The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Contents
This chapter contains the following sections:
Syslog messages contain the event code and fault code. To monitor syslog messages, you can define syslog message filters. The filters can parse the syslog messages based on the criteria you choose. You can use the following criteria to define a filter:
Refer to Cisco UCS Manager Message Severity Terms and Codes for more detail.
The table below lists some syslog messages that you may want to monitor in Cisco UCS Manager:
Failure |
Fault Type |
Fault Code and Description |
---|---|---|
DIMM problems |
equipment |
F0185 - DIMM [id]/[id] on server [chassisId]/[slotId] operability: [operability] |
Equipment failures |
equipment |
F0291 - Fabric Interconnect [id] operability: [operability] F0313 - Server [chassisId]/[slotId] (service profile: [assignedToDn]) BIOS failed power-on self test F0317 - Server [chassisId]/[slotId] (service profile: [assignedToDn]) health: [operability] F0373 - Fan [id] in Fan Module [id]/[tray]-[id] operability: [operability]Fan [id] in fabric interconnect [id] operability: [operability]Fan [id] in fex [id] operability: [operability]Fan [id] in server [id] operability: [operability] F0374 - Power supply [id] in chassis [id] operability: [operability]Power supply [id] in fabric interconnect [id] operability: [operability]Power supply [id] in fex [id] operability: [operability]Power supply [id] in server [id] operability: [operability] F0376 - [side] IOM [chassisId]/[id] ([switchId]) is removed F0404 - Chassis [id] has a mismatch between FRU identity reported by Fabric/IOM vs. FRU identity reported by CMC F0405 - [side] IOM [chassisId]/[id] ([switchId]) has a malformed FRU F0478 - [side] IOM [chassisId]/[id] ([switchId]) is inaccessible F0481 - [side] IOM [chassisId]/[id] ([switchId]) POST failure F0484 - Fan [id] in Fan Module [id]/[tray]-[id] speed: [perf]Fan [id] in fabric interconnect [id] speed: [perf]Fan [id] in server [id] speed: [perf] |
Thermal problems |
environment |
F0176/F0177 - Processor [id] on server [chassisId]/[slotId] temperature: [thermal] F0187/F0188 - DIMM [id]/[id] on server [chassisId]/[slotId] temperature: [thermal] F0312/F0313 - Server [chassisId]/[slotId] (service profile: [assignedToDn]) oper state: [operState] F0379 - [side] IOM [chassisId]/[id] ([switchId]) operState: [operState] F0382/F0384 - Fan module [id]/[tray]-[id] temperature: [thermal]Fan module [id]/[tray]-[id] temperature: [thermal] F0383/F0385 - Power supply [id] in chassis [id] temperature: [thermal]Power supply [id] in fabric interconnect [id] temperature:thermal]Power supply [id] in server [id] temperature: [thermal] F0409/F0411 - Temperature on chassis [id] is [thermal] F0539/F0540 - IO Hub on server [chassisId]/[slotId] temperature: [thermal] |
Voltage problems |
environment |
F0179/F0180 - Processor [id] on server [chassisId]/[slotId] voltage: [voltage] F0190/F0191 - Memory array [id] on server [chassisId]/[slotId] voltage: [voltage] F0389/F0391 - Power supply [id] in chassis [id] voltage: [voltage]Power supply [id] in fabric interconnect [id] voltage: [voltage]Power supply [id] in fex [id] voltage: [voltage]Power supply [id] in server [id] voltage: [voltage] F0425 - Possible loss of CMOS settings: CMOS battery voltage on server [chassisId]/[slotId] is [cmosVoltage] |
Power problems |
environment |
F0310 - Motherboard of server [chassisId]/[slotId] (service profile: [assignedToDn]) power: [operPower] F0311 - Server [chassisId]/[slotId] (service profile: [assignedToDn]) oper state: [operState] F0369 - Power supply [id] in chassis [id] power: [power]Power supply [id] in fabric interconnect [id] power: [power]Power supply [id] in fex [id] power: [power]Power supply [id] in server [id] power: [power] F0408 - Power state on chassis [id] is [power] |
HA Cluster failures |
management |
F0293 - Fabric Interconnect [id], HA Cluster interconnect link failure F0294 - Fabric Interconnect [id], HA Cluster interconnect total link failure F0428 - Fabric Interconnect [id], election of primary managemt instance has failed F0429 - Fabric Interconnect [id], HA functionality not ready F0430 - Fabric Interconnect [id], management services, incompatible versions F0451 - Fabric Interconnect [id], management services have failed F0452 - Fabric Interconnect [id], management services are unresponsive |
Link failures |
connectivity |
F0276 - [transport] port [portId] on chassis [id] oper state: [operState], reason: [stateQual][transport] port [portId] on fabric interconnect [id] oper state: [operState], reason: [stateQual] F0277 - [transport] port [portId] on chassis [id] oper state: [operState], reason: [stateQual][transport] port [portId] on fabric interconnect [id] oper state: [operState], reason: [stateQual] F0367 - No link between IOM port [chassisId]/[slotId]/[portId] and fabric interconnect [switchId]:[peerSlotId]/[peerPortId] |