Catalyst 3750-X and 3560-X Switch Command Reference, Release 12.2(55)SE
Preface
Downloads: This chapterpdf (PDF - 101.0KB) The complete bookPDF (PDF - 25.17MB) | Feedback

Preface

Table Of Contents

Preface

Audience

Purpose

Conventions

Related Publications

Obtaining Documentation and Submitting a Service Request


Preface


Audience

This guide is for the networking professional using the Cisco IOS command-line interface (CLI) to manage the Catalyst 3750-X and 3560-X switch, or the Catalyst 3750-X switch stack, referred to as the switch. Before using this guide, you should have experience working with the Cisco IOS commands and the switch software features. Before using this guide, you should have experience working with the concepts and terminology of Ethernet and local area networking.

Purpose

This guide provides the information that you need about the Layer 2 and Layer 3 commands that have been created or changed for use with the Catalyst 3750-X and 3560-X switches. For information about the standard Cisco IOS Release 12.2 commands, see the Cisco IOS documentation set available from the Cisco.com home page by selecting Technical Support & Documentation > Documentation > Cisco IOS Software.


Note Switches running the LAN base feature set do not support Layer 3 features.


This guide does not provide procedures for configuring your switch. For detailed configuration procedures, see the software configuration guide for this release.

This guide does not describe system messages you might encounter. For more information, see the system message guide for this release.

For documentation updates, see the release notes for this release.

Conventions

This publication uses these conventions to convey instructions and information:

Command descriptions use these conventions:

Commands and keywords are in boldface text.

Arguments for which you supply values are in italic.

Square brackets ([ ]) means optional elements.

Braces ({}) group required choices, and vertical bars ( | ) separate the alternative elements.

Braces and vertical bars within square brackets ([{ | }]) mean a required choice within an optional element.

Interactive examples use these conventions:

Terminal sessions and system displays are in screen font.

Information you enter is in boldface screen font.

Nonprinting characters, such as passwords or tabs, are in angle brackets (< >).

Notes, cautions, and warnings use these conventions and symbols:


Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in this manual.



Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.

Related Publications

Documents with complete information about the switch are available from these Cisco.com sites:

Catalyst 3750-X
http://www.cisco.com/en/US/products/ps10745/tsd_products_support_series_home.html

Catalyst 3560-X
http://www.cisco.com/en/US/products/ps10744/tsd_products_support_series_home.html


Note Before installing, configuring, or upgrading the switch, see these documents:

For initial configuration information, see the "Using Express Setup" section in the getting started guide or the "Configuring the Switch with the CLI-Based Setup Program" appendix in the hardware installation guide.

For device manager requirements, see the "System Requirements" section in the release notes.

For Network Assistant requirements, see the Getting Started with Cisco Network Assistant.

For cluster requirements, see the Release Notes for Cisco Network Assistant.

For upgrade information, see the "Downloading Software" section in the release notes.


For more information, see these documents on Cisco.com.

Release Notes for the Catalyst 3750-X and 3560-X Switch

Catalyst 3750-X and 3560-X Switch Getting Started Guide

Catalyst 3750-X and 3560-X Switch Hardware Installation Guide

Regulatory Compliance and Safety Information for the Catalyst 3750-X and 3560-X Switch

Catalyst 3750-X and 3560-X Switch Software Configuration Guide

Catalyst 3750-X and 3560-X Switch Command Reference

Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide

Cisco IOS Software Activation

Auto Smartports Configuration Guide

Cisco EnergyWise Configuration Guide

Installation Notes for the Catalyst 3750-X and Catalyst 3560-X Switch Power Supply Modules

Installation Notes for the Catalyst 3750-X and 3560-X Switch Fan Module

Installation Notes for the Catalyst 3750-X and 3560-X Switch Network Modules

Getting Started with Cisco Network Assistant

Release Notes for Cisco Network Assistant

Information about Cisco SFP and SFP+ modules is available from this Cisco.com site:
http://www.cisco.com/en/US/products/hw/modules/ps5455/prod_installation_guides_list.html

SFP compatibility matrix documents are available from this Cisco.com site:
http://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html

For information about the Network Admission Control (NAC) features, see the Network Admission Control Software Configuration Guide

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.