|
|
Global Configuration Macros
|
cisco-cg-global |
Use this global configuration macro to configure the switch settings for the industrial Ethernet environment. This macro is automatically applied when you use Express Setup to initially configure the switch. Note: You must first apply the cisco-cg-global macro for the interface configuration macros to work properly. |
cisco-cg-password |
Use this global configuration macro to configure the password settings for the switch. |
no-cisco-cg-password |
Use the no form of this global configuration macro to delete the macro from the switch. |
cisco-sniffer |
Use this global configuration macro to configure SPAN functionality to analyze traffic on another port of the switch. |
no-cisco-sniffer |
Use the no form of this global configuration macro to delete the macro from the interface. |
Interface Configuration Macros
|
cisco-ethernetip |
Use this interface configuration macro when connecting the switch to an EtherNet IP device. Note: You must first apply the cisco-ie-global macro for the cisco-ethernetip macro to work properly. |
no-cisco-ethernetip |
Use the no form of this global configuration macro to delete the macro from the interface. |
cisco-cg-hmi |
Use this interface configuration macro for increased network security and reliability when connecting a desktop device, such as a PC, to a switch port. This macro is optimized for utility deployments. |
no-cisco-cg-hmi |
Use the no form of this interface configuration macro to delete the macro from the switch. |
cisco-cg-ied |
Use this interface configuration macro when connecting the switch to an IED. |
no-cisco-cg-ied |
Use the no form of this interface configuration macro to delete the macro from the switch. |
cisco-ie-phone |
Use this interface configuration macro when connecting a desktop device such as a PC with a Cisco IP Phone to a switch port. This macro is an extension of the cisco-desktop macro and provides the same security and resiliency features, but with the addition of dedicated voice VLANs to ensure proper treatment of delay-sensitive voice traffic. |
no-cisco-ie-phone |
Use the no form of this interface configuration macro to delete the macro from the switch. |
cisco-cg-router |
Use this interface configuration macro when connecting the switch and a WAN router. This macro is optimized for utility deployments. |
no-cisco-cg-router |
Use the no form of this interface configuration macro to delete the macro from the switch. |
cisco-cg-switch |
Use this interface configuration macro when connecting a ring of switches. This macro is optimized for utility deployments. |
no-cisco-cg-switch |
Use the no form of this interface configuration macro to delete the macro from the switch. |
cisco-cg-wireless |
Use this interface configuration macro when connecting the switch and a wireless access point. This macro is optimized for utility deployments. |
no-cisco-cg-wireless |
Use the no form of this interface configuration macro to delete the macro from the switch. |
cisco-desktop |
Use this interface configuration macro for increased network security and reliability when connecting a desktop device, such as a PC, to a switch port. This macro is optimized for utility deployments. |
no-cisco-desktop |
Use the no form of this interface configuration macro to delete the macro from the interface. |
cisco-ie-none |
The None Smartport is used to clear all Smartport configurations from the port. |
cisco-ethernetip |
Use this interface configuration macro when connecting the switch to an EtherNet IP device. Note: You must first apply the cisco-ie-global macro for the cisco-ethernetip macro to work properly. |
cisco-ie-global |
Use this global configuration macro to configure the switch settings for the industrial Ethernet environment. This macro is automatically applied when you use Express Setup to initially configure the switch. Note: You must first apply the cisco-ie-global macro for the cisco-ethernetip macro to work properly. |
cisco-ie-desktop |
Use this interface configuration macro for increased network security and reliability when connecting a desktop device, such as a PC, to a switch port. This macro is optimized for industrial automation traffic. |
cisco-ie-phone |
Use this interface configuration macro when connecting a desktop device such as a PC with a Cisco IP Phone to a switch port. This macro is an extension of the cisco-ie-desktop macro and provides the same security and resiliency features, but with the addition of dedicated voice VLANs to ensure proper treatment of delay-sensitive voice traffic. This macro is optimized for industrial automation traffic. |
cisco-ie-router |
Use this interface configuration macro when connecting the switch and a WAN router. This macro is optimized for industrial automation traffic. |
cisco-ie-switch |
Use this interface configuration macro when connecting an access switch and a distribution switch or between access switches connected using small form-factor pluggable (SFP) modules. This macro is optimized for industrial automation traffic. |
cisco-ie-wireless |
Use this interface configuration macro when connecting the switch and a wireless access point. This macro is optimized for industrial automation traffic. |