Cisco UCS C-Series Servers Integrated Management Controller Configuration Guide, Release 1.1(1)
Viewing Server Properties
Downloads: This chapterpdf (PDF - 339.0KB) The complete bookPDF (PDF - 1.37MB) | Feedback

Viewing Server Properties

Viewing Server Properties

This chapter includes the following sections:

Viewing CPU Properties

Procedure
Step 1   In the Navigation pane, click the Server tab.
Step 2   On the Server tab, click Inventory.
Step 3   In the Inventory pane, click the CPUs tab.
Step 4   Review the following information for each CPU:
Name Description

Socket Name field

The socket in which the CPU is installed.

Serial Number field

The serial number for the CPU.

Vendor field

The vendor for the CPU.

Version field

The CPU version.

Number of Cores field

The number of cores in the CPU.

Signature field

The CPU signature.

Max Speed field

The maximum CPU speed supported by the socket.

Number of Threads field

The maximum number of threads that the CPU can process concurrently.


Viewing Memory Properties

Procedure
Step 1   In the Navigation pane, click the Server tab.
Step 2   On the Server tab, click Inventory.
Step 3   In the Inventory pane, click the Memory tab.
Step 4   Review the following information about memory:
Tip   

Click a column header to sort the table rows, according to the entries in that column.

Name Description

Name column

The name of the DIMM slot in which the memory module is installed.

Capacity column

The size of the DIMM, in megabytes.

Speed column

The clock speed of the memory module, in megahertz.

Type column

The memory type.


Viewing Power Supply Properties

Procedure
Step 1   In the Navigation pane, click the Server tab.
Step 2   On the Server tab, click Inventory.
Step 3   In the Inventory pane, click the Power Supplies tab.
Step 4   Review the following information for each power supply:
Tip   

Click a column header to sort the table rows, according to the entries in that column.

Name Description

Device ID column

The identifier for the power supply unit.

Input column

The input into the power supply, in watts.

Max Output column

The maximum output from the power supply, in watts.

FW Version column

The firmware version for the power supply.


Viewing Storage Properties

Procedure
Step 1   In the Navigation pane, click the Server tab.
Step 2   On the Server tab, click Inventory.
Step 3   In the Inventory pane, click the Storage tab.
Step 4   Review the following information about storage:
Tip   

Click a column header to sort the table rows, according to the entries in that column.

Name Description

Name column

The name of the storage device.

Status column

The status of the storage device. This can be:


  • absent

  • present