Use and Care Guide
Revised: October 8, 2008, OL-14522-01
Cleaning the CTS-500-37 Display
The display requires special consideration when cleaning. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth.
Tip The CTS-500-37 includes a polishing cloth in that is contained in the display; use this cloth to clean the display. Figure 6-1 shows the polishing cloth compartment.
If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water to which a small amount of neutral detergent has been added, and then wipe it evenly with a dry cloth of the same type until the surface is dry.
Figure 6-1 Polishing Cloth Compartment