The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The following table provides an overview of the significant changes to this guide for the current release. The table does not provide an exhaustive list of all changes, or of all new features in this release.
Feature |
Description |
Where Documented |
---|---|---|
Reorganization and improvement of this guide. |
||
APIC authentication |
APIC accounts can point to APIC user names that are authenticated through LDAP, RADIUS, or TACACS+. |
|
APIC accounts can have in-band or out-of-band Management |
You can now add an APIC account to Cisco UCS Director with an in-band or out-of-band IP address. |
|
Unmanaged mode |
Support for configuration of network devices in unmanaged mode. |
|
ASA/ASAv Configuration through APIC Function Profiles and Service Graphs |
For systems that include network management through ACI, you can now configure NAT, static route, and IP address parameters in an APIC function profile. You can then add this function profile to an L4-L7 service graph. |