The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter provides an overview of the Cisco UCS C460 M4 server.
Figure 1-1 shows the front panel features of the server.
Figure 1-1 Front Panel Features
Figure 1-2 shows the rear panel features of the server.
Figure 1-2 Rear Panel Features
|
See PCIe Slots for slot specifications. |
|
|
|
|
||
|
|
||
|
|
||
|
|
This section shows the locations of the components that are discussed in this chapter. The view in Figure 1-3 is from the top down with the top cover removed.
Figure 1-3 Replaceable Component Locations
Table 1-1 lists the features of the server.
|
|
---|---|
The server has up to 8 hot-pluggable memory risers that each have 12 DIMM slots, for a total of 96 DIMM slots. Each CPU can control 2 memory risers (up to 24 DIMMs). Memory risers are hot-pluggable.1 2 Note See the release notes for your operating system and your Cisco IMC/BIOS release for details and restrictions on hot-plugging: Cisco IMC Release Notes. |
|
The server can hold up to 12 drives:
SAS and SATA drives are hot-swappable3; PCIe drives are hot-pluggable.4 |
|
For a list of supported RAID controller options, see RAID Controller Considerations. There is one dedicated motherboard slot for a RAID controller card. Note: At this time, the RAID controller can control only 8 of the 12 drive bays. See Replacing SAS/SATA Hard Drives or Solid State Drives. |
|
The optional supercap power module (SCPM) mounts to a bracket on the chassis wall. |
|
One or two PCIe risers with five horizontal PCIe slots each. See PCIe Slots for slot specifications. |
|
The bus slots in this server support the InfiniBand architecture. |
|
The server provides these rear panel connectors:
The server also has one front-panel KVM connector that is used with the included KVM cable, which provides two USB, one VGA, and one serial connector. |
|
The 1-Gb BASE-T Ethernet LAN ports support the wake-on-LAN (WoL) standard. |
|
Up to two Cisco Flexible Flash drives in the SD card slots that are on the media riser. |
|
The server includes one internal USB 2.0 slot on the internal media riser. |
|
Four power supplies, 1400 W each. |
|
This server supports the advanced configuration and power interface (ACPI) 4.0 standard. |
|
Cisco Integrated Management Controller (Cisco IMC) firmware. Depending on your settings, the Cisco IMC can be accessed through the |
|
Resolution up to 1600 x1200, 16 bpp at 60 Hz. Up to 256 MB of video memory. |