Cisco UCS Server Configuration Utility, Release 3.1(2)
Viewing Server Inventory
Downloads: This chapterpdf (PDF - 198.0KB) The complete bookPDF (PDF - 1.43MB) | The complete bookePub (ePub - 311.0KB) | Feedback

Viewing Server Inventory

Viewing Server Inventory

This chapter includes the following sections:

About Server Inventory

You can use the server inventory functionality to perform an inventory of your server. You can view details such as server summary, server properties, and an inventory of subsystems on your server such as CPU, memory, power supplies, fans, IO devices, storage, BIOS, and CIMC.

The following table explains the various subsystem details you can view in the Server Inventory.

Table 1 Server Inventory Properties
Subsystem Description

CPU

Displays the socket name, status, number of cores, number of threads, vendor, version, cores enabled, and signature of the CPUs on your server.

Memory

Displays the size, data width, locator, speed, and serial number of the DIMMs on your server.

Power Supplies

Displays the input power, output power (in watts), part number, version, serial number, and product name of the power supply units on your server.

Fans

Displays the status, power state, and speed of the fans on your server.

IO Devices

Displays the type, vendor, description, and MAC address and serial number of the I/O devices on your server.

Storage

Displays the type, description, vendor, size, bus information, and serial number of the storage devices on your server.

BIOS

Displays the vendor, version, physical ID, size, capacity, and boot order of the BIOS on your server.

CIMC

Displays the IP address, MAC address, firmware version, and IPMI version of the CIMC on your server.

Using the Server Inventory Functionality

To view the inventory of your server, follow these steps:

Procedure
    Step 1   Click the Server Inventory tab on the left navigation pane.
    Step 2   Click the Server Information tab on the left navigation pane. The server properties and server summary appear.
    Step 3   Click the Inventory tab to view an inventory of your server’s subsystems, such as CPU, memory, power supplies, fans, IO devices, storage, BIOS, and CIMC