Cisco UCS Manager CLI Configuration Guide, Release 2.0
Configuring WWN Pools
Downloads: This chapterpdf (PDF - 442.0KB) The complete bookPDF (PDF - 7.82MB) | The complete bookePub (ePub - 1.25MB) | Feedback

Configuring WWN Pools

Configuring WWN Pools

This chapter includes the following sections:

WWN Pools

A WWN pool is a collection of WWNs for use by the Fibre Channel vHBAs in a Cisco UCS domain. You create separate pools for the following:

  • WW node names assigned to the server
  • WW port names assigned to the vHBA
Important:

A WWN pool can include only WWNNs or WWPNs in the ranges from 20:00:00:00:00:00:00:00 to 20:FF:FF:FF:FF:FF:FF:FF or from 50:00:00:00:00:00:00:00 to 5F:FF:FF:FF:FF:FF:FF:FF. All other WWN ranges are reserved. To ensure the uniqueness of the Cisco UCS WWNNs and WWPNs in the SAN fabric, we recommend that you use the following WWN prefix for all blocks in a pool: 20:00:00:25:B5:XX:XX:XX

If you use WWN pools in service profiles, you do not have to manually configure the WWNs that will be used by the server associated with the service profile. In a system that implements multi-tenancy, you can use a WWN pool to control the WWNs used by each organization.

You assign WWNs to pools in blocks. For each block or individual WWN, you can assign a boot target.

WWNN Pools

A WWNN pool is a WWN pool that contains only WW node names. If you include a pool of WWNNs in a service profile, the associated server is assigned a WWNN from that pool.

WWPN Pools

A WWPN pool is a WWN pool that contains only WW port names. If you include a pool of WWPNs in a service profile, the port on each vHBA of the associated server is assigned a WWPN from that pool.

Creating a WWN Pool

Important:

A WWN pool can include only WWNNs or WWPNs in the ranges from 20:00:00:00:00:00:00:00 to 20:FF:FF:FF:FF:FF:FF:FF or from 50:00:00:00:00:00:00:00 to 5F:FF:FF:FF:FF:FF:FF:FF. All other WWN ranges are reserved. To ensure the uniqueness of the Cisco UCS WWNNs and WWPNs in the SAN fabric, we recommend that you use the following WWN prefix for all blocks in a pool: 20:00:00:25:B5:XX:XX:XX

Procedure
      Command or Action Purpose
    Step 1 UCS-A# scope org org-name  

    Enters organization mode for the specified organization. To enter the root organization mode, type / as the org-name

     
    Step 2 UCS-A /org # create wwn-pool wwn-pool-name {node-wwn-assignment | port-wwn-assignment}  

    Creates a WWN pool with the specified name and purpose, and enters organization WWN pool mode. The purpose of the WWN pool can be one of the following:

    • To assign world wide node names (WWNNs) and world wide port names (WWPNs)
    • To assign only WWNNs
    • To assign only WWPNs
     
    Step 3 UCS-A /org/wwn-pool # set descr description   (Optional)

    Provides a description for the WWN pool.

    Note   

    If your description includes spaces, special characters, or punctuation, you must begin and end your description with quotation marks. The quotation marks will not appear in the description field of any show command output.

     
    Step 4 UCS-A /org/wwn-pool # create block first-wwn last-wwn   (Optional)

    Creates a block (range) of WWNs, and enters organization WWN pool block mode. You must specify the first and last WWN in the block using the form nn:nn:nn:nn:nn:nn:nn:nn, with the WWNs separated by a space.

    Note   

    A WWN pool can contain more than one WWN block. To create multiple WWN blocks, you must enter multiple create block commands from organization WWN pool mode.

     
    Step 5 UCS-A /org/wwn-pool # create initiator wwn wwn   (Optional)

    Creates a single initiator, and enters organization WWN pool initiator mode. You must specify the initiator using the form nn:nn:nn:nn:nn:nn:nn:nn.

    Note   

    A WWN pool can contain more than one initiator. To create multiple initiators, you must enter multiple create initiator commands from organization WWN pool mode.

     
    Step 6 UCS-A /org/wwn-pool/block# commit-buffer  

    Commits the transaction to the system configuration.

     

    The following example creates a WWN pool named sanpool, provides a description for the pool, specifies a block of WWNs and an initiator to be used for the pool, and commits the transaction:

    UCS-A# scope org /
    UCS-A /org # create wwn-pool sanpool node-wwn-assignment
    UCS-A /org/wwn-pool* # set descr "This is my WWNN pool"
    UCS-A /org/wwn-pool* # create block 23:00:00:05:AD:1E:00:01 23:00:00:05:AD:1E:01:00
    UCS-A /org/wwn-pool/block* # exit
    UCS-A /org/wwn-pool* # create initiator 23:00:00:05:AD:1E:02:00
    UCS-A /org/wwn-pool/initiator* # commit-buffer
    UCS-A /org/wwn-pool/initiator # 
    
    What to Do Next

    Include the WWPN pool in a vHBA template.

    Deleting a WWN Pool

    If you delete a pool, Cisco UCS Manager does not reallocate any addresses from that pool that have been assigned to vNICs or vHBAs. All assigned addresses from a deleted pool remain with the vNIC or vHBA to which they are assigned until one of the following occurs:

    • The associated service profiles are deleted.
    • The vNIC or vHBA to which the address is assigned is deleted.
    • The vNIC or vHBA is assigned to a different pool.
    Procedure
        Command or Action Purpose
      Step 1 UCS-A# scope org org-name  

      Enters organization mode for the specified organization. To enter the root organization mode, type / as the org-name.

       
      Step 2 UCS-A /org # delete wwn-pool pool-name  

      Deletes the specified WWN pool.

       
      Step 3 UCS-A /org # commit-buffer  

      Commits the transaction to the system configuration.

       

      The following example deletes the WWN pool named pool4 and commits the transaction:

      UCS-A# scope org /
      UCS-A /org # delete wwn-pool pool4
      UCS-A /org* # commit-buffer
      UCS-A /org #