Cisco UCS Manager GUI Configuration Guide, Release 2.1
Managing Time Zones
Downloads: This chapterpdf (PDF - 1.11MB) The complete bookPDF (PDF - 10.62MB) | The complete bookePub (ePub - 1.59MB) | Feedback

Managing Time Zones

Managing Time Zones

This chapter includes the following sections:

Time Zones

Cisco UCS requires a domain-specific time zone setting and an NTP server to ensure the correct time display in Cisco UCS Manager. If you do not configure both of these settings in a Cisco UCS domain, the time does not display correctly.

Setting the Time Zone

Procedure
    Step 1   In the Navigation pane, click the Admin tab.
    Step 2   In the Admin tab, expand All.
    Step 3   Click Time Zone Management.
    Step 4   In the Work pane, click the General tab.
    Step 5   From the Time Zone drop-down list, select the time zone you want to use for the Cisco UCS domain.
    Step 6   Click Save Changes.

    Adding an NTP Server

    Procedure
      Step 1   In the Navigation pane, click the Admin tab.
      Step 2   In the Admin tab, expand All.
      Step 3   Click Time Zone Management.
      Step 4   In the Work pane, click the General tab.
      Step 5   In the NTP Servers area, click the + button on the table icon bar.
      Step 6   In the Add NTP Server dialog box, do the following:
      1. In the NTP Server field, enter the IP address or hostname of the NTP server you want to use for this Cisco UCS domain.
      2. Click OK.

      Deleting an NTP Server

      Procedure
        Step 1   In the Navigation pane, click the Admin tab.
        Step 2   In the Admin tab, expand All.
        Step 3   Click Time Zone Management.
        Step 4   In the Work pane, click the General tab.
        Step 5   In the NTP Servers area, right-click the server you want to delete and select Delete.
        Step 6   If the Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.
        Step 7   Click Save Changes.