Enabling TLS Static Key Cipher
Perform this procedure to enable TLS static key cipher for Cisco UCS servers. TLS static key cipher is disabled by default.
Note |
You can enable this feature only through Cisco IMC CLI interface. |
Procedure
Command or Action | Purpose | |
---|---|---|
Step 1 |
Server# scope cimc |
Enters the Cisco IMC command mode. |
Step 2 |
Server /chassis # scope tls-config |
Enters the TLS configuration mode. |
Step 3 |
Server /chassis/tls-config # show detail |
Displays the TLS Static Cipher Enabled status: TLS Configuration : TLS Static Cipher Enabled: no |
Step 4 |
Server /chassis/tls-config # set static-cipher-enabled yes |
Enables TLS cipher. |
Step 5 |
Server /chassis/tls-config # commit |
|
Step 6 |
Type y and press Enter. |
Commits the transaction to the system configuration. |
Example
This example shows how to enable TLS static key cipher:
Server# scope cimc
Server /cimc # scope tls-config
Server /cimc/tls-config # show detail
TLS Configuration :
TLS Static Cipher Enabled: no
Server /cimc/tls-config #
Server /cimc/tls-config # set static-cipher-enabled yes
Server /cimc/tls-config *# commit
Warning: This will enable static ciphers in TLS.
KVM, Webserver, XMLAPI and Redfish sessions will be disconnected.
Do you wish to continue? [[Y]es/[N]o] y
Server /cimc/tls-config # show detail
TLS Configuration :
TLS Static Cipher Enabled: yes