MGX and SES Error Messages, Release 4
MGX and SES Error Messages, Release 4 (part A2)
Downloads: This chapterpdf (PDF - 804.0KB) The complete bookPDF (PDF - 18.8MB) | Feedback

CBC-4-CBC_UTIL_ERR

Table Of Contents

CBC-4-CBC_UTIL_ERR

CBC-4-CBC_HMM_ERR

CBC-5-INVALID_ARG

DDTS "signaling"

CC-4-CC_ACT_LEAF_QUE

CC-4-CC_SVC_QUEUING_

SIGA-4-SIGAPI_ERROR

SIGA-5-SIGAPI_WARNING

SIGA-5-SIGAPI_CRITICAL

SIGA-7-SIGAPI_INFO

SIGA-6-SIGAPI_NOTICE

SIGA-4-SIGAPI_NULL_PTR

PT-7-PT_INFORMATIVE

CC-4-CC_MALLOC_ERROR

CC-4-CC_IPC_ERROR

CC-4-CC_TIMER_START_

CC-4-CC_TIMER_STOP_E

CC-4-CC_MEMINIT_ERRO

CC-4-CC_MEMALLOC_ERR

CC-4-CC_MEMASSIGN_ER

CC-4-CC_ALLREL_ERROR

CC-7-ATMSIG_BSE_LOG

CC-4-CC_SCALING_ERRO

CC-4-CC_SCALING_ERRL

CC-7-CC_SCALING_INFO

CC-4-CC_NULL_PTR

CC-7-CC_DEL_TH_LOG

CC-4-CC_TRF_REF_COUN

CC-7-CRANKBACK_LOG

CC-7-STATIC_LOOP_LOG

CC-4-CC_SVC_AUDIT

CC-4-CC_INV_RET_TYPE

CC-4-CC_NULL_PTR_ERR

CC-4-CC_EXCEEDS_MAX_

CC-4-CC_AUDIT_TRIGGE

CC-4-CC_COUNTER_ALRE

CC-4-CC_INVALID_VALU

CC-4-CC_AUD_REL

CC-7-CC_AUD_IN_PROG

CC-7-CC_SWO_CONGESTI

CC-4-CC_AUD_SPVC_MAS

CC-4-CC_AUD_SPVC_SLA

CC-4-CC_STBL_BLKD_IN

CC-4-CC_STBL_BLKD_PA

CC-4-CC_STBL_BLKING_

CC-4-CC_STBL_BLKING_

CC-4-CC_BLKD_SVC_INF

CC-4-CC_BLKD_SVC_PAR

CC-4-CC_BLKING_SVC_I

CC-4-CC_BLKING_SVC_P

CC-4-CC_VPCI_OUTOF_R

CC-4-CC_PAKSIZE_ERR

CC-4-CC_PRI_QUEUE_ER

DDTS "pnnisys"

NETB-3-SSIF_TIMER_INIT

NETB-3-SSIF_TIMER_ENAB

NETB-3-PROOT_EP_INIT_F

NETB-3-CC_INIT_FAILED

NETB-3-CLI_INIT_FAILED

NETB-4-SPVCPFX_DEFINIT

NETB-3-VCM_INIT_FAILED

NETB-3-VSIMW_INIT_FAIL

NETB-3-EP_INIT_FAILED

NETB-3-RESYNC_INIT_FAI

NETB-3-soCCBstFail

NETB-6-soCCBstSucc

NETB-3-IPC_MSG_ALLOC_F

NETB-3-IPC_MSG_SEND_FA

NETB-3-VSIMW_INIT2ACT_

NETB-3-VSIMW_INIT2STDB

NETB-3-VSIMW_STDBY2ACT

NETB-4-UNEXPECTED_PROO

NETB-3-RESYNC_STDBY2AC

NETB-3-RESYNC_INIT2STD

NETB-4-CCB_EP_HANDLER_

DDTS "ccm"

CCM-4-CCM_MEM_CONG_IN

CCM-4-CCM_LOGIC_ERROR

CCM-4-CCM_VSI_ERROR

CCM-7-CCM_IFM_UPDT_IN

CCM-4-CCM_IFM_UPDT_ER

CCM-4-CCM_INTF_ERROR

CCM-4-CCM_IPC_ERROR

CCM-4-CCM_MALLOC_ERRO

CCM-4-CCM_INVALID_VAL

CCM-4-CCM_NULL_PTR

CCM-4-CCM_PROV_TREE_C

DDTS "control-point/pxm-connmgm"

CFG_-5-SEMTAKE

CFG_-4-SEMGIVE

CFG_-5-UNINIT_SEM

CFG_-4-SEMCREATE

CFG_-5-BADCARD

CFG_-5-BADFORMAT

CFG_-5-NOTACTIVE

CFG_-4-DRVINIT

CFG_-5-REINIT

CFG_-4-DEVADD

CFG_-5-WRITEOP

CFG_-5-DELETEOP

CFG_-5-CREATEOP

CFG_-5-BADIOCTL

CFG_-5-NOHANDLES

CFG_-5-BAD_HANDLE

DDTS "unknown"

CHS-4-CHS_INIT_ERR

DDTS "CLI"

CLI-4-CLI_ERR_RET

CLI-7-INVDTASK

CLI-4-CLRCFG_CMD_ERR

CLI-4-CLRCFG_NO_STBY

CLI-5-WRITE_FAILED

CLI-2-ATTN_SEVERE_CMD

CLI-7-CMDLOG

CLI-4-CLISMTERMD

CLI-7-CLITNLOG

CLI-7-TELNETD

CLI-4-TELNET_LOGIN_AT

CLI-4-LOGIN_ATTEMPT

CLI-5-AUTHENTICATION

CLI-5-TASKDELETEFAIL

CLI-5-GENERALWARNING

CLI-5-IPCCHANFAIL

CLI-5-IPC_MEM_ALLOC_F

CLI-5-EPIDINSTATEFAIL

CLI-7-INFORMATION

CLI-4-CLI_DB_OP_FAILE

CLI-4-GENERALERROR

CLI-5-NOPROV

CLI-5-NULLMSGDATAPTR

CLI-5-HMMCMDFAILED

CLI-5-HMMINVALIDDATA

CLI-3-CLICNF

CLI-7-BURNBOOT_SIGFIL

CLI-5-BURNBOOT_SIGFIL

DDTS "clocking"

CLK_-2-LOA_ON_UI

CLK_-7-IO_ERR_CLEAR

CLK_-7-FUNC_TRACE

CLK_-7-TRAP_SEND

CLK_-7-ALM_CLR

CLK_-7-ALM_SET

CLK_-7-INVALID_CTC_EVE

CLK_-7-CTC_API_FAILED

CLK_-7-CTC_EVENT_INFO

CLK_-2-CLK_IPC_FAIL

CLK_-4-IPC_CHAN_FAILUR

CLK_-2-IPC_HANDLER_FAI

CLK_-3-IPC_MSG_NULL

CLK_-4-UNKNOWN_PRIORIT

CLK_-4-UNKNOWN_TYPE

CLK_-2-UIBC_INCORRECT

CLK_-2-BC_NOT_VALID

CLK_-2-EPID_RESOLVE_FA

CLK_-2-EPID_CREATE_FAI

CLK_-7-VSISLAVE_EPID_R

CLK_-3-IPC_MSG_DATA_NU

CLK_-3-TASK_STATE

CLK_-3-MSG_NULL

CLK_-3-CLKSOURCES_INCO

CLK_-3-MALLOC_FAIL

CLK_-2-DBINDX_FAIL

CLK_-7-SLOT_MISMATCH

CLK_-2-TIMER_CREATE_FA

CLK_-2-TIMER_SCHEDULE_

CLK_-2-TIMER_CANCEL_FA

CLK_-7-GEN_INFO

CLK_-7-QUALIFY_CLOCK

CLK_-7-SWITCH_CLOCK

CLK_-7-SWITCH_CLOCK_DO

CLK_-7-QUALIFY_CLOCK_D

CLK_-7-CLOCK_LOA

CLK_-7-CLOCK_LOA_CLEAR

CLK_-7-CLOCK_UNLOCKABL

CLK_-7-PHASE_ERROR

CLK_-4-LOCK_TO_NULL_AT

CLK_-4-PROCESS_STBYUPD

CLK_-4-PROCESS_UIREQS_

CLK_-4-PROCESS_SHM_MSG

CLK_-2-STBY_INSERTED_M

CLK_-4-STBY_EVENT_MSG_

CLK_-4-SET_FAILED

CLK_-4-DELETE_FAILED

CLK_-7-CLK_SOURCE_DELE

DDTS "ccma"

CCMA-4-NOIPCBUF

CCMA-4-IPCSENDFAIL

CCMA-4-CREATEEPFAIL

CCMA-4-ATTACHEPFAIL

CCMA-4-CREATETASKFAIL

CCMA-7-CTCEVENTMISMATC

DDTS "control-point"

CNTP-7-MSGSUBS

DDTS "drivers"

COME-4-COMET_ERR

COME-4-COMET_ERR_STR

DDTS "spvc"

CONP-5-WARNING

CONP-7-INFO

CONP-7-DINFO

CONP-4-ERROR

CONP-5-WARNING

CONP-7-INFO

CONP-7-DINFO

CONP-4-ERROR

CONP-5-WARNING

CONP-7-INFO

CONP-7-DINFO

CONP-4-ERROR

DDTS "spvc"

CONP-4-CPI_MSG_DANGLIN

CONP-4-NOT_SES

DDTS "drivers"

ATMI-5-ATMIZER_SARERR

DDTS "cpro"

CPRO-7-GEN_INFO

CPRO-4-TRANSACTION_ERR

CPRO-7-DEL_REQ_NAK_BY_

CPRO-7-VSIS_FIND_RECOR

CPRO-7-CONNCAPEXCEED

CPRO-5-NONEXISTCONN

CPRO-4-PASSTHROREGFAIL

CPRO-7-SYNCRAMERR

CPRO-4-DBMINITFAIL

CPRO-4-CPROTIMERFAIL

CPRO-4-CPROMSGHDLRFAIL

CPRO-4-COMEPCREATEFAIL

CPRO-4-INVALID_CNTRLR_

CPRO-4-SYNCRAMINITFAIL

CPRO-4-ALRM_REG_FAIL

CPRO-3-MISMATCH_CONN

CPRO-7-RINGCONGESTION

CPRO-7-RINGCONGABATE

CPRO-6-UNKNOWN_MSGTYPE

CPRO-3-FLUSHFAIL

CPRO-3-AVLFAIL

CPRO-3-CONNDB_ERR

CPRO-7-CANNOT_FIND_REC

CPRO-7-CPROTASK

CPRO-7-CHKSUM_MISMATCH

CPRO-5-NONEXISTOPSTATE

CPRO-5-EMGETOPSTATEFAI

CPRO-5-NONEXISTADMSTAT

CPRO-5-EMGETADMSTATEFA

CPRO-5-GETOPSTATEFAIL

CPRO-5-GETADMSTATEFAIL

CPRO-4-ADDCHANLOOPFAIL

CPRO-7-DELCHANLOOPFAIL

CPRO-4-NULLRSPPTR

CPRO-4-IPCMSGALLOCFAIL

CPRO-7-IPCMSGSENDSYNCF

CPRO-7-RECFOUNDNOTLPBK

CPRO-7-DALDSPCONNLOOPE

CPRO-7-DSPCHANLOOPFAIL

CPRO-7-SNMP_ERROR

CPRO-4-RAMDISK_ERR

CPRO-7-HOT_STDBY

CPRO-4-PORT_NOT_ADDED

CPRO-4-DISK_DB_UPDATE_

CPRO-4-CONTROLLER_UPDA

CPRO-4-GET_LCN_FAILED

DDTS "infra"

CRDM-2-FATAL_ERROR

CRDM-3-MAJOR_ERROR

CRDM-4-ERROR

CRDM-5-WARNING

CRDM-7-INFO

DDTS "pxm-connmgm"

CSMI-5-CSMIERR

CSMI-5-CSMIERRCODE

CSMI-5-INVALIDDISKUPDA

CSMI-5-INVALIDDBREC

CSMI-5-PSLOTINFOERR

CSMI-5-UNKNOWNCDTYPE

CSMI-5-PIPCSENDERR

CSMI-5-MEMALLOCERR

CSMI-4-INVALIDSLOT

DDTS "config save restore"

CSR-5-CSRERR001

CSR-5-CSRERR002

CSR-7-CSRERR003

CSR-7-CSRERR004

CSR-7-CSRERR005

CSR-5-CSRERR006

CSR-5-CSRERR007

CSR-5-CSRERR008

CSR-7-CSRERR010

CSR-7-CSRERR011

CSR-7-CSRERR012

CSR-5-CSRERR013

CSR-7-CSRERR014

CSR-5-CSRERR015

CSR-7-CSRERR016

CSR-7-CSRERR017

CSR-7-CSRERR018

CSR-7-CSRERR019

CSR-5-CSRERR020

CSR-5-CSRERR021

CSR-5-CSRERR022

CSR-5-CSRERR024

CSR-5-CSRERR025

CSR-7-CSRERR026

CSR-5-CSRERR027

CSR-5-CSRERR028

CSR-5-CSRERR029

CSR-5-CSRERR030

CSR-5-CSRERR031

CSR-5-CSRERR032

CSR-5-CSRERR033

CSR-5-CSRERR034

CSR-5-CSRERR035

CSR-5-CSRERR036

CSR-5-CSRERR037

CSR-5-CSRERR040

CSR-5-CSRERR041

CSR-5-CSRERR042

CSR-5-CSRERR043

CSR-5-CSRERR044

CSR-7-CSRERR045

CSR-7-CSRERR046

CSR-5-CSRERR047

CSR-5-CSRERR048

CSR-5-CSRERR049

CSR-5-CSRERR050

CSR-7-CSRERR051

CSR-7-CSRERR052

CSR-7-CSRERR053

CSR-7-CSRERR054

CSR-5-CSRERR055

CSR-5-CSRERR056

CSR-5-CSRERR057

CSR-5-CSRERR059

CSR-7-CSRERR060

CSR-7-CSRERR061

CSR-7-CSRERR062

CSR-5-CSRERR063

CSR-5-CSRERR064

CSR-7-CSRERR065

CSR-5-CSRERR066

CSR-7-CSR_ABORT

CSR-7-CSRDBRST

CSR-7-CSRDBUPD

CSR-5-CSRERR068

CSR-7-SVALLCNF_DONE

CSR-5-SVALLCNF_WARNIN

CSR-5-CSRERR069

CSR-5-CSRERR070

CSR-5-CSRERR071

CSR-5-CSRERR073

CSR-5-CSRERR074

CSR-5-CSRERR075

CSR-5-CSRERR076

CSR-5-CSRERR077

CSR-7-CSRERR078

CSR-5-CSRERR079

CSR-7-CSRERR080

CSR-7-CSRERR081

CSR-7-CSRERR082

CSR-7-CSRERR083

CSR-7-MINICSRINFO

CSR-5-MINICSRWARNING

CSR-5-FLAG_RESET_ERR

CSR-5-ZIPAPIERR_001

CSR-5-ZIPAPIERR_002

CSR-5-ZIPAPIERR_003

CSR-5-ZIPAPIERR_004

CSR-5-ZIPAPIERR_005

CSR-5-ZIPAPIERR_006

CSR-5-ZIPAPIERR_007

CSR-1-CSRERR084

CSR-5-CSRERR085

CSR-7-CSRERR086

CSR-5-CSRERR087

CSR-5-CSRERR088

CSR-5-CSRERR089

CSR-5-INVSESNPTR

CSR-5-SESNTIME_ERR

CSR-5-ZIPAPIERR_008

DDTS "ccma"

CSTA-5-LOG

DDTS "ctc"

CTC-4-INVALID_CARD_RO

CTC-5-TIMERCANERR

CTC-4-ST_CHG_CMD_ERR1

CTC-4-ST_CHG_CMD_ERR2

CTC-7-ST_CHG_CMD_ERR3

CTC-7-TIMER_POP

CTC-7-RESET_LOCAL_CD

CTC-5-INVALID_STAGE

CTC-4-INVALID_INIT_CO

CTC-5-INVALID_APP_RES

CTC-4-INVALID_TIMEOUT

CTC-3-TIMER_SET_FAILE

CTC-2-LC_EVENT_FAILED

CTC-2-CD_EVENT_FAILED

CTC-3-INIT_TIMEOUT

CTC-3-ACT_RDY_TIMEOUT

CTC-3-ACT_NOP_TIMEOUT

CTC-3-ACT_QUIES_TIMEO

CTC-4-STBY_RDY_TIMEOU

CTC-4-STBY_LOCK_TIMEO

CTC-4-DIAG_RDY_TIMEOU

CTC-4-STAGE_INIT_TIME

CTC-2-INTERNAL_EVENT

CTC-2-APP_STATE_FAILE

CTC-4-INVALID_STATE

CTC-4-INVALID_EVENT

CTC-4-INVALID_STATE_C

DDTS "ctc"

CTC-4-PARAMINVALID

CTC-4-UNINITIALIZEDAT

CTC-4-NULLDATAPTR


CBC-4-CBC_UTIL_ERR

SEVERITY: Error
FORMAT: "Err %s() params %d,%d,%d,%d %s"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "RAM access failed."
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: No Required Info

CBC-4-CBC_HMM_ERR

SEVERITY: Error
FORMAT: "%s() cbc_num=%d,%d,%d,%d %s"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "CBC HMM Event."
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: No Required Info

CBC-5-INVALID_ARG

SEVERITY: Warning
FORMAT: "Invalid Argument glcn=%d, %s"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "CBC routines are called with Invalid arguments"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: No Required Info

DDTS "signaling"

CC-4-CC_ACT_LEAF_QUE

SEVERITY: Error
FORMAT: "CC Func:%s ERR:%s IfId:%d Vpi:%d Vci:%d Routing Pri:%d Bw Group:%d\n"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Error in Priority Routing This can happen if enqueue/dequeue to/from active SVC release priority queue fails"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs:
a) General: dspver, depcds, dsplog, dsperr, dspmempart
b) Interface: dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection: dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion: dsppnportcc, dspsvcparm,
e) Topology: dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-4-CC_SVC_QUEUING_

SEVERITY: Error
FORMAT: "CC Func:%s ERR:%s LogItf:%p Vpi:%d Vci:%d Routing Pri:%d\n"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Error in Priority Routing This can happen if enqueue/dequeue to/from in-progress SVC release priority queue fails"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs:
a) General: dspver, depcds, dsplog, dsperr, dspmempart
b) Interface: dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection: dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion: dsppnportcc, dspsvcparm,
e) Topology: dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

SIGA-4-SIGAPI_ERROR

SEVERITY: Error
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Signalling error, Please See the format string of this event for detailed explanation"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

SIGA-5-SIGAPI_WARNING

SEVERITY: Warning
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Signalling warning, Please See the format string of this event for detailed explanation.
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

SIGA-5-SIGAPI_CRITICAL

SEVERITY: Warning
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Signalling critical warning, Please See the format string of this event for detailed explanation.
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

SIGA-7-SIGAPI_INFO

SEVERITY: Information
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Generic SIGAPI Info, Please See the format string of this event for detailed explanation.
RECOMMENDED ACTION: "NO RECOMMENDED ACTION"
REQUIRED INFO: "NO REQUIRED INFO"

SIGA-6-SIGAPI_NOTICE

SEVERITY: Notice
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Generic SIGAPI Notice, Please See the format string of this event for detailed explanation.
RECOMMENDED ACTION: "NO RECOMMENDED ACTION"
REQUIRED INFO: "NO REQUIRED INFO"

SIGA-4-SIGAPI_NULL_PTR

SEVERITY: Error
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Software Error -- Unexpected Null pointer Found"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

PT-7-PT_INFORMATIVE

SEVERITY: Information
FORMAT: "%s"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "Informative event for path trace"
RECOMMENDED ACTION: "NO RECOMMENDED ACTION"
REQUIRED INFO: "NO REQUIRED INFO"

CC-4-CC_MALLOC_ERROR

SEVERITY: Error
FORMAT: "CC/%s, NoMemory,Ptr%d\n"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Cann't allocate memory for call control, furture signalling msg might be dropped"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-4-CC_IPC_ERROR

SEVERITY: Error
FORMAT: "CC/%s, IPCErr,MsgType%d\n"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "Failed to send call control msg by IPC, Please Look for IPC Event Log For Explanation"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-4-CC_TIMER_START_

SEVERITY: Error
FORMAT: "CC/%s,StartTmrErr,Tmr%s Del%d Loc%d\n"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "Couldn't start timer"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-4-CC_TIMER_STOP_E

SEVERITY: Error
FORMAT: "CC/%s, StopTmrErr,Tmr%s Loc%d\n"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "Couldn't stop timer"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-4-CC_MEMINIT_ERRO

SEVERITY: Error
FORMAT: "CC/%s;Err%s heap%s\n"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "Memory initialization error for signalling"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-4-CC_MEMALLOC_ERR

SEVERITY: Error
FORMAT: "CC/%s;Err%s blkType%d\n"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Couldn't allocate memory for signalling"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-4-CC_MEMASSIGN_ER

SEVERITY: Error
FORMAT: "CC/%s;MemName%s MemPtr0x%x\n"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "Couldn't assign memory for signalling"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-4-CC_ALLREL_ERROR

SEVERITY: Error
FORMAT: "CC/%s;Err%d\n"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "No Active Call Stats"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-7-ATMSIG_BSE_LOG

SEVERITY: Information
FORMAT: "%s\n"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Informative String Logged"
RECOMMENDED ACTION: "NO RECOMMENDED ACTION"
REQUIRED INFO: "NO REQUIRED INFO"

CC-4-CC_SCALING_ERRO

SEVERITY: Error
FORMAT: "CC/%s;Err%s\n"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Signalling Scaling Error Occured, couldn't scale/descale call info correctly"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-4-CC_SCALING_ERRL

SEVERITY: Error
FORMAT: "CC/%s;ERR%s,ifid%d, vpi%d, vci%d\n"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Signalling Scaling Error Occured, couldn't scale/descale call info correctly"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-7-CC_SCALING_INFO

SEVERITY: Information
FORMAT: "CC/%s;INFO%s,ifid %x vpi %x vci %x\n"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Informative event log"
RECOMMENDED ACTION: "NO RECOMMENDED ACTION"
REQUIRED INFO: "NO REQUIRED INFO"

CC-4-CC_NULL_PTR

SEVERITY: Error
FORMAT: "CC/%s;Err%s\n"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Software Error -- Unexpected Null pointer Found"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-7-CC_DEL_TH_LOG

SEVERITY: Information
FORMAT: "%s\n"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Informative event log"
RECOMMENDED ACTION: "NO RECOMMENDED ACTION"
REQUIRED INFO: "NO REQUIRED INFO"

CC-4-CC_TRF_REF_COUN

SEVERITY: Error
FORMAT: "CC Func%s;Loc%d\n"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "TRF reference count error occured"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-7-CRANKBACK_LOG

SEVERITY: Information
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Informative event log"
RECOMMENDED ACTION: "NO RECOMMENDED ACTION"
REQUIRED INFO: "NO REQUIRED INFO"

CC-7-STATIC_LOOP_LOG

SEVERITY: Information
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Informative event log"
RECOMMENDED ACTION: "NO RECOMMENDED ACTION"
REQUIRED INFO: "NO REQUIRED INFO"

CC-4-CC_SVC_AUDIT

SEVERITY: Error
FORMAT: "CC/Audit expired svc port=%x, callref=%x, state=%d \n"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Error Detected by SVC Audit"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-4-CC_INV_RET_TYPE

SEVERITY: Error
FORMAT: "CC Func%s;ErrFunc%s\n"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "Audit StatEnq return invalid Status"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-4-CC_NULL_PTR_ERR

SEVERITY: Error
FORMAT: "CC Func%s;Ptr%s;Loc%d\n"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "Software Error -- Unexpected Null pointer Found"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-4-CC_EXCEEDS_MAX_

SEVERITY: Error
FORMAT: "CC Func%s;Loc%d\n"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "Max number of interface reached"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-4-CC_AUDIT_TRIGGE

SEVERITY: Error
FORMAT: "CC Func%s\n"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "Audit trigger too soon"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-4-CC_COUNTER_ALRE

SEVERITY: Error
FORMAT: "CC Func%s; Counter%s;Loc%d\n"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "Counter is zero already"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-4-CC_INVALID_VALU

SEVERITY: Error
FORMAT: "CC Func%s; Var%s;Val%x;Loc%d\n"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "Software error -- Invalid variable value get assigned"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-4-CC_AUD_REL

SEVERITY: Error
FORMAT: "CC Func:%s; logItf:%ld;callRef:%ld,endptRef:%d\n"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "Audit to release the call"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs:
a) General: dspver, depcds, dsplog, dsperr, dspmempart
b) Interface: dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection: dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion: dsppnportcc, dspsvcparm,
e) Topology: dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-7-CC_AUD_IN_PROG

SEVERITY: Information
FORMAT: "CC Func%s; Loc%d\n"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "Call Audit in progress"
RECOMMENDED ACTION: "NO RECOMMENDED ACTION"
REQUIRED INFO: "NO REQUIRED INFO"

CC-7-CC_SWO_CONGESTI

SEVERITY: Information
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Informative event log"
RECOMMENDED ACTION: "NO RECOMMENDED ACTION"
REQUIRED INFO: "NO REQUIRED INFO"

CC-4-CC_AUD_SPVC_MAS

SEVERITY: Error
FORMAT: "CC Func%s, IfId%d, Vpi%d, Vci%d\n"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Audit release master SPVC"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-4-CC_AUD_SPVC_SLA

SEVERITY: Error
FORMAT: "CC Func%s, IfId%d, Vpi%d, Vci%d\n"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Audit release slave SPVC"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-4-CC_STBL_BLKD_IN

SEVERITY: Error
FORMAT: "%d, %d, %ld, %d %d %ld %s %d\n"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "active root/leaf can not be inserted to vp-vc tree or call ref tree"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-4-CC_STBL_BLKD_PA

SEVERITY: Error
FORMAT: "%ld %d %d %ld %d\n"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "active root/leaf can not be inserted to vp-vc tree or call ref tree"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-4-CC_STBL_BLKING_

SEVERITY: Error
FORMAT: "%ld %d %d %ld %d\n"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "May not be able to insert active root/leaf into vp-vc tree or call ref tree"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-4-CC_STBL_BLKING_

SEVERITY: Error
FORMAT: "%ld %d %d %ld %d\n"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "May not be able to insert active root/leaf into vp-vc tree or call ref tree"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-4-CC_BLKD_SVC_INF

SEVERITY: Error
FORMAT: "%d %d %ld %d %d %ld %d %d %d %d %d %s %d\n"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "SVC can not be inserted to vp-vc tree or call ref tree"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-4-CC_BLKD_SVC_PAR

SEVERITY: Error
FORMAT: "%ld %d %d %ld %d %d %d %d %d %d"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "SVC can not be inserted to vp-vc tree or call ref tree"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-4-CC_BLKING_SVC_I

SEVERITY: Error
FORMAT: "%ld %d %d %ld %d %d %d %d %d %d %d\n"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "May not be able to insert SVC into vp-vc tree or call ref tree"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-4-CC_BLKING_SVC_P

SEVERITY: Error
FORMAT: "%ld %d %d %ld %d %d %d %d %d %d %d\n"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "May not be able to insert SVC into vp-vc tree or call ref tree"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-4-CC_VPCI_OUTOF_R

SEVERITY: Error
FORMAT: "CC Func%s,IfId%d,Vpi%d,Vci%d,minVpi%d,minVci%d,maxVpi%d,maxVci%d\n"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "VPI/VCI out of range"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-4-CC_PAKSIZE_ERR

SEVERITY: Error
FORMAT: "CC/%s,pakSizeTooSmall,size%d minSize%d pak0x%x\n"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Not enough buffer available for atmsig request"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

CC-4-CC_PRI_QUEUE_ER

SEVERITY: Error
FORMAT: "CC Func%s Loc%d Err%s\n"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "Error in Priority Routing Utilty Function This can happen if an invalid condition is encountered during queue handling"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Please collect the output of CLIs
a) General dspver, depcds, dsplog, dsperr, dspmempart
b) Interface dsppnports, dsppnport, dsppnportrsrc, dsppnportcac, dsppnportsig,
c) Connection dsppncons, dspcons, dspsigstats, dsppnctlvc,
d) Congestion dsppnportcc, dspsvcparm,
e) Topology dsppnni-reachable-addr, dsppnni-routing-policy, dsppnni-path, dsppnni-link.

DDTS "pnnisys"

NETB-3-SSIF_TIMER_INIT

SEVERITY: Minor Alert
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Error in initializing internal data structure"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.

NETB-3-SSIF_TIMER_ENAB

SEVERITY: Minor Alert
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Error in initializing internal data structure"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.

NETB-3-PROOT_EP_INIT_F

SEVERITY: Minor Alert
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Error in initializing IPC data structure"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.

NETB-3-CC_INIT_FAILED

SEVERITY: Minor Alert
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Error in initializing internal data structure"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.

NETB-3-CLI_INIT_FAILED

SEVERITY: Minor Alert
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Error in initializing internal data structure"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.

NETB-4-SPVCPFX_DEFINIT

SEVERITY: Error
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Error in initializing internal data structure"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.

NETB-3-VCM_INIT_FAILED

SEVERITY: Minor Alert
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Error in initializing internal data structure"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.

NETB-3-VSIMW_INIT_FAIL

SEVERITY: Minor Alert
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Error in initializing internal data structure"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.

NETB-3-EP_INIT_FAILED

SEVERITY: Minor Alert
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Error in initializing IPC data structure"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.

NETB-3-RESYNC_INIT_FAI

SEVERITY: Minor Alert
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Error in initializing internal data structure"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.

NETB-3-soCCBstFail

SEVERITY: Minor Alert
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Error while processing card state transition"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.

NETB-6-soCCBstSucc

SEVERITY: Notice
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Useful debugging information"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

NETB-3-IPC_MSG_ALLOC_F

SEVERITY: Minor Alert
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Error in IPC message allocation"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.

NETB-3-IPC_MSG_SEND_FA

SEVERITY: Minor Alert
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Error in sending IPC message"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.

NETB-3-VSIMW_INIT2ACT_

SEVERITY: Minor Alert
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Error while processing card state transition"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.

NETB-3-VSIMW_INIT2STDB

SEVERITY: Minor Alert
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Error while processing card state transition"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.

NETB-3-VSIMW_STDBY2ACT

SEVERITY: Minor Alert
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Error while processing card state transition"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.

NETB-4-UNEXPECTED_PROO

SEVERITY: Error
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Received invalid event in current state"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.

NETB-3-RESYNC_STDBY2AC

SEVERITY: Minor Alert
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Error while processing card state transition"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.

NETB-3-RESYNC_INIT2STD

SEVERITY: Minor Alert
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Error while processing card state transition"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.

NETB-4-CCB_EP_HANDLER_

SEVERITY: Error
FORMAT: "[PnCCB]ssiIpcComEpWait errno %d \n"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Error in processing IPC message"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog, dspmempart can be sent to the Cisco Customer support.

DDTS "ccm"

CCM-4-CCM_MEM_CONG_IN

SEVERITY: Error
FORMAT: "CCM Func:%s; Var:%s;Val1:%d;Val2:%d\n"
FLAG: Stack Trace
THROTTLING: No Throttling
EXPLANATION: "Invalid value received in API"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog -mod CCM and dsplog -mod IFM can be sent to the Cisco Customer support.

CCM-4-CCM_LOGIC_ERROR

SEVERITY: Error
FORMAT: "CCM/%s, %s error, type=%d, intf=%d, st=%d\n"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "The interface type passed in the API is invalid"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog -mod CCM and dsplog -mod IFM can be sent to the Cisco Customer support.

CCM-4-CCM_VSI_ERROR

SEVERITY: Error
FORMAT: "CCM/%s, %s error, type=%d, numIntf=%d\n"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "Invalid event received in the module API"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog -mod CCM and dsplog -mod IFM can be sent to the Cisco Customer support.

CCM-7-CCM_IFM_UPDT_IN

SEVERITY: Information
FORMAT: "CCM/%s, %s info, cmd=%d, logid=%d\n"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Useful debugging information"
RECOMMENDED ACTION: No action required
REQUIRED INFO: No Required Info

CCM-4-CCM_IFM_UPDT_ER

SEVERITY: Error
FORMAT: "CCM/%s, %s error, cmd=%d, logid=%d\n"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "Invalid update information received by this module"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog -mod CCM and dsplog -mod IFM can be sent to the Cisco Customer support.

CCM-4-CCM_INTF_ERROR

SEVERITY: Error
FORMAT: "CCM/%s, error in %s\n"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "Invalid interface event received by this module"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog -mod CCM and dsplog -mod IFM can be sent to the Cisco Customer support.

CCM-4-CCM_IPC_ERROR

SEVERITY: Error
FORMAT: "CCM/%s, ipc error in %s, errno %d \n"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "General IPC message error for this module"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog -mod CCM and dsplog -mod IFM can be sent to the Cisco Customer support.

CCM-4-CCM_MALLOC_ERRO

SEVERITY: Error
FORMAT: "CCM/%s, memory alloc error in %s \n"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "Memory allocation error"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog -mod CCM and dsplog -mod IFM can be sent to the Cisco Customer support.

CCM-4-CCM_INVALID_VAL

SEVERITY: Error
FORMAT: "CCM Func%s; Var%s;Val%x;Loc%d\n"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "Invalid value received in API"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog -mod CCM and dsplog -mod IFM can be sent to the Cisco Customer support.

CCM-4-CCM_NULL_PTR

SEVERITY: Error
FORMAT: "CCM/%s;Err%s\n"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "Invalid address error"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog -mod CCM and dsplog -mod IFM can be sent to the Cisco Customer support.

CCM-4-CCM_PROV_TREE_C

SEVERITY: Error
FORMAT: "LogIntfId %ld;Loc%d\n"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "SVCs present on interface in invalid state"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: On PXM cli the output of the following commands dspver, dspcds, dspdate, dsppnports, dspsigstats, dsppncons, dsppnctlvc, dsplog -mod CCM and dsplog -mod IFM can be sent to the Cisco Customer support.

DDTS "control-point/pxm-connmgm"

CFG_-5-SEMTAKE

SEVERITY: Warning
FORMAT: "ssiSemTake failed for %s with errno %x"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "CFG_FTP API failed to get semaphore, hence cannot access file descriptor table"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CFG_-4-SEMGIVE

SEVERITY: Error
FORMAT: "ssiSemGive failed for with errno %x"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "CFG_FTP API failed to give semaphore, hence no FTP access to configuration files on legacy SM's."
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Capture the followings
1) dsplog -mod CFG_FTP
2) dsplog
3) dspversion

CFG_-5-UNINIT_SEM

SEVERITY: Warning
FORMAT: "Uninitialized semaphore"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "The semaphore protecting the file descriptor table hasn't been created. No access until it is."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CFG_-4-SEMCREATE

SEVERITY: Error
FORMAT: "ssiSemCreate failed for %s with errno %x"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "FAS API failed to create fasLfdSem semaphone, hence Remote file server will be frozen"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Capture the followings
1) dsplog -mod CFG_FTP
2) dsplog
3) dspversion

CFG_-5-BADCARD

SEVERITY: Warning
FORMAT: "Request refused because the card in slot %d is of type %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "The request specified a slot that doesn't contain an appropriate card type."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CFG_-5-BADFORMAT

SEVERITY: Warning
FORMAT: "Invalid file name format %s"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "File name format must be SM_<shelf>_<slot>.CF"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CFG_-5-NOTACTIVE

SEVERITY: Warning
FORMAT: "Open request rejected because current state is not ACTIVE"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Only the active PXM may process FTP pseudo-driver requests"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CFG_-4-DRVINIT

SEVERITY: Error
FORMAT: "iosDrvInstall() failed errno %x, while initing CFG FTP Driver"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "iosDrvInstall() failed while initing CFG FTP Driver; No FTP access to configuration files on legacy SM's."
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Capture the followings
1) dsplog -mod CFG_FTP
2) dsplog
3) dspversion

CFG_-5-REINIT

SEVERITY: Warning
FORMAT: "The cfg upload pseudo-driver has already been initialized."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "The cfg upload pseudo-driver may be initialized only once."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CFG_-4-DEVADD

SEVERITY: Error
FORMAT: "Device registration failed with errno %x, for logical partition '%s'"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Device registration failed for a logical partition. No FTP access to configuration files on legacy SM's."
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Capture the followings
1) dsplog -mod CFG_FTP
2) dsplog
3) dspversion

CFG_-5-WRITEOP

SEVERITY: Warning
FORMAT: "Write op is not supported by the CFG FTP driver"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Write op is not supported by the CFG FTP driver"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CFG_-5-DELETEOP

SEVERITY: Warning
FORMAT: "Delete op is not supported by the CFG FTP driver"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Delete op is not supported by the CFG FTP driver"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CFG_-5-CREATEOP

SEVERITY: Warning
FORMAT: "Create op is not supported by the CFG FTP driver"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Create op is not supported by the CFG FTP driver"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CFG_-5-BADIOCTL

SEVERITY: Warning
FORMAT: "The CFG FTP driver doesn't support IOCTL function %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "The IOCTL function only supports FIOSTATGET"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CFG_-5-NOHANDLES

SEVERITY: Warning
FORMAT: "No file descriptor were available."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "No file descriptors were available."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CFG_-5-BAD_HANDLE

SEVERITY: Warning
FORMAT: "An invalid file table index was passed %d"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "Operation failed out-of-range or invalid file handle"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

DDTS "unknown"

CHS-4-CHS_INIT_ERR

SEVERITY: Error
FORMAT: "CHS Task Init Failed"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Channel initialization failed."
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. If you cannot determine the nature of the error from the error message text or from the 'dsperr' output, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: No Required Info

DDTS "CLI"

CLI-4-CLI_ERR_RET

SEVERITY: Error
FORMAT: "%s(): failed errno=%d"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "A call to the above function failed. The reason for the failure is in errno."
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. Do the same with 'dsplog' command. If you cannot determine the nature of the error from the error message text or from the 'dsperr'/'dsplog' output, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: "Please capture information related to this error from dsperr and dsplog commands."

CLI-7-INVDTASK

SEVERITY: Information
FORMAT: "%s: stray SSI_TID 0x%x (%s) has been deleted"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "The task with given task id has been deleted."
RECOMMENDED ACTION: No action required
REQUIRED INFO: No Required Info

CLI-4-CLRCFG_CMD_ERR

SEVERITY: Error
FORMAT: "%s"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "clrcnf/clrallcnf command on the PXM didnot go thru."
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. Do the same with 'dsplog' command. If you cannot determine the nature of the error from the error message text or from the 'dsperr'/'dsplog' output, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Capture the output of the CLI commands, dsperr, dsplog and collect the coredump file if a coredump occurred.

CLI-4-CLRCFG_NO_STBY

SEVERITY: Error
FORMAT: "%s"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "clrallcnf/clrcnf command is executed when standby PXM is not present. If the standby PXM is physically not inserted then there are no consequences, otherwise make sure that the standby PXM remains/comes-up as standby. If you ohserve that the standby PXM came up Active even after clrallcnf/clrcnf then perfrom clrallcnf/clrcnf again. If this is not done it could lead to residual databases."
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. Do the same with 'dsplog' command. If you cannot determine the nature of the error from the error message text or from the 'dsperr'/'dsplog' output, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Capture the output of the CLI commands, dsperr, dsplog and collect the coredump file if a coredump occurred.

CLI-5-WRITE_FAILED

SEVERITY: Warning
FORMAT: "%d: errno 0x%x, session 0x%x, epid %s %s."
FLAG: No Flag
THROTTLING: One Minute
EXPLANATION: "CLI intercard write failed due to communication end-point resolve failure."
RECOMMENDED ACTION: No action required
REQUIRED INFO: "Capture information related to this error from dsperr and dsplog commands."

CLI-2-ATTN_SEVERE_CMD

SEVERITY: Major Alert
FORMAT: "User %s@%s attempting to execute %c%1.80s%c."
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "A user is attempting to execute a command which could potentially be service impacting. The event is logged before the command is actually executed since the execution of the command could reset the node."
RECOMMENDED ACTION: "This event is an indication that a command that could change the system configuration in some way is being executed by a user. If the command was executed intentionally for a known reason then this event can be disregarded. If however, the command was executed accidentally or without permission then please contact TAC ."
REQUIRED INFO: " Execute the dsplog, dsperr, dsprev commands to gather the basic information. Depending on the severe command executed additional information may need to be collected. Please contact TAC for further details"

CLI-7-CMDLOG

SEVERITY: Information
FORMAT: "cliCmdLog %s@%s %c%1.80s%c."
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "The above command was entered by the user ."
RECOMMENDED ACTION: No action required
REQUIRED INFO: No Required Info

CLI-4-CLISMTERMD

SEVERITY: Error
FORMAT: "cliSmtermd %s() failed"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "A call to the above function failed. The reason for the failure is listed"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. Do the same with 'dsplog' command. If you cannot determine the nature of the error from the error message text or from the 'dsperr'/'dsplog' output, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: "Please capture information related to this error from dsperr and dsplog commands."

CLI-7-CLITNLOG

SEVERITY: Information
FORMAT: "cliTelnetd client@%s %s"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "A telnet session was attempted by the user."
RECOMMENDED ACTION: No action required
REQUIRED INFO: No Required Info

CLI-7-TELNETD

SEVERITY: Information
FORMAT: "socket %d, l_onoff %d, l_linger %d, linger addr 0x%x, %d.%d.%d.%d"
FLAG: Write to Bram
THROTTLING: No Throttling
EXPLANATION: "A telnet session was attempted by the user."
RECOMMENDED ACTION: No action required
REQUIRED INFO: No Required Info

CLI-4-TELNET_LOGIN_AT

SEVERITY: Error
FORMAT: "%s User %s@ %d.%d.%d.%d attempted to login thrice with incorrect password "
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "Specified user tried to login thrice unsuccessfully"
RECOMMENDED ACTION: No action required
REQUIRED INFO: "The event will mention the ip-address that the user tried to login at. That may help to locate the source of the problem. The event will also indicate the exact time when this occured"

CLI-4-LOGIN_ATTEMPT

SEVERITY: Error
FORMAT: "%s User %s@%s attempted to login thrice with incorrect password "
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "Specified user tried to login thrice unsuccessfully"
RECOMMENDED ACTION: No action required
REQUIRED INFO: "The user tried to login unsuccessfully using the console. The event will indicate the exact time when this occured"

CLI-5-AUTHENTICATION

SEVERITY: Warning
FORMAT: "%s@%s %s"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "Could not send Login/Logout SNMP trap for CLI session."
RECOMMENDED ACTION: No action required
REQUIRED INFO: No Required Info

CLI-5-TASKDELETEFAIL

SEVERITY: Warning
FORMAT: "%s: ssiTaskDelete(%s: 0x%X): failed for %d trials in %d seconds with errno=%d"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "The task with given task id couldn't be deleted."
RECOMMENDED ACTION: No action required
REQUIRED INFO: No Required Info

CLI-5-GENERALWARNING

SEVERITY: Warning
FORMAT: "%s %s %s %s"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "Problems caused by routine calls that need attention."
RECOMMENDED ACTION: No action required
REQUIRED INFO: No Required Info

CLI-5-IPCCHANFAIL

SEVERITY: Warning
FORMAT: "ssiIpcMessageSendSync failed, with rc=%d, and cmdType returned =%d"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "The IPCmsgs got muddled up with someother cli msg."
RECOMMENDED ACTION: No action required
REQUIRED INFO: No Required Info

CLI-5-IPC_MEM_ALLOC_F

SEVERITY: Warning
FORMAT: "ssiMalloc failed, for cmdType = %d"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "System Could not allocate memory."
RECOMMENDED ACTION: No action required
REQUIRED INFO: No Required Info

CLI-5-EPIDINSTATEFAIL

SEVERITY: Warning
FORMAT: "Unable to get end point. hmmEpid = %d"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "Port id could not be obtained for specified phy slot."
RECOMMENDED ACTION: No action required
REQUIRED INFO: No Required Info

CLI-7-INFORMATION

SEVERITY: Information
FORMAT: "%s %s"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "Information about the tasks carried out by CLI"
RECOMMENDED ACTION: No action required
REQUIRED INFO: No Required Info

CLI-4-CLI_DB_OP_FAILE

SEVERITY: Error
FORMAT: "Db operation failed with errno = %d"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "Database operations in the cli context failed."
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. Do the same with 'dsplog' command. If you cannot determine the nature of the error from the error message text or from the 'dsperr'/'dsplog' output, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: "Please capture information related to this error from dsperr and dsplog commands."

CLI-4-GENERALERROR

SEVERITY: Error
FORMAT: "%s %s %s 0x%x"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "Problem caused by certain conditions that need attention. Here are some potential problems Errors related to semaphore, Errors related to parameter validation, etc"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. Do the same with 'dsplog' command. If you cannot determine the nature of the error from the error message text or from the 'dsperr'/'dsplog' output, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: "Please capture information related to this error from dsperr and dsplog commands."

CLI-5-NOPROV

SEVERITY: Warning
FORMAT: "Failed change state to NO PROV taskName%s taskIDPtr%p cmd%s tick%lu"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "Problems caused by routine calls that need attention."
RECOMMENDED ACTION: No action required
REQUIRED INFO: No Required Info

CLI-5-NULLMSGDATAPTR

SEVERITY: Warning
FORMAT: "NULL message data pointer returned from HMM"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "Failed to get crossbar error information from the HMM task."
RECOMMENDED ACTION: No action required
REQUIRED INFO: No Required Info

CLI-5-HMMCMDFAILED

SEVERITY: Warning
FORMAT: "HMM returned error code (%d) from request for crossbar error information"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "Failed to get crossbar error information from the HMM task."
RECOMMENDED ACTION: No action required
REQUIRED INFO: No Required Info

CLI-5-HMMINVALIDDATA

SEVERITY: Warning
FORMAT: "HMM returned invalid message data %d"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "The HMM task provided invalid crossbar error information."
RECOMMENDED ACTION: No action required
REQUIRED INFO: No Required Info

CLI-3-CLICNF

SEVERITY: Minor Alert
FORMAT: "%d %s"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "A call to the above function failed. The reason for the failure is listed
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log. Issue the 'dsperr' command from the PXM to gather data that may provide information to determine the nature of the error. Do the same with 'dsplog' command. If you cannot determine the nature of the error from the error message text or from the 'dsperr'/'dsplog' output, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: "Please capture information related to this error from dsperr and dsplog commands."

CLI-7-BURNBOOT_SIGFIL

SEVERITY: Information
FORMAT: "Burnboot signature file contents [%s]."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Signature file was created with following contents."
RECOMMENDED ACTION: No action required
REQUIRED INFO: No Required Info

CLI-5-BURNBOOT_SIGFIL

SEVERITY: Warning
FORMAT: "Burnboot signature file creation failed. %s."
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "Burnboot signature file creation failed. This message identifies what exactly went wrong."
RECOMMENDED ACTION: No action required
REQUIRED INFO: No Required Info

DDTS "clocking"

CLK_-2-LOA_ON_UI

SEVERITY: Major Alert
FORMAT: "No signal detected on local oscillator : Detected by module = %s "
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "There is no signalling activity on the local oscillatior The crystal on the UI-S3 back card is not present or not good."
RECOMMENDED ACTION: Follow the below steps:
1. On PXM: Do a dspcd to verify that the Back card
is valid for the specific front card. Else rectify this.
2. Do a dspclockinfo in the shellConn and verify that the IO
BUffers are enabled.
3. Call TAC support
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-7-IO_ERR_CLEAR

SEVERITY: Information
FORMAT: "%s: IO Buffers were found in alarm but it was cleared "
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "HMM detected IO Buffer in error but enabling buffers cleared the alarm"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-7-FUNC_TRACE

SEVERITY: Information
FORMAT: "CLK FUNC TRACE Stepped into function %s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: " This event is to trace the logic flow"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CLK_-7-TRAP_SEND

SEVERITY: Information
FORMAT: "%s Clock status Trap Send Status %s "
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: " This event is to trace the logic flow"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CLK_-7-ALM_CLR

SEVERITY: Information
FORMAT: "CLEARED %s "
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Clock Alarm was cleared"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: No Required Info

CLK_-7-ALM_SET

SEVERITY: Information
FORMAT: " %s "
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Clock Alarm was raised"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: No Required Info

CLK_-7-INVALID_CTC_EVE

SEVERITY: Information
FORMAT: "CLK INFO Invalid CTC Event %d "
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "The Clock Task received unknown CTC Event"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CLK_-7-CTC_API_FAILED

SEVERITY: Information
FORMAT: "CLK INFO %s "
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "The Clock Task Called a CTC API that failed"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CLK_-7-CTC_EVENT_INFO

SEVERITY: Information
FORMAT: "CLK CTC EVENT HNDLR Ctc event %s Received"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "CTC EVENT HANDLER, TRACE"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CLK_-2-CLK_IPC_FAIL

SEVERITY: Major Alert
FORMAT: "CLK IPC CHANNEL FAILURE Detected by module = %s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "IPC Channed Failed, Clock Functionality may be affected"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-4-IPC_CHAN_FAILUR

SEVERITY: Error
FORMAT: "The SSI_RCVID is null, rcvIdPtr=0x%x"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "IPC mechanism did not pass the receivers id."
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-2-IPC_HANDLER_FAI

SEVERITY: Major Alert
FORMAT: "CLK IPC CHANNEL FAILURE Detected by module = %s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Clock Manager IPC Handler can not be attached, NwClkMgr task deleted"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-3-IPC_MSG_NULL

SEVERITY: Minor Alert
FORMAT: "CLK module = %s, IPC Message is Null"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "IPC Channel Failed , Clock Functionality may be affected"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-4-UNKNOWN_PRIORIT

SEVERITY: Error
FORMAT: "UNKNOWN CLOCK PRIORITY Detected by module = %s , priority = %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "CLK SOURCE PRIORITY UNKNOWN, CONFIGURATION REQUEST FAILED"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-4-UNKNOWN_TYPE

SEVERITY: Error
FORMAT: "UNKNOWN CLK TYPE Detected by module = %s , Type = %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "CLK SOURCE TYPE UNKNOWN, CONFIGURATION REQUEST FAILED"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-2-UIBC_INCORRECT

SEVERITY: Major Alert
FORMAT: "WRONG CLOCK BACKCARD Type = %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "CLK UI BACK CARD NOT UIS3, CLOCK NOT CONFIGURED"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-2-BC_NOT_VALID

SEVERITY: Major Alert
FORMAT: "CLK BC NOT VALID/NOT INSERTED Detected by module = %s "
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Either the UI_S3 Back card is not present or it is not a UI-S3 back card or the Back card NovRam might not be programmed or the IO buffers are disabled"
RECOMMENDED ACTION: Follow the below steps
1. On PXM Do a dspcd to verify that the Back card
is valid for the specific front card. Else rectify this.
2. Do a dspclockinfo in the shellConn and verify that the IO
BUffers are enabled.
3. Call TAC support
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-2-EPID_RESOLVE_FA

SEVERITY: Major Alert
FORMAT: "CLK TASK STBY EPID INVALID"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "ACTIVE CLK TASK CAN NOT RESOLVE STBY EPID, CLOCK UPDATES NOT SEND"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-2-EPID_CREATE_FAI

SEVERITY: Major Alert
FORMAT: "CLK TASK EPID CREATION FAILED Detected by module = %s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Clock Manager Epid can not be created. NwClkMgr Task deleted"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-7-VSISLAVE_EPID_R

SEVERITY: Information
FORMAT: "Epid Resolve failed; display updates will be retried Detected by module = %s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "ACTIVE CLK TASK CAN NOT RESOLVE VSISLAVE EPID, TRAPS NOT SENT"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-3-IPC_MSG_DATA_NU

SEVERITY: Minor Alert
FORMAT: "CLK IPC MSG DATA NULL Detected by module = %s "
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Incoming IPC Message is Null, Clock Functionality may be affected"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-3-TASK_STATE

SEVERITY: Minor Alert
FORMAT: "CLK TASK STATE NOT CORRECT FOR MESSAGE RECEIVED Detected by module = %s "
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Clock Manager Task is in Incorrect State For received Message"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-3-MSG_NULL

SEVERITY: Minor Alert
FORMAT: "CLOCK MESSAGE IS NULL Detected by module = %s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "CLOCK CONFIGURATION MESSAGE IS NULL"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-3-CLKSOURCES_INCO

SEVERITY: Minor Alert
FORMAT: "NUMBER OF CLOCK SOURCES IN MESSAGE IS INCORRECT Detected by module = %s , numberOfClockSources = %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "CLOCK CONFIGURATION MESSAGE HAS INCORRECT NO OF CLK SOURCES"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-3-MALLOC_FAIL

SEVERITY: Minor Alert
FORMAT: "CLK TASK module = %s, failed to allocate memory"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "CLK TASK Malloc Fail , Clock Functionality may be affected"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-2-DBINDX_FAIL

SEVERITY: Major Alert
FORMAT: "CLK TASK module = %s, Indexing into DB failed for indx=%d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Invalid Error Index "
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-7-SLOT_MISMATCH

SEVERITY: Information
FORMAT: "CLK TASK Incorrect Slot Number %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Mismatch in slot numbers during CTC events."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CLK_-2-TIMER_CREATE_FA

SEVERITY: Major Alert
FORMAT: "CLK TASK TIMER CREATE FAILEDin func %s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Clock Manager Timer Can not be Created. NwClkMgr Task deleted"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-2-TIMER_SCHEDULE_

SEVERITY: Major Alert
FORMAT: "Attempt to schedule %s timer failed. Reason %s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Clock Manager Timer could not be scheduled."
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-2-TIMER_CANCEL_FA

SEVERITY: Major Alert
FORMAT: "Attempt to cancel %s timer failed. Reason %s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Clock Manager Timer could not be cancelled."
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-7-GEN_INFO

SEVERITY: Information
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "An event worth attention occured."
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.
CLK_-4-GEN_ERROR
SEVERITY: Error
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "A General error was encountered in clocking module."
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-7-QUALIFY_CLOCK

SEVERITY: Information
FORMAT: "System is trying to determine if %s clock is lockable."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Clocking hardware is qualifying specified priority."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CLK_-7-SWITCH_CLOCK

SEVERITY: Information
FORMAT: "System is trying to switch to %s clock."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Clocking hardware is being locked to specified priority."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CLK_-7-SWITCH_CLOCK_DO

SEVERITY: Information
FORMAT: "System has locked to %s clock."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Clocking hardware has locked to specified priority."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CLK_-7-QUALIFY_CLOCK_D

SEVERITY: Information
FORMAT: "%s clock is lockable."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Clocking hardware has qualilfied specified priority clock as lockable."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CLK_-7-CLOCK_LOA

SEVERITY: Information
FORMAT: "Loss of Activity detected for %s Clock source "
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Clocking hardware has detected loss of activity for the specified priority. "
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CLK_-7-CLOCK_LOA_CLEAR

SEVERITY: Information
FORMAT: "Signal Activity detected for %s Clock source "
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Clocking hardware has detected Signal activity for the specified priority."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CLK_-7-CLOCK_UNLOCKABL

SEVERITY: Information
FORMAT: "%s Clock source is unlockable."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Clock source of the specified priority is unlockable "
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CLK_-7-PHASE_ERROR

SEVERITY: Information
FORMAT: "Clock is getting phase errors priority %d, count %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Clocking hardware is getting phase errors from specified priority."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CLK_-4-LOCK_TO_NULL_AT

SEVERITY: Error
FORMAT: "Attempting to lock %s clk when it is non-existent"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Hardware is trying to latch to a non-existent clk source"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-4-PROCESS_STBYUPD

SEVERITY: Error
FORMAT: "CLK TASK PROCESS STBYUPDT FAILED Detected by module = %s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Clock Source Information could not be updated on Standby Control Card"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-4-PROCESS_UIREQS_

SEVERITY: Error
FORMAT: "CLK TASK PROCESS UI REQS FAILED Detected by module = %s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Clock Source Information could not be displayed"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-4-PROCESS_SHM_MSG

SEVERITY: Error
FORMAT: "UI Back card messages from shm to Clock Manager Failed Detected by module = %s, Line = %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Back card insertion or removal message could not be delivered to the Clock Manager"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-2-STBY_INSERTED_M

SEVERITY: Major Alert
FORMAT: "Insertion Message from Standby Clock Task to the Active Clock task were not processed correctly Detected by module = %s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Clock redundancy may be affected"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-4-STBY_EVENT_MSG_

SEVERITY: Error
FORMAT: "Messages about events affecting clock on the standby card were not processed correctly Detected by module = %s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Clock redundancy may be affected"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-4-SET_FAILED

SEVERITY: Error
FORMAT: "Clock Set (Configure) request Failed in %s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Clock configure request failed in the specified function"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-4-DELETE_FAILED

SEVERITY: Error
FORMAT: "Clock Delete request Failed in %s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Clock Delete request failed in the specified function"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd, dspver, dsperr, dspclkalms before calling the Cisco Techincal support representative.

CLK_-7-CLK_SOURCE_DELE

SEVERITY: Information
FORMAT: "%s Clock Source deleted due to user request"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Clock Source deleted due to user request."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

DDTS "ccma"

CCMA-4-NOIPCBUF

SEVERITY: Error
FORMAT: "%s, line %d Failed to allocate Ipc Buffer when %s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Internal software error."
RECOMMENDED ACTION: "Please collect the following info and contact TAC."
REQUIRED INFO: "- On PXM45
1. dspver
2. dspdate
3. dsplog -sl <slot that experienced this err>
4. dspcd <slot that experienced err>
5. dsperr <slot that experienced err>

CCMA-4-IPCSENDFAIL

SEVERITY: Error
FORMAT: "%s, line %d Ipc send fail in %s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Internal software error."
RECOMMENDED ACTION: "Please collect the following info and contact TAC."
REQUIRED INFO: "- On PXM45
1. dspver
2. dspdate
3. dsplog -sl <slot that experienced this err>
4. dspcd <slot that experienced err>
5. dsperr <slot that experienced err>

CCMA-4-CREATEEPFAIL

SEVERITY: Error
FORMAT: "%s, line %d Failed to create communication endpoint for %s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Internal software error - create communication endpoint failed."
RECOMMENDED ACTION: "Please collect the following info and contact TAC."
REQUIRED INFO: "- On PXM45
1. dspver
2. dspdate
3. dsplog -sl <slot that experienced this err>
4. dspcd <slot that experienced err>
5. dsperr <slot that experienced err>

CCMA-4-ATTACHEPFAIL

SEVERITY: Error
FORMAT: "%s, line %d Failed to attach message handler to communication endpoint for %s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Internal software error - failed to attach message handler to communication endpoint."
RECOMMENDED ACTION: "Please collect the following info and contact TAC."
REQUIRED INFO: "- On PXM45
1. dspver
2. dspdate
3. dsplog -sl <slot that experienced this err>
4. dspcd <slot that experienced err>
5. dsperr <slot that experienced err>

CCMA-4-CREATETASKFAIL

SEVERITY: Error
FORMAT: "%s, line %d Failed to Create %s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Software error create task failed."
RECOMMENDED ACTION: "Please collect the following info and contact TAC."
REQUIRED INFO: "- On PXM45
1. dspver
2. dspdate
3. dsplog -sl <slot that experienced this err>
4. dspcd <slot that experienced err>
5. dsperr <slot that experienced err>

CCMA-7-CTCEVENTMISMATC

SEVERITY: Information
FORMAT: "%s, line %d Ctc event & cm root task state mismatch ctc event - %x, state - %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "This event is never used. Please ignore."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

DDTS "control-point"

CNTP-7-MSGSUBS

SEVERITY: Information
FORMAT: "cntpMsgBufTake() ssiFrameBufferAlloc failed %d times."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Attempt to allocate a buffer using ssiFrameBufferAlloc from the control point subsystem failed the specified number of times."
RECOMMENDED ACTION: No action required
REQUIRED INFO: No Required Info

DDTS "drivers"

COME-4-COMET_ERR

SEVERITY: Error
FORMAT: "COMET Err %s() line %d Event Code %X, Event Info %X"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "COMET software module generates event info code"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd (for PXM and for the slot the error is found), dspver, dsperr, ls C:/FW before calling the Cisco Techincal support representative.

COME-4-COMET_ERR_STR

SEVERITY: Error
FORMAT: "COMET Err %s() line %d Event Code %X, Info String %s"
FLAG: No Flag
THROTTLING: No Throttling
EXPLANATION: "COMET software module generates event info string"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd (for PXM and for the slot the error is found), dspver, dsperr, ls C:/FW before calling the Cisco Techincal support representative.

DDTS "spvc"

CONP-5-WARNING

SEVERITY: Warning
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: No Explanation
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CONP-7-INFO

SEVERITY: Information
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: No Explanation
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CONP-7-DINFO

SEVERITY: Information
FORMAT: "DEBUG%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: No Explanation
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CONP-4-ERROR

SEVERITY: Error
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Error in Connection Provisioning and alarm handling. This is valid on BPX+SES product only."
RECOMMENDED ACTION: Issue these comamnds on the shell prompt
a) dspver
b) dsplogs
c) dsperrs
d) dsppnports
e) dspcons
f) dspcon
REQUIRED INFO: Collect output of these CLIs
a) dspver b) dsplogs c) dspvers d) dsppnports e) dspcons
f) dspcon for connection in problem

CONP-5-WARNING

SEVERITY: Warning
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: No Explanation
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CONP-7-INFO

SEVERITY: Information
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: No Explanation
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CONP-7-DINFO

SEVERITY: Information
FORMAT: "DEBUG%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: No Explanation
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CONP-4-ERROR

SEVERITY: Error
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Error in Connection Provisioning task state/role transition"
RECOMMENDED ACTION: Issue these comamnds on the shell prompt
a) dspver
b) dsplogs
c) dsperrs
d) dsppnports
e) dspcons
f) dspcon
REQUIRED INFO: Collect output of these CLIs
a) dspver b) dsplogs c) dspvers d) dsppnports e) dspcons
f) dspcon for connection in problem

CONP-5-WARNING

SEVERITY: Warning
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: No Explanation
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CONP-7-INFO

SEVERITY: Information
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: No Explanation
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CONP-7-DINFO

SEVERITY: Information
FORMAT: "DEBUG%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: No Explanation
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CONP-4-ERROR

SEVERITY: Error
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Error in Connection Provisioning and SPVC Module interface"
RECOMMENDED ACTION: Issue these comamnds on the shell prompt
a) dspver
b) dsplogs
c) dsperrs
d) dsppnports
e) dspcons
f) dspcon
REQUIRED INFO: Collect output of these CLIs
a) dspver b) dsplogs c) dspvers d) dsppnports e) dspcons
f) dspcon for connection in problem

DDTS "spvc"

CONP-4-CPI_MSG_DANGLIN

SEVERITY: Error
FORMAT: "%s Previous cpi msg has not been cleared"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Previous cpi msg should have been cleared"
RECOMMENDED ACTION: Issue these comamnds on the shell prompt
a) dspver
b) dsplogs
c) dsperrs
d) dsppnports
e) dspcons
f) dspcon
REQUIRED INFO: Collect output of these CLIs
a) dspver b) dsplogs c) dspvers d) dsppnports e) dspcons
f) dspcon for connection in problem

CONP-4-NOT_SES

SEVERITY: Error
FORMAT: "%s Should only work for SES"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "This command/code only used for SES"
RECOMMENDED ACTION: Issue these comamnds on the shell prompt
a) dspver
b) dsplogs
c) dsperrs
d) dsppnports
e) dspcons
f) dspcon
REQUIRED INFO: Collect output of these CLIs
a) dspver b) dsplogs c) dspvers d) dsppnports e) dspcons
f) dspcon for connection in problem

DDTS "drivers"

ATMI-5-ATMIZER_SARERR

SEVERITY: Warning
FORMAT: "ATMIZER_SAR Error %s() line %d %X,%X"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: No Explanation
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

DDTS "cpro"

CPRO-7-GEN_INFO

SEVERITY: Information
FORMAT: " %s; %d, errno=%d\n"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: " general cpro health related info"
RECOMMENDED ACTION: "This is an Info"
REQUIRED INFO: No Required Info

CPRO-4-TRANSACTION_ERR

SEVERITY: Error
FORMAT: "connection Transaction err : %s; errno=%d\n"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "error happened when getting/incrementing transaction id."
RECOMMENDED ACTION: "Please collect the following info and contact TAC"
REQUIRED INFO: "From PXM45 :
1) dspdate
2) dsplog for this slot
3) dspver
FROM SM :
1) dspcons
2) from the axsm shell cProTransactionHelp "

CPRO-7-DEL_REQ_NAK_BY_

SEVERITY: Information
FORMAT: "%s; conn = %d.%d.%d; err = %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "PNNI Controller NAKs the DELETE request"
RECOMMENDED ACTION: "This is an info log"
REQUIRED INFO: No Required Info

CPRO-7-VSIS_FIND_RECOR

SEVERITY: Information
FORMAT: "Could not find record(%d) for %d.%d.%d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "VSI-S NAKs the request as connection does not exist in the CPRO databased"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CPRO-7-CONNCAPEXCEED

SEVERITY: Information
FORMAT: "Connection capacity of card reached"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Software limit for the provisioned connection capacity has been reached. Cannot provision any more connections."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CPRO-5-NONEXISTCONN

SEVERITY: Warning
FORMAT: "Connection %d.%d.%d does not exist"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Connection does not exist while an internal operation took place. This can happen under some circumstances. This event logs is reqd to keep track of those circumstances."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CPRO-4-PASSTHROREGFAIL

SEVERITY: Error
FORMAT: "Could not register for passthrough"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "All provisioning requests for connections are bound to fail. Possible indication of VSI layer failure. Rootcause of failure can be many including internal memory leakages, IPC buffer leakages."
RECOMMENDED ACTION: "Please collect the following information for further analysis and call TAC support; This may require a reboot or switchover of the SM. Before doing so, TAC may need to collect relevant information."
REQUIRED INFO: a) dspcds on PXM
b) dspred on PXM
c) dspcd <slot> on PXM
d) dspcd on the affected slot
e) dsprevs on PXM
f) All event logs prior to event (dsplog)
g) All error logs prior to event (dsperr)
h) Coredump if the card had reset
CPRO-3-DOWNLOADFAIL
SEVERITY: Minor Alert
FORMAT: "Error downloading from disk"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Could not download connection configuration from disk. The problem could span across several entities in AXSM/PXM. The problems could range from memory/IPC buffer leakages to runaway/suspended task on either card."
RECOMMENDED ACTION: "There may not be a need for any corrective action as the card would be reset. However, please collect the following information for further analysis and call TAC"
REQUIRED INFO: a) dspcds on PXM
b) dspred on PXM
c) dspcd <slot> on PXM
d) dspcd on the affected slot
e) dsprevs on PXM
f) All event logs prior to event (dsplog)
g) All error logs prior to event (dsperr)
h) Coredump if the card had reset

CPRO-7-SYNCRAMERR

SEVERITY: Information
FORMAT: "Sync Ram Error at line %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Internal Error. Could occur under normal circumstances. Typical scenario includes reset of standby AXSM while bulk/incremental sync is in progress"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CPRO-4-DBMINITFAIL

SEVERITY: Error
FORMAT: "Error registering with DB manager"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "DB server did not accept registration from AXSM. The problem could span across several entities in AXSM/PXM. The problems could range from memory/IPC buffer leakages to runaway/suspended task on either card."
RECOMMENDED ACTION: "There may not be a need for any corrective action as the card would be reset. However, please collect the following information for further analysis and call TAC"
REQUIRED INFO: a) dspcds on PXM
b) dspred on PXM
c) dspcd <slot> on PXM
d) dspcd on the affected slot
e) dsprevs on PXM
f) All event logs prior to event (dsplog)
g) All error logs prior to event (dsperr)
h) Coredump if the card had reset

CPRO-4-CPROTIMERFAIL

SEVERITY: Error
FORMAT: "Could not start cPro timer"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "Internal error with card infrastructure. Will impact connection alarm integration and reporting activity."
RECOMMENDED ACTION: "In all probability, the card would reset. Regardless of this, please collect the following information for further analysis and call TAC"
REQUIRED INFO: a) dspcds on PXM
b) dspred on PXM
c) dspcd <slot> on PXM
d) dspcd on the affected slot
e) dsprevs on PXM
f) All event logs prior to event (dsplog)
g) All error logs prior to event (dsperr)
h) Coredump if the card had reset

CPRO-4-CPROMSGHDLRFAIL

SEVERITY: Error
FORMAT: "Error attaching cPro msg handler; errno = %x"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "Internal error with card infrastructure. The card would eventually reset."
RECOMMENDED ACTION: "There may not be a need for any corrective action as the card would be reset. However, please collect the following information for further analysis and call TAC"
REQUIRED INFO: a) dspcds on PXM
b) dspred on PXM
c) dspcd <slot> on PXM
d) dspcd on the affected slot
e) dsprevs on PXM
f) All event logs prior to event (dsplog)
g) All error logs prior to event (dsperr)
h) Coredump if the card had reset

CPRO-4-COMEPCREATEFAIL

SEVERITY: Error
FORMAT: "Error creating EpId"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Internal error with card infrastructure. The card would eventually reset."
RECOMMENDED ACTION: "There may not be a need for any corrective action as the card would be reset. However, please collect the following information for further analysis and call TAC"
REQUIRED INFO: a) dspcds on PXM
b) dspred on PXM
c) dspcd <slot> on PXM
d) dspcd on the affected slot
e) dsprevs on PXM
f) All event logs prior to event (dsplog)
g) All error logs prior to event (dsperr)
h) Coredump if the card had reset

CPRO-4-INVALID_CNTRLR_

SEVERITY: Error
FORMAT: "Error in retrieving controller information"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Error in retrieving controller information from shelf management database. May affect all connection provisioning activity on the card."
RECOMMENDED ACTION: "Please collect the following information for further analysis and call TAC support; This may require a reboot or switchover of the SM/PXM. Before doing so, TAC may need to collect relevant information."
REQUIRED INFO: a) dspcds on PXM
b) dspred on PXM
c) dspcd <slot> on PXM
d) dspcd on the affected slot
e) dsprevs on PXM
f) All event logs prior to event (dsplog)
g) All error logs prior to event (dsperr)
h) Coredump if the card had reset

CPRO-4-SYNCRAMINITFAIL

SEVERITY: Error
FORMAT: "line %d Ram Sync %s error - errno = 0x%x"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Internal error with card infrastructure. The card would eventually reset."
RECOMMENDED ACTION: "There may not be a need for any corrective action as the card would be reset. However, please collect the following information for further analysis and call TAC"
REQUIRED INFO: a) dspcds on PXM
b) dspred on PXM
c) dspcd <slot> on PXM
d) dspcd on the affected slot
e) dsprevs on PXM
f) All event logs prior to event (dsplog)
g) All error logs prior to event (dsperr)
h) Coredump if the card had reset

CPRO-4-ALRM_REG_FAIL

SEVERITY: Error
FORMAT: "Error registering with Card alarm manager"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Error registering with Card alarm manager. Alarm reporting for conns is disabled."
RECOMMENDED ACTION: "Please collect following information before contacting TAC"
REQUIRED INFO: a) dspcds on PXM
b) dspred on PXM
c) dspcd <slot> on PXM
d) dspcd on the affected slot
e) dsprevs on PXM
f) All event logs prior to event (dsplog)
g) All error logs prior to event (dsperr)
h) Coredump if the card had reset

CPRO-3-MISMATCH_CONN

SEVERITY: Minor Alert
FORMAT: "Mismatch on connection %d.%d.%d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Mismatch between SPVC manager and AXSM databases for this connection. This could happen because of PXM45/AXSM switchover while provisioning or possible database update failures at either end."
RECOMMENDED ACTION: "Check if the connection is still in this condition, using the dspcons command on AXSM. If it is not, then this is a possible transient condition and can be ignored. If condition does exist, then attempt to rectify the problem with following steps
a) If this is a master endpoint, attempt to
admin down and up the connection.
b) If this is a slave endpoint, then delete
and readd the whole connection. If either of them, does not help please collect the following info and inform TAC"
REQUIRED INFO: a) dspcds on PXM
b) dspred on PXM
c) dspcd <slot> on PXM
d) dspcd on the affected slot
e) dsprevs on PXM
f) All event logs prior to event (dsplog)
g) All error logs prior to event (dsperr)
h) Coredump if the card had reset

CPRO-7-RINGCONGESTION

SEVERITY: Information
FORMAT: "Ring Congested; Wr%d Rd%d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Ring Congested."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CPRO-7-RINGCONGABATE

SEVERITY: Information
FORMAT: "Ring Congestion Abate; Wr%d Rd%d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Ring Congestion Abate."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CPRO-6-UNKNOWN_MSGTYPE

SEVERITY: Notice
FORMAT: "Unknown message type %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Unknown message type "
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CPRO-3-FLUSHFAIL

SEVERITY: Minor Alert
FORMAT: "Error flushing semaphore; errno=%d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Internal error in card infrastructure. This may not result in a catastrophic failure, but it is probably indicative of a basic problem in the SSI."
RECOMMENDED ACTION: "User may need to switchover to a redundant card, if there is one. However, before doing so, it is advisable to collect the following information and involve TAC"
REQUIRED INFO: a) dspcds on PXM
b) dspred on PXM
c) dspcd <slot> on PXM
d) dspcd on the affected slot
e) dsprevs on PXM
f) All event logs prior to event (dsplog)
g) All error logs prior to event (dsperr)
h) Coredump if the card had reset

CPRO-3-AVLFAIL

SEVERITY: Minor Alert
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Internal error in AVL library functions. This may cause problems over a period of time."
RECOMMENDED ACTION: "User may need to switchover to a redundant card, if there is one. However, before doing so, it is advisable to collect the following information and involve TAC"
REQUIRED INFO: a) dspcds on PXM
b) dspred on PXM
c) dspcd <slot> on PXM
d) dspcd on the affected slot
e) dsprevs on PXM
f) All event logs prior to event (dsplog)
g) All error logs prior to event (dsperr)
h) Coredump if the card had reset

CPRO-3-CONNDB_ERR

SEVERITY: Minor Alert
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Internal connection database error. May result in problems over a period of time."
RECOMMENDED ACTION: "User may need to switchover to a redundant card, if there is one. However, before doing so, it is advisable to collect the following information and involve TAC"
REQUIRED INFO: a) dspcds on PXM
b) dspred on PXM
c) dspcd <slot> on PXM
d) dspcd on the affected slot
e) dsprevs on PXM
f) All event logs prior to event (dsplog)
g) All error logs prior to event (dsperr)
h) Coredump if the card had reset
y engineering."

CPRO-7-CANNOT_FIND_REC

SEVERITY: Information
FORMAT: "Could not find record for %d.%d.%d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "None"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CPRO-7-CPROTASK

SEVERITY: Information
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Invalid CTC transition prevented. Also to track CPRO TASK transitions(a normal event)"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CPRO-7-CHKSUM_MISMATCH

SEVERITY: Information
FORMAT: "Checksum mismatch in Record %d disk %d record %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Check mismatch between disk & RAM database detected during resync which occurs on a standby to active role transition. This is a normal event that was possibly caused by transient card events at the time when provisioning was done."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CPRO-5-NONEXISTOPSTATE

SEVERITY: Warning
FORMAT: "EM OpState invalid for ifNum %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Events introduced to guard against possible API failures. These failures usually result in basic loss of functionality and detected during the development testing or regression testing cycles."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CPRO-5-EMGETOPSTATEFAI

SEVERITY: Warning
FORMAT: "EM Get OpState fails for ifNum=%d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Events introduced to guard against possible API failures. These failures usually result in basic loss of functionality and detected during the development testing or regression testing cycles."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CPRO-5-NONEXISTADMSTAT

SEVERITY: Warning
FORMAT: "EM AdmState invalid for ifNum %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Events introduced to guard against possible API failures. These failures usually result in basic loss of functionality and detected during the development testing or regression testing cycles."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CPRO-5-EMGETADMSTATEFA

SEVERITY: Warning
FORMAT: "EM Get AdmState fails for ifNum %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Events introduced to guard against possible API failures. These failures usually result in basic loss of functionality and detected during the development testing or regression testing cycles."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CPRO-5-GETOPSTATEFAIL

SEVERITY: Warning
FORMAT: "cPro Get OpState fails for ifNum %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Events introduced to guard against possible API failures. These failures usually result in basic loss of functionality and detected during the development testing or regression testing cycles."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CPRO-5-GETADMSTATEFAIL

SEVERITY: Warning
FORMAT: "cPro Get AdmState fails for ifNum %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Events introduced to guard against possible API failures. These failures usually result in basic loss of functionality and detected during the development testing or regression testing cycles."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CPRO-4-ADDCHANLOOPFAIL

SEVERITY: Error
FORMAT: "cPro Addchanloop fails. ifNum=%d, vpi=%d, vci=%d, dir=%d."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Internal error while attempting to add chan loopback. This will not impact the regular functioning of the card. However, this needs to be analysed by engineering."
RECOMMENDED ACTION: "Please collect the following details and inform TAC"
REQUIRED INFO: a) dspcds on PXM
b) dspred on PXM
c) dspcd <slot> on PXM
d) dspcd on the affected slot
e) dsprevs on PXM
f) All event logs prior to event (dsplog)
g) All error logs prior to event (dsperr)
h) dspconinfo on PXM
h) dsppnports on PXM
i) dsplns on AXSM
h) dspports on AXSM
h) dspspvcifs on AXSM
h) dspcon on AXSM
ent logs and config data."

CPRO-7-DELCHANLOOPFAIL

SEVERITY: Information
FORMAT: "cPro Delchanloop fails. ifNum=%d, vpi=%d, vci=%d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Internal error while attempting to add chan loopback. This will not impact the regular functioning of the card. However, this needs to be analysed by engineering."
RECOMMENDED ACTION: "Please collect the following details and inform TAC"
REQUIRED INFO: a) dspcds on PXM
b) dspred on PXM
c) dspcd <slot> on PXM
d) dspcd on the affected slot
e) dsprevs on PXM
f) All event logs prior to event (dsplog)
g) All error logs prior to event (dsperr)
h) dspconinfo on PXM
h) dsppnports on PXM
i) dsplns on AXSM
h) dspports on AXSM
h) dspspvcifs on AXSM
h) dspcon on AXSM

CPRO-4-NULLRSPPTR

SEVERITY: Error
FORMAT: "Null response ptr is returned"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Internal IPC error in the card. This will not affect regular functioning of the card. However, this problem needs to be analysed by TAC/engineering "
RECOMMENDED ACTION: "Please collect the following details and inform TAC"
REQUIRED INFO: a) dspcds on PXM
b) dspred on PXM
c) dspcd <slot> on PXM
d) dspcd on the affected slot
e) dsprevs on PXM
f) All event logs prior to event (dsplog)
g) All error logs prior to event (dsperr)
h) dspconinfo on PXM
h) dsppnports on PXM
i) dsplns on AXSM
h) dspports on AXSM
h) dspspvcifs on AXSM
h) dspcon on AXSM

CPRO-4-IPCMSGALLOCFAIL

SEVERITY: Error
FORMAT: "IPC Message Allocation failed"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Internal IPC error in the card. This will not affect regular functioning of the card. However, this problem needs to be analysed by TAC/engineering "
RECOMMENDED ACTION: "Please collect the following details and inform TAC"
REQUIRED INFO: a) dspcds on PXM
b) dspred on PXM
c) dspcd <slot> on PXM
d) dspcd on the affected slot
e) dsprevs on PXM
f) All event logs prior to event (dsplog)
g) All error logs prior to event (dsperr)
h) dspconinfo on PXM
h) dsppnports on PXM
i) dsplns on AXSM
h) dspports on AXSM
h) dspspvcifs on AXSM
h) dspcon on AXSM

CPRO-7-IPCMSGSENDSYNCF

SEVERITY: Information
FORMAT: "IPC Message SendSync failed"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Internal IPC error in the card. This will not affect regular functioning of the card. However, this problem needs to be analysed by TAC/engineering "
RECOMMENDED ACTION: "Please collect the following details and inform TAC"
REQUIRED INFO: a) dspcds on PXM
b) dspred on PXM
c) dspcd <slot> on PXM
d) dspcd on the affected slot
e) dsprevs on PXM
f) All event logs prior to event (dsplog)
g) All error logs prior to event (dsperr)
h) dspconinfo on PXM
h) dsppnports on PXM
i) dsplns on AXSM
h) dspports on AXSM
h) dspspvcifs on AXSM
h) dspcon on AXSM

CPRO-7-RECFOUNDNOTLPBK

SEVERITY: Information
FORMAT: "Connection not in loopback. ifNum=%d, vpi=%d, vci=%d, dir=%d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "User is attempting to delete loopback on a connection which is not in loopback."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CPRO-7-DALDSPCONNLOOPE

SEVERITY: Information
FORMAT: "dalDspConnLoop(ifNum=%d) return ERROR."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "dalDspConnLoop() return ERROR."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CPRO-7-DSPCHANLOOPFAIL

SEVERITY: Information
FORMAT: "cPro Dspchanloop fails. ifNum=%d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "cPro Dspchanloop fails."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CPRO-7-SNMP_ERROR

SEVERITY: Information
FORMAT: "SNMP error; id = %d; err %s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "SNMP get/set operation fails."
RECOMMENDED ACTION: "This error is also displayed on CWM. So, there is no need to take any action on switch side."
REQUIRED INFO: No Required Info

CPRO-4-RAMDISK_ERR

SEVERITY: Error
FORMAT: "RamDisk error %s; errno=%d\n"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Alarm file RamDisk operation error."
RECOMMENDED ACTION: "Please collect the following info and contact TAC"
REQUIRED INFO: "From PXM45
1) dspdate
2) dsplog for this slot
3) dspver"

CPRO-7-HOT_STDBY

SEVERITY: Information
FORMAT: "dsphotstandby cmd %s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "error while executing dsphotstandby command."
RECOMMENDED ACTION: "This is an info message."
REQUIRED INFO: No Required Info

CPRO-4-PORT_NOT_ADDED

SEVERITY: Error
FORMAT: "Port has not been added for ifNum = %d; SNMP Operation = %d (GET=0/SET=1/TEST=2);"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Port absent error during a provisioning request"
RECOMMENDED ACTION: "This event is logged
a) when a conn Add/Modify/Delete request is requested for a conn
which doesn't have the associated port added,
b) because of a unknown software bug"
REQUIRED INFO: "From PXM card, collect
1) dsprevs,
2) dsplog for that slot,
3) dsperr for that slot,
4) dsppnports.
From AXSM card, collect
1) dspports,
2) dspcon for that connection,
3) dsplns."

CPRO-4-DISK_DB_UPDATE_

SEVERITY: Error
FORMAT: "Conn = (%d.%d.%d, rec# %d); ... Operation = %d; Error = %d;"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Disk DB update on PXM Hard Disk failed"
RECOMMENDED ACTION: "This event is logged when a disk DB update on PXM hard-disk fails. Since Disk is considered to be a Golden copy, this is a severe prob. Check the connection parameters that are also displayed as part of log ... Conn -> ifNum, vpi, vci, rec#; operation -> Add/Modify/Delete"
REQUIRED INFO: "From PXM card, collect
1) dsprevs,
2) dsplog for that slot,
3) dsperr for that slot,
4) dsppnports
From AXSM card, collect
1) dspports,
2) dspcon for that connection,
3) dsplns"

CPRO-4-CONTROLLER_UPDA

SEVERITY: Error
FORMAT: "Conn = (%d.%d.%d, rec# %d); ... Operation = %d; Error = %d;"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "PNNI Controller update on PXM failed"
RECOMMENDED ACTION: "This event is logged when PNNI Controller update on PXM fails. Check the connection parameters that are displayed as part of log ... Conn -> ifNum, vpi, vci, rec#; operation -> Add/Mod/Del PNNI & AXSM dbs will be out-of-sync after this ... PNNI re-sync will take care of this problem"
REQUIRED INFO: "From PXM card, collect
1) dsprevs,
2) dsplog for that slot,
3) dsperr for that slot,
4) dsppnports.
From AXSM card, collect
1) dspports,
2) dspcon for that connection,
3) dsplns."

CPRO-4-GET_LCN_FAILED

SEVERITY: Error
FORMAT: "cProGetLCN API failed for Conn -> (%d.%d.%d)"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "cProGetLCN API failed"
RECOMMENDED ACTION: ""
REQUIRED INFO: "From PXM card, collect
1) dsprevs,
2) dsplog for that slot,
3) dsperr for that slot,
From AXSM card, collect
1) dspports,
2) dspcon for that connection,
3) dsplns."

DDTS "infra"

CRDM-2-FATAL_ERROR

SEVERITY: Major Alert
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Fatal Error in Core Dump Master Task"
RECOMMENDED ACTION: "switchcc if Standby PXM is ready, else Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information."
REQUIRED INFO: Enter the CLI commands dspcds, dspcd (for PXM and for the slot the error is found), dspver, dsperr, ls C:/FW before calling the Cisco Techincal support representative.

CRDM-3-MAJOR_ERROR

SEVERITY: Minor Alert
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Major Error in Core Dump Master Task"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd (for PXM and for the slot the error is found), dspver, dsperr, ls C:/FW before calling the Cisco Techincal support representative.

CRDM-4-ERROR

SEVERITY: Error
FORMAT: "%s"
FLAG: Stack Trace
THROTTLING: One Tick
EXPLANATION: "Minor Error in Core Dump Master Task"
RECOMMENDED ACTION: Copy the error message exactly as it appears in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
REQUIRED INFO: Enter the CLI commands dspcds, dspcd (for PXM and for the slot the error is found), dspver, dsperr, ls C:/FW before calling the Cisco Techincal support representative.

CRDM-5-WARNING

SEVERITY: Warning
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Warning from Core Dump Master Task"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CRDM-7-INFO

SEVERITY: Information
FORMAT: "%s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Info msg from Core Dump Master Task"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

DDTS "pxm-connmgm"

CSMI-5-CSMIERR

SEVERITY: Warning
FORMAT: "CSMI Error %s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Event is not use at the moment. Developer, please include your comment when you are using this event."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSMI-5-CSMIERRCODE

SEVERITY: Warning
FORMAT: "CSMI Error Module %s Function %d Code %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Event is not use at the moment. Developer, please include your comment when you are using this event."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSMI-5-INVALIDDISKUPDA

SEVERITY: Warning
FORMAT: "Got an invalid diskupdate in function %s line %d msgType %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Got an invalid diskupdate from the service module"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSMI-5-INVALIDDBREC

SEVERITY: Warning
FORMAT: "Got an invalid connection record while rebuilding from disk for slot %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Got an invalid diskupdate while rebuilding from disk"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSMI-5-PSLOTINFOERR

SEVERITY: Warning
FORMAT: "Unable to get the physical slot info for slot %d , line no %d rc %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Got an error while trying to retrieve the physical slot information"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSMI-5-UNKNOWNCDTYPE

SEVERITY: Warning
FORMAT: "Card in slot %d is unknown/unsupported, line no %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Got a disk update for an unknown/unsupported card"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSMI-5-PIPCSENDERR

SEVERITY: Warning
FORMAT: "pipc Send error in line %d, rc %d errno %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Got an error while trying to send pipc message"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSMI-5-MEMALLOCERR

SEVERITY: Warning
FORMAT: "Mem alloc error in fn %s, line %d errno %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Got an error while trying to allocate memory"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSMI-4-INVALIDSLOT

SEVERITY: Error
FORMAT: "Slot %d is either unreserved or reserved for unsupported card type, line %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "Configuration exists for a card which is not reserved or reserved for unsupported card type"
RECOMMENDED ACTION: Indicates an internal error detected by the PXM connection management module. It needs to be analyzed by TAC and possibly by the development team.
REQUIRED INFO: Please capture the following information from the PXM45 cli and call your TAC support
1) dspcds/dspcd
2) dspver
3) dsplog -sl <slot which is experiencing the problem>
4) dsplog -sl < redundant slot if configured>
5) dsperr for the above slots.
6) Save the core file if required
n

DDTS "config save restore"

CSR-5-CSRERR001

SEVERITY: Warning
FORMAT: "CSRERR001 CSR called cleandir() with NULL input"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "CSR did not pass the name of the directory to be cleaned to the routine."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR002

SEVERITY: Warning
FORMAT: "CSRERR002 CSR called cleandir() with invalid input"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "CSR passed invalid name of the directory to be cleaned to the routine."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-CSRERR003

SEVERITY: Information
FORMAT: "CSRERR003 CSR cleandir() could not remove file \"%s\", errno %X."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "CSR cleandir() could not remove file."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-CSRERR004

SEVERITY: Information
FORMAT: "CSRERR004 CSR failed to call cfgupload function to create CSR filename while cleaning C:/TMP/ "
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "CSR received an ERROR from the cfgupload function to create the CSR filename. This call was to enable the clean up of C:/TMP/ directory of the CSR files."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-CSRERR005

SEVERITY: Information
FORMAT: "CSRERR005 CSR cleanTMPdir() could not remove file \"%s\", errno %X."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "CSR cleanTMPdir() could not remove file."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR006

SEVERITY: Warning
FORMAT: "CSRERR006 CSR could not extract the name from the path() due to NULL input path"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "CSR did not pass the path name while attempting to extract the name from the path"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR007

SEVERITY: Warning
FORMAT: "CSRERR007 CSR could not extract the name from the path() due to NULL input pointer for target output"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "CSR could not extract the name from the path() due to NULL input pointer for target output (parameter1 in the function"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR008

SEVERITY: Warning
FORMAT: "CSRERR008 CSR could not extract the name from the path() as it could not locate the last but one occurrence of '/' due to either invalid input or vxworks error "
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "CSR could not extract the name from the path() as it could not locate the last but one occurrence of '/' possibly due to invalid input or a vxworks error call to strrchr"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-CSRERR010

SEVERITY: Information
FORMAT: "CSRERR010 While performing a save of a file Function to extract name from path returned an error "
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "csrSaveCopyFileToOtherDest()Function to extract name from path returned a ERROR"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-CSRERR011

SEVERITY: Information
FORMAT: "CSRERR011 While performing a save of a file Function to update text file with zipfile \"%s\", and destn dir \"%s\",returned ERROR."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "csrSaveCopyFileToOtherDest received ERROR from csrSaveCopyToTxt"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-CSRERR012

SEVERITY: Information
FORMAT: "CSRERR012 While performing a save of a file Function to copy file \"%s\", to file\"%s\",returned ERROR."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "csrSaveCopyFileToOtherDest received ERROR from myCopyZipFIle"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR013

SEVERITY: Warning
FORMAT: "CSRERR013 In function to zip files exploring depth 1, source directory to be zipped is necessary input"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "csrSaveZipDirDepth1 source directory needs to be specified."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-CSRERR014

SEVERITY: Information
FORMAT: "CSRERR014 In function to zip dir to depth 1 Function to zip each sub dir returned ERROR."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "csrSaveZipDirDepth1 received ERROR from saveDir"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR015

SEVERITY: Warning
FORMAT: "CSRERR015 In function to zip files exploring depth 0, source directory to be zipped is necessary input"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "csrSaveZipDirDepth0 source directory needs to be specified."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-CSRERR016

SEVERITY: Information
FORMAT: "CSRERR016 In function to zip files exploring depth 0 Function to extract name from path returned an error "
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "csrSaveZipDirDepth0()Function to extract name from path returned a ERROR"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-CSRERR017

SEVERITY: Information
FORMAT: "CSRERR017 In function to zip files exploring depth 0 Function to update text with file \"%s\", and dir \"%s\",returned ERROR."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "csrSaveZipDirDepth0 received ERROR from csrSaveToExtractName"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-CSRERR018

SEVERITY: Information
FORMAT: "CSRERR018 In function to zip files exploring depth 0 Function to zip directory \"%s\", to file\"%s\",returned ERROR."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "csrSaveZipDirDepth0 received ERROR from zipMain"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-CSRERR019

SEVERITY: Information
FORMAT: "CSRERR019 In function to zip RPM files Call to zip directory to depth 0 returned ERROR"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "csrSaveZipDirRPM received ERROR from csrSaveZipDirDepth0"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR020

SEVERITY: Warning
FORMAT: "CSRERR020 In function to copy to txt error in opening zip file in C:/CNF/TMP/"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "csrSaveCopyToTxt error opening text file in C:/CNF/TMP/"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR021

SEVERITY: Warning
FORMAT: "CSRERR021 In function to copy to txt error in closing zip file in C:/CNF/TMP/"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "csrSaveCopyToTxt error closing text file in C:/CNF/TMP/"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR022

SEVERITY: Warning
FORMAT: "CSRERR022 While checking if directory tree is empty, stat of file \"%s\"failed, errno %X"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "isEmptySubTree stat of file error"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR024

SEVERITY: Warning
FORMAT: "CSRERR024 Cannot open file \"%s\" for bram image."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "createBramImage error opening file to store BRAM image"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR025

SEVERITY: Warning
FORMAT: "CSRERR025 Cannot allocate memory for buf used to write BRAM image in file."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "createBramImage error allocating memory for buf"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-CSRERR026

SEVERITY: Information
FORMAT: "CSRERR026 Call to function to get sys BRAM returned ERROR."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "createBramImage error returned by sysBRAMGet()"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR027

SEVERITY: Warning
FORMAT: "CSRERR027 Error writing BRAM image to file \"%s\"."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "createBramImage error on fwrite"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR028

SEVERITY: Warning
FORMAT: "CSRERR028 Error opening directory \"%s\"."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "clearCnfDir error opening directory"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR029

SEVERITY: Warning
FORMAT: "CSRERR029 Error opening file \"%s\" to read while copying zip files "
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "myCopyZipFile error opening file in read mode"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR030

SEVERITY: Warning
FORMAT: "CSRERR030 Error opening file \"%s\" to write while copying zip files "
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "myCopyZipFile error opening file in write mode"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR031

SEVERITY: Warning
FORMAT: "CSRERR031 Line=%d Cannot allocate memory for buf used to copy zip files."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "myCopyZipFile error allocating memory for buf"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR032

SEVERITY: Warning
FORMAT: "CSRERR032 Error reading file \"%s\" while copying zip files "
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "myCopyZipFile error reading file "
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR033

SEVERITY: Warning
FORMAT: "CSRERR033 Error writing file \"%s\" while copying zip files "
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "myCopyZipFile error writing file "
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR034

SEVERITY: Warning
FORMAT: "CSRERR034 No source directory provided while trying to zip individual sub-dirs while zipping source directory to depth1"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "saveDirCannot resolve with source directory passed to function as NULL"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR035

SEVERITY: Warning
FORMAT: "CSRERR035 Error opening directory \"%s\" while trying to zip individual sub-dirs while zipping soiurce to depth 1 "
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "saveDir error opening source directory to zip individual sub-dirs"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR036

SEVERITY: Warning
FORMAT: "CSRERR036 Function to copy to text file zipfile \"%s\", and destn dir\"%s\",returned ERROR while attempting to zip individual sub-dirs to depth1."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "saveDir received ERROR from csrSaveCopyToTxt"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR037

SEVERITY: Warning
FORMAT: "CSRERR037 Funtion to zip directory \"%s\", to file\"%s\",returned ERROR while attempting to zip individual sub-dirs to depth1."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "saveDir received ERROR from zipMain"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR040

SEVERITY: Warning
FORMAT: "CSRERR040 Cannot create \"%s\" , directory"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "saveFile received error while creating directory"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR041

SEVERITY: Warning
FORMAT: "CSRERR041 Cannot create \"%s\" , directory"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "saveFile received error while creating directory"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR042

SEVERITY: Warning
FORMAT: "CSRERR042 Cleaning dir \"%s\" , returned ERROR"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "saveFile received error while cleaning directory using csrSaveCleanDir"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR043

SEVERITY: Warning
FORMAT: "CSRERR043 Cleaning dir C:/TMP/ returned ERROR"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "saveFile received error while cleaning directory using csrSaveCleanSaveFilesFromTMPDir"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR044

SEVERITY: Warning
FORMAT: "CSRERR044 Cannot create file \"%s\" for bram image.Error received from function to create BRAM image."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "saveFile error received from createBRAMImageBRAM image"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-CSRERR045

SEVERITY: Information
FORMAT: "CSRERR045 Function to copy to text file VERSION \"%s\",returned ERROR."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "saveFile received ERROR from csrSaveCopyToTxt while writing version info"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-CSRERR046

SEVERITY: Information
FORMAT: "CSRERR046 Function call to perform the save for the source returned ERROR"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "saveFile received ERROR from the function call to save the dir/file"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR047

SEVERITY: Warning
FORMAT: "CSRERR047 ERROR allocating memory to tempZipFile"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "saveFile could not allocate memory for tempZipFile"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR048

SEVERITY: Warning
FORMAT: "CSRERR048 ERROR allocating memory to newZipFileName"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "saveFile could not allocate memory for newZipFileName"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR049

SEVERITY: Warning
FORMAT: "CSRERR049 Function to zipdirectory \"%s\", to file\"%s\",returned ERROR."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "saveFile received ERROR from zipMain"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR050

SEVERITY: Warning
FORMAT: "CSRERR050 VxWorks function to rename file \"%s\", to file\"%s\",returned ERROR."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "saveFile received ERROR from vxworks rename"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-CSRERR051

SEVERITY: Information
FORMAT: "CSRERR051 Function to clear directory \"%s\",returned ERROR."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "saveFile received ERROR from clearCnfDir"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-CSRERR052

SEVERITY: Information
FORMAT: "CSRERR052 Function to clear directory \"%s\",returned ERROR."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "saveFile received ERROR from csrSaveCleanDir"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-CSRERR053

SEVERITY: Information
FORMAT: "CSRERR053 Function to clear directory C:/TMP/ returned ERROR."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "saveFile received ERROR from csrSaveCleanSaveFilesFromTmpDir"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-CSRERR054

SEVERITY: Information
FORMAT: "CSRERR054 Function to clear directory \"%s\" ,returned ERROR."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "saveFile received ERROR from csrSaveCleanDir"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR055

SEVERITY: Warning
FORMAT: "CSRERR055 While verifying BRAM version Error opening file \"%s\" ,using vxworks fopen"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "verifyVersion received ERROR from fopen"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR056

SEVERITY: Warning
FORMAT: "CSRERR056 Error opening file \"%s\" ,while creating restore file"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "createRSFile received ERROR from fopen"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR057

SEVERITY: Warning
FORMAT: "CSRERR057 Error writing file \"%s\" ,while creating restore file"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "createRSFile received ERROR from fwrite"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR059

SEVERITY: Warning
FORMAT: "CSRERR059 Could not remove file \"%s\", errno %X."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "CSR cliRestore() could not remove file."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-CSRERR060

SEVERITY: Information
FORMAT: "CSRERR060 Function to unzip file \"%s\", to directory \"%s\",returned ERROR."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "cliRestore received ERROR from unzipMain"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-CSRERR061

SEVERITY: Information
FORMAT: "CSRERR061 Function verifying BRAM version returned Error"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "cliRestore received ERROR from verifyVersion"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-CSRERR062

SEVERITY: Information
FORMAT: "CSRERR062 Function verifying BRAM version returned Error on second try"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "cliRestore received ERROR from verifyVersion on second try."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR063

SEVERITY: Warning
FORMAT: "CSRERR063 Function to create restore file returned error"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "cliRestore received ERROR creating restore file in createRSFile."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR064

SEVERITY: Warning
FORMAT: "CSRERR064 Function to reset shelf automatically returned error"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "cliRestore received ERROR from csrResetSys while attempting to reset shelf automatically"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-CSRERR065

SEVERITY: Information
FORMAT: "CSRERR065 While extracting name from path, Save forced to be Aborted through CLI"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: " abortallsaves issued to abort the save or a modular call to set the abort flag was made while implementing funtion to extract name from path"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR066

SEVERITY: Warning
FORMAT: "CSRERR066 Invalid parameters were passed to the function csrProcessErrno()."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: " Invalid parameters were passed to the function csrProcessErrno(). "
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-CSR_ABORT

SEVERITY: Information
FORMAT: "%s occurrence %d Save Aborted through CLI."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: " abortallsaves CLI was issued to abort saveallcnf"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-CSRDBRST

SEVERITY: Information
FORMAT: "%s occurrence %d DB Counter reset"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "While save in progress DB counter initialisation failed"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-CSRDBUPD

SEVERITY: Information
FORMAT: "CSR_DBUPDATED %s occurrence %d DB updated."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "DB status in csrTable.txt is updated successfully"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR068

SEVERITY: Warning
FORMAT: "CSRERR086 While attempting to clean the C:/TMP directory, config upload created CSR filename without '_'"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: " WHile cleaning C:/TMP, call to config upload function to create CSR filename, returned a file name in wrong format"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-SVALLCNF_DONE

SEVERITY: Information
FORMAT: "saveallcnf shelf configuration saved in %s. Size is %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "saveallcnf shelf configuration saved "
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-SVALLCNF_WARNIN

SEVERITY: Warning
FORMAT: "saveallcnf: Failed to list files in shelf configuration %s. Size is %d"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "saveallcnf: The saved file is corrupted. The system failed to list the files contained in it. User should retry."
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR069

SEVERITY: Warning
FORMAT: "CSRERR069 While saving DBUpdated=%s to csrTable.txt encountered error"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: " Encountered error while writing into csrTable.txt"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR070

SEVERITY: Warning
FORMAT: "CSRERR070 While saving check to db updates returned error %s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "call to wrapper func to DB & Shm failed"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR071

SEVERITY: Warning
FORMAT: "CSRERR071 Abort the saving process if invoked through SNMP %s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "If invoked thru SNMP and Db is found updated abort process"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR073

SEVERITY: Warning
FORMAT: "CSRERR073 writing 'Counters'(failed init)in csrTable.txt returned error %s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "call to 'csrSaveCopyToTxt'(failed init) returned error"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR074

SEVERITY: Warning
FORMAT: "CSRERR074 writing 'Counters' in csrTable.txt returned error %s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "call to 'csrSaveCopyToTxt() returned error"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR075

SEVERITY: Warning
FORMAT: "CSRERR075 call to ssiDiskDbLslotCounterGet failed %s"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "In the wrapper func csrIsDbShmUpdated call to Db API failed"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR076

SEVERITY: Warning
FORMAT: "CSRERR076 Func to copy to status file VERSION \"%s\",returned ERROR."
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "saveFile received ERROR from csrSaveCopyToTxt while writing version info"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR077

SEVERITY: Warning
FORMAT: "CSRERR077 User response was negative when prompted about DB updates(V3)"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "call to csrQueryUserIfUpdates()(ver3) returned error"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-CSRERR078

SEVERITY: Information
FORMAT: "CSRERR078 User selects Yes when prompted to restore inconsistent file"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "In csrQueryUserIfUpdates() user selected Yes when queried"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-5-CSRERR079

SEVERITY: Warning
FORMAT: "CSRERR079 User response was negative when prompted about DB updates(V4)"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "call to csrQueryUserIfUpdates()(ver4) returned error"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-CSRERR080

SEVERITY: Information
FORMAT: "CSRERR080User selects Yes-prompted Status & Version file doesnt match\n"
FLAG: No Flag
THROTTLING: One Tick
EXPLANATION: "user selected Yes when queried"
RECOMMENDED ACTION: No Recommended Action
REQUIRED INFO: No Required Info

CSR-7-CSRERR081

SEVERITY: Information
FORMAT: "CSRERR081User selects NO -prompted Status & Version file doesnt match\n"