|| Shows the state of the active CPU Switch module. Values are as follows:
- Standby HOT
|| Displays the state of the peer (or standby) CPU Switch module. Values are as follows:
|| Displays the current state of the
Values are as follows:
- Simplex— Single CPU switch module
- Duplex— Two CPU switch modules
|| Displays the unit ID of the CPU switch module.
|Redundancy Mode (Operational)
||Displays the current operational redundancy mode supported on the unit.
|Redundancy Mode (Configured)
||Displays the current configured redundancy mode supported on the unit.
||Displays the current functioning redundancy state of the unit. Values are as follows:
|| Displays whether manual switchovers have been enabled without the force option.
|| Displays whether communications are up or down between the two CPU Switch modules.
|| Displays the number of redundancy subsystems that are registered as RF clients.
|Client Notification TMR
|| Displays, in milliseconds, the time that an internal RF timer has for notifying RF client subsystems.
|Keep Alive TMR
|| Displays, in milliseconds, the time interval the RF manager has for sending keep-alive messages to its peer on the standby CPU switch module.
|Keep Alive Count
|| Displays the number of keep-alive messages sent without receiving a response from the standby CPU Switch module.
|Keep Alive Threshold
|| Displays the threshold for declaring that interprocessor communications are down when keep-alive messages have been enabled (which is the default).
|RF Debug Mask
|| Displays an internal mask used by the RF to keep track of which debug modes are on.