Cisco UCS C210 Installation and Service Guide
Technical Specifications
Downloads: This chapterpdf (PDF - 76.0KB) The complete bookPDF (PDF - 8.93MB) | Feedback

Technical Specifications

Table Of Contents

Technical Specifications

Physical Specifications

Environmental Specifications

Power Specifications


Technical Specifications


This appendix lists the technical specifications for the Cisco UCS C210 M1 server and includes the following sections:

Physical Specifications

Environmental Specifications

Power Specifications

Physical Specifications

Table A-1 lists the physical specifications for the server.

Table A-1 Physical Specifications

Description
Specification

Height

3.45 in. (8.75 cm)

Width

17.39 in. (44.16 cm)

Depth

28.35 in. (72.00 cm)

Weight (loaded chassis)

50.70 lbs (23.00 kg)


Environmental Specifications

Table A-2 lists the environmental specifications for the server.

Table A-2 Environmental Specifications

Description
Specification

Temperature, operating:
Derate 1°C for every 1000 ft (304 m) up to a maximum altitude of 10,000 ft (3048 m).

50 to 95°F (10 to 35°C)

Temperature, nonoperating
within altitude: 0 to 40,000 feet (0 to 12,000 meters)

-40 to 149°F (-40 to 65°C)

Humidity (RH), noncondensing

5 to 93%

Altitude

0 to 10000 feet

Sound power level
Measure A-weighted per ISO7779 LwAd (dBA)
Operation at 73°F (23°C)

65.5 dBA

Sound power level
Measure A-weighted per ISO7779 LwAd (Bels)
Operation at 73°F (23°C)

6.8 Bels


Power Specifications

Table A-3 lists the specifications for each power supply (Cisco part number R2X0-PSU2-650W).

Table A-3 Power Supply Specifications

Description
Specification

AC-input voltage

115 to 230 VAC nominal
(Range: 90 to 264 VAC)

AC-input frequency

50 to 60 Hz nominal
(Range: 47 to 63 Hz)

Maximum AC-input current

10 Amps

Maximum output power for each power supply

650 W (up to two power supplies can be installed)

Power supply output voltage

Main power: 12 VDC

Standby power: 5 VDC


You can get more specific power information for your exact server configuration by using the Cisco UCS Power Calculator:

http://www.cisco.com/assets/cdc_content_elements/flash/dataCenter/cisco_ucs_power_calculator/