Cisco UCS C260 Server Installation and Service Guide
Technical Specifications
Downloads: This chapterpdf (PDF - 63.0 KB) The complete bookPDF (PDF - 11.5 MB) | Feedback

Table of Contents

Server Specifications

Physical Specifications

Environmental Specifications

Power Specifications

Server Specifications

This appendix lists the technical specifications for the Cisco UCS C260 server and includes the following sections:

Physical Specifications

Table A-1 lists the physical specifications for the server.

Table A-1 Physical Specifications



3.5 in (89 mm)


17.6 in (447 mm)

Length (including slide-rail brackets)

31.5 in (800 mm)

Weight (maximum configuration)

83 lbs (37.65 kg)

Weight (maximum configuration, including slide rail brackets and cable management arm)

92 lbs (41.70 kg)

Environmental Specifications

Table A-2 lists the environmental specifications for the server.


Table A-2 Environmental Specifications


Temperature, operating

10ºC to 35ºC (50ºF to 95ºF)

Temperature, non-operating

-40ºC to 70ºC (-40ºF to 158ºF)

Humidity, non-operating

95%, non-condensing at temperatures of
25ºC (77ºF) to 30ºC (86ºF)


-30m to 1500m (-100ft to 5000ft)

Power Specifications

Table A-3 lists the specifications for each power supply.


Table A-3 Power Supply Specifications


AC input voltage

200 to 240 VAC nominal (Range: 180 to 264 VAC)

Low AC input voltage
(limited to 800W system configurations)

100 to 120 VAC nominal (Range: 90 to 132 VAC)

AC input frequency

50 to 60 Hz nominal (Range: 47 to 63 Hz)

Maximum AC-input current


Maximum output power for each power supply

1200 W (up to two power supplies can be installed)

Power supply output voltage

Main power: 12 VDC

Standby power: 12 VDC

You can get more specific power information for your exact server configuration by using the Cisco UCS Power Calculator: