlgh_id - Foreign key: Multiline Hunt Group (MLHG) table. Same as ID in Multiline
VARCHAR(16): 1-16 ASCII characters.
mlhg_pref_list_id - Foreign key: MLGH Preference List table. Same as ID in MLGH
VARCHAR(16): 1-16 ASCII characters.
ohd_timer - Off-hook Delay Timer. If an off-hook trigger is set, then the Cisco
BTS 10200 Softswitch looks at the ohd-timer token and applies a dial-tone timer
equal to ohd-timer. If a user dials any digit within this timer value, the
remaining digits are collected as normal. If no digit is dialed before the
ohd-timer expires, the Cisco BTS 10200 Softswitch performs off-hook trigger
processing. Note Applies only if offhook-trigger-type=OHD.
INTEGER: 0, or 2-16 seconds (Default = 0). Note If 0 is provisioned, then
the default value in the Call Agent Configuration table is used.
offhook_trigger_type - Indicate whether an off-hook Trigger applies to this
VARCHAR(8): 1-8 ASCII characters (Default = NONE). Permitted values are:
OHD-Off-hook Delay trigger.
OHI-Off-hook Immediate trigger.
NONE (Default)-No Off-hook trigger. Note Only allowed if
policy_id - Mandatory and permitted term-type = SIP. The route policy id.
VARCHAR(16): 1-16 ASCII characters.
privacy - Specifies how calling party information (Name, DN) is displayed to the
CHAR(4). Permitted values are:
NONE (Default)-Name and number.
FULL-Do not display name or number.
NAME-Do not display name.
USER-Use user-provided privacy information. Applies only to SIP
endpoints that can include privacy information. If information is
not received for either name or number, then privacy is indicated
as "unspecified." Note PRIVACY = USER is not valid if term-type =
privacy_manager_id - Foreign key: Application Server table. The privacy manager
VARCHAR(16): 1-16 ASCII characters.
qos_id - Foreign key: QOS table. Specifies whether to use QOS index for codec
CHAR(16): 1-16 ASCII characters.
sdt_mwi - Specifies whether a stutter tone is provided as a Message Waiting
CHAR(1): Y / N (Default = Y).
Y-A stutter dial tone is provided to a user when the subscriber
goes off-hook and subscriber has Message Waiting.
N-A stutter dial tone is not provided.
secure_fqdn - (EMS Only) Permitted only if term-type=sip. Use to resolve an IP
address and compare it with the IP address received from an endpoint during
registration or during call setup (INVITE). A secure-fqdn is assigned to the AOR.
VARCHAR(64): 1-64 ASCII characters. Also provisioned in the AOR2SUB table.
Note This token is valid only if term-type=sip. If secure-fqdn is
provisioned, the AOR token is required.
send_bdn_as_cpn - Specifies whether to send the billing DN for all calls (EMG,
LOCAL, ON-NET, OFF-NET) as the CPN in the outgoing setup messages. If a billing DN
is not provisioned, the billing DN (present) or the DN1 of the main subscriber
(for PBX/MLHG subscribers) is sent as the CPN in the outgoing setup message. If
none of them are found, the DN1 is sent.
CHAR(1): Y/N (Default = N).
Y-Send the billing DN of a subscriber as a CPN in the outgoing
N-Send the DN1 of a subscriber as a CPN in the outgoing setup
send_bdn_for_emg - Specifies whether to send the billing DN value of emergency
calls for PBX over PRI, or CAS and ANALOG, subscribers as the CPN in the outgoing
Y.Send the billing DN of the subscriber as a CPN in the outgoing
N.Send the DN1 of the subscriber as a CPN in the outgoing setup
state - State designation.
VARCHAR(16): 1-16 ASCII characters.
static_contact_host - Hostname portion of the contact id as in user@hostname.
VARCHAR(32): 1.32 ASCII characters.
static_contact_port - Port number if different from default SIP port number
INTEGER: 1.4 numeric characters (Default = 5060).
static_contact_user - User portion of the contact id as in user@hostname.
VARCHAR(32): 1.32 ASCII characters.
term_id - Mandatory and permitted term-type = term. Unique key. Foreign key:
Termination table. Termination ID. Required if term-type=term. The term-id is used
as a termination ID as well as a combined foreign key to the termination table.
VARCHAR(32): 1-32 ASCII characters.
termination_immediate_rel - Specifies whether to release a call immediately when a
called party releases a call.
CHAR(1): Y/N (Default = N).
term_type - Specifies the termination type.
VARCHAR(5): 1-5 ASCII characters. Permitted values are:
TERM (Default)-MGCP termination
RG-Route guide (Not supported)
NONE-There is no termination associated with the subscriber.
H323-H.323 virtual termination
tgn_id - (or tg) Mandatory and permitted term-type=tg. Foreign key: Trunk Group
table. Trunk group ID. This field can also be provisioned using tg instead of
tgn-id. The EMS looks up the tgn-id based on the trunk group and then provisions
tg - (or tgn_id) Mandatory and permitted term-type=tg. Foreign key: Trunk Group
table. Trunk group ID. This field can also be provisioned using tg instead of
tgn-id. The EMS looks up the tgn-id based on the trunk group and then provisions
usage_sens - Specifies if usage-sensitive features are allowed. Usage-sensitive
features are not subscribed but are available for use. The subscribers are charged
per usage. The following features are available as usage-sensitive:
- AC (automatic callback)
- USTWC (three-way calling)
CHAR(1): Y/N (Default = Y).
Y-Usage-sensitive features are allowed.
N-Usage-sensitive features are not allowed.
vmwi - The Visual Message Waiting Indication. This indication is sent when a
message waiting indicator (MWI) Notify is received from the voice-mail system.
CHAR(1): Y/N (Default = Y).
voice_mail_id - Foreign key: Application Server table. Specifies the default
voice-mail id for all subscribers belonging to a subscriber profile.
VARCHAR(16): 1-16 ASCII characters.
zipcode Subscriber's zip code.
VARCHAR(10): 1-10 ASCII characters.
user_type - Defines the type of user.
VARCHAR(16): 1.16 ASCII characters. Permitted values are:
host_ip_address - IP Address of the EMS machine servicing the response. Is only
applicable in response object.
host_id - configured EMS hostname of the EMS machine servicing the response. Is
only applicable in response object.
timestamp - Timestamp the reply from BTS EMS is done with processing the request.
Is only applicable in response object.
reply_string - Reply string as seen from BTS EMS notifying success or failure and
details of failure if available. Is only applicable in response object.
key - Security Key of the user session.
<xs:schema targetNamespace="http://www.cisco.com/ServiceExtension"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.cisco.com/ServiceExtension"
elementFormDefault="qualified">
<xs:element name="account_id" type="xs:string"/>
<xs:element name="address1" type="xs:string"/>
<xs:element name="address2" type="xs:string"/>
<xs:element name="aor_id" type="xs:string"/>
<xs:element name="city" type="xs:string"/>
<xs:element name="cos_restrict_id" type="xs:string"/>
<xs:element name="country" type="xs:string"/>
<xs:element name="ctxg_id" type="xs:string"/>
<xs:element name="esrn" type="xs:int"/>
<xs:element name="forced" type="xs:boolean"/>
<xs:element name="grp" type="xs:boolean"/>
<xs:element name="h323_term_id" type="xs:string"/>
<xs:element name="immediate_release" type="xs:boolean"/>
<xs:element name="mac_id" type="xs:string"/>
<xs:element name="mgw_id" type="xs:string"/>
<xs:element name="mlhg_id" type="xs:string"/>
<xs:element name="mlhg_pref_list_id" type="xs:string"/>
<xs:element name="policy_id" type="xs:string"/>
<xs:element name="privacy_manager_id" type="xs:string"/>
<xs:element name="qos_id" type="xs:string"/>
<xs:element name="sdt_mwi" type="xs:boolean"/>
<xs:element name="secure_fqdn" type="xs:string"/>
<xs:element name="send_bdn_as_cpn" type="xs:boolean"/>
<xs:element name="send_bdn_for_emg" type="xs:boolean"/>
<xs:element name="state" type="xs:string"/>
<xs:element name="static_contact_host" type="xs:string"/>
<xs:element name="static_contact_port" type="xs:int"/>
<xs:element name="static_contact_user" type="xs:string"/>
<xs:element name="sub_profile_id" type="xs:string"/>
<xs:element name="term_id" type="xs:string"/>
<xs:element name="terminating_immediate_rel" type="xs:boolean"/>
<xs:element name="tg" type="xs:string"/>
<xs:element name="tgn_id" type="xs:int"/>
<xs:element name="usage_sens" type="xs:boolean"/>
<xs:element name="vmwi" type="xs:boolean"/>
<xs:element name="voice_mail_id" type="xs:string"/>
<xs:element name="zipcode" type="xs:string"/>
<xs:element name="billing_type">
<xs:restriction base="xs:string">
<xs:enumeration value="FR1"/>
<xs:enumeration value="FR2"/>
<xs:enumeration value="MR1"/>
<xs:enumeration value="MR2"/>
<xs:enumeration value="NONE"/>
<xs:element name="category">
<xs:restriction base="xs:string">
<xs:enumeration value="INDIVIDUAL"/>
<xs:enumeration value="MLHG"/>
<xs:enumeration value="MLHG_INDIVIDUAL"/>
<xs:enumeration value="MLHG_PREF_INDIV"/>
<xs:enumeration value="CTXG"/>
<xs:enumeration value="CTXG_INDIVIDUAL"/>
<xs:enumeration value="PBX"/>
<xs:enumeration value="CTXG_TG"/>
<xs:enumeration value="CTXG_MLHG"/>
<xs:enumeration value="RACF"/>
<xs:enumeration value="IVR"/>
<xs:element name="cwt_type">
<xs:restriction base="xs:string">
<xs:enumeration value="WT1"/>
<xs:enumeration value="WT2"/>
<xs:enumeration value="WT3"/>
<xs:enumeration value="WT4"/>
<xs:element name="offhook_trigger_type">
<xs:restriction base="xs:string">
<xs:enumeration value="NONE"/>
<xs:enumeration value="OHD"/>
<xs:enumeration value="OHI"/>
<xs:element name="ohd_timer">
<xs:restriction base="xs:int">
<xs:enumeration value="0"/>
<xs:enumeration value="2"/>
<xs:enumeration value="3"/>
<xs:enumeration value="4"/>
<xs:enumeration value="5"/>
<xs:enumeration value="6"/>
<xs:enumeration value="7"/>
<xs:enumeration value="8"/>
<xs:enumeration value="9"/>
<xs:enumeration value="10"/>
<xs:enumeration value="11"/>
<xs:enumeration value="12"/>
<xs:enumeration value="13"/>
<xs:enumeration value="14"/>
<xs:enumeration value="15"/>
<xs:enumeration value="16"/>
<xs:element name="privacy">
<xs:restriction base="xs:string">
<xs:enumeration value="FULL"/>
<xs:enumeration value="NAME"/>
<xs:enumeration value="NONE"/>
<xs:enumeration value="USER"/>
<xs:element name="term_type">
<xs:restriction base="xs:string">
<xs:enumeration value="TERM"/>
<xs:enumeration value="TG"/>
<xs:enumeration value="ROUTE"/>
<xs:enumeration value="RG"/>
<xs:enumeration value="SIP"/>
<xs:enumeration value="NONE"/>
<xs:enumeration value="H323"/>
<xs:element name="user_type">
<xs:restriction base="xs:string">
<xs:enumeration value="IP"/>
<xs:enumeration value="PHONE"/>
ListOfServicePkg - a list of BTS Service Package IDs.
<xs:element name="ListOfServicePkg">
<xs:element name="pkgid" type="xs:string"
minOccurs="0" maxOccurs="unbounded"/>
<xs:element name="host_ip_address" type="xs:string"/>
<xs:element name="host_id" type="xs:string"/>
<xs:element name="reply_string" type="xs:string"/>
<xs:element name="key" type="xs:string"/>
PcspEndpoint
This section provides the extentsions for the PcspEndpoint objects.
<?xml version="1.0" encoding="UTF-8"?>
- Copyright (c) 2007 by Cisco Systems, Inc.
sub_id - Foreign key: Subscriber table. Subscriber ID of line termination: same as
the ID in the Subscriber table.
VARCHAR(30): 1-30 ASCII characters.
<xs:schema targetNamespace="http://www.cisco.com/EndpointExtension"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.cisco.com/EndpointExtension"
elementFormDefault="qualified">
<xs:element name="sub_id" type="xs:string"/>
<xs:restriction base="xs:string">
<xs:enumeration value="LINE"/>
<xs:enumeration value="TRUNK"/>
<xs:element name="host_ip_address" type="xs:string"/>
<xs:element name="host_id" type="xs:string"/>
<xs:element name="timestamp" type="xs:string"/>
<xs:element name="reply_string" type="xs:string"/>
<xs:element name="key" type="xs:string"/>
PcspCiscoBtsCli
These are no extensions for the PcspCiscoBtsCli objects since the entire XmlEncoding string is request/response.