New and Changed Information for this Release
The following table provides an overview of the significant changes to this guide for this current release. The table does not provide an exhaustive list of all changes made to this guide or of all new features in this release.
Feature |
Description |
Where Documented |
---|---|---|
Changed to the Zoning Policy |
With this release of Cisco IMC Supervisor, you can use the zoning policy to assign physical drives to a specific controller slot on servers that support dual controllers such as Cisco UCS S3260 Dual Raid Controller (UCS-S3260-DRAID). However, choosing a specific controller slot is not mandatory. If you do not choose a specific controller slot, then the ownership of the physical drives is assigned to the first controller slot that is available on the server that you selected. |
|
Changes to the RAID Policy |
This release of Cisco IMC Supervisor introduces changes to drive security configuration and virtual drive configuration while deriving a policy from an existing server configuration. In addition, while applying the policy, the Drive Security configuration is applied to all controllers that are associated with the server. Applying the policy to virtual drives is determined by the disk group policy associated with the virtual drives. |
|
Host Image Mapping |
With this release, you cannot create a Cisco.com profile for E-series servers to download and upgrade firmware images. |
This procedure on creating a Cisco.com profile has been removed from the guide. |
Firmware Management |
With this release, you cannot download local firmware images for E-series servers. |