Numerics -
A -
B -
C -
D -
E -
F -
G -
H -
I -
J -
L -
M -
N -
P -
Q -
R -
S -
T -
U -
V -
Index
Numerics
802.1Q trunk ports and native VLANs 2-593
802.1Q tunnel ports
configuring 2-535
displaying 2-318
limitations 2-536
802.1x
and switchport modes 2-536
violation error recovery 2-93
See also port-based authentication
A
aaa accounting dot1x command 2-1
aaa authentication dot1x command 2-3
AAA methods 2-3
abort command 2-591
access control entries
See ACEs
access control lists
See ACLs
access groups
IP 2-104
MAC, displaying 2-378
access map configuration mode 2-179
access mode 2-535
access ports 2-535
ACEs 2-71, 2-240
ACLs
deny 2-69
displaying 2-281
ACLs (continued)
for non-IP protocols 2-161
IP 2-104
matching 2-179
on Layer 2 interfaces 2-104
permit 2-238
action command 2-5
address aliasing 2-227
aggregate-port learner 2-232
allowed VLANs 2-554
apply command 2-591
archive download-sw command 2-7
archive tar command 2-10
archive upload-sw command 2-13
arp access-list command 2-15
audience xvii
authorization state of controlled port 2-82
autonegotiation of duplex mode 2-90
auto qos voip command 2-17
B
BackboneFast, for STP 2-474
backup interfaces
configuring 2-531
displaying 2-337
boot (boot loader) command A-2
boot boothlpr command 2-22
boot config-file command 2-23
boot enable-break command 2-24
boot helper command 2-25
boot helper-config file command 2-26
booting
Cisco IOS image 2-29
displaying environment variables 2-291
interrupting 2-24
manually 2-27
boot loader
accessing A-1
booting
Cisco IOS image A-2
helper image 2-25
directories
creating A-15
displaying a list of A-7
removing A-19
displaying
available commands A-12
memory heap utilization A-14
version A-26
environment variables
described A-20
displaying settings A-20
location of A-21
setting A-20
unsetting A-24
files
copying A-5
deleting A-6
displaying a list of A-7
displaying the contents of A-4, A-16, A-23
renaming A-17
file system
formatting A-10
initializing flash A-9
running a consistency check A-11
loading helper images A-13
prompt A-1
resetting the system A-18
boot manual command 2-27
boot private-config-file command 2-28
boot system command 2-29
BPDU filtering, for spanning tree 2-475, 2-507
BPDU guard, for spanning tree 2-477, 2-507
broadcast storm control 2-524
C
candidate switches
See clusters
cat (boot loader) command A-4
caution, description xviii
CDP, enabling protocol tunneling for 2-148
channel-group command 2-30
channel-protocol command 2-33
Cisco Network Assistant
See Network Assistant xviii
Cisco SoftPhone
auto-QoS configuration 2-17
trusting packets sent from 2-219
class command 2-34
class-map command 2-36
class maps
creating 2-36
defining the match criteria 2-181
displaying 2-296
class of service
See CoS
clear ip arp inspection log command 2-38
clear ip arp inspection statistics command 2-39
clear ipc command 2-41
clear ip dhcp snooping database command 2-40
clear l2protocol-tunnel counters command 2-42
clear lacp command 2-43
clear mac address-table command 2-44
clear pagp command 2-46
clear spanning-tree counters command 2-47
clear spanning-tree detected-protocols command 2-48
clear vmps statistics command 2-49
clear vtp counters command 2-50
cluster commander-address command 2-51
cluster discovery hop-count command 2-53
cluster enable command 2-54
cluster holdtime command 2-56
cluster member command 2-57
cluster outside-interface command 2-59
cluster requirements xix
cluster run command 2-60
clusters
adding candidates 2-57
binding to HSRP group 2-61
building manually 2-57
communicating with
devices outside the cluster 2-59
members by using Telnet 2-261
debug messages, display B-4
displaying
candidate switches 2-299
debug messages B-4
member switches 2-301
status 2-297
hop-count limit for extended discovery 2-53
HSRP standby groups 2-61
redundancy 2-61
SNMP trap 2-465
cluster standby-group command 2-61
cluster timer command 2-63
command modes defined 1-1
commands changed in Cisco IOS Release 12.2(20)SE 1-5
command switch
See clusters
configuration, initial
See getting started guide and hardware installation guide
configuration files
password recovery disable considerations A-1
specifying the name 2-23, 2-28
configuring multiple interfaces 2-99
config-vlan mode
commands 2-577
description 1-4
entering 2-576
summary 1-2
conventions
command xviii
for examples xviii
publication xviii
text xviii
copy (boot loader) command A-5
CoS
assigning default value to incoming packets 2-189
assigning to Layer 2 protocol packets 2-151
overriding the incoming value 2-189
CoS-to-DSCP map 2-193
CPU ASIC statistics, displaying 2-303
D
debug auto qos command B-2
debug cluster command B-4
debug dot1x command B-6
debug dtp command B-7
debug etherchannel command B-8
debug ilpower command B-9
debug interface command B-12
debug ip dhcp snooping command B-10
debug ip igmp filter command B-13
debug ip igmp max-groups command B-14
debug ip igmp snooping command B-15
debug ip verify source packet command B-11
debug lacp command B-16
debug mac-notification command B-17
debug matm command B-18
debug monitor command B-19
debug mvrdbg command B-20
debug nvram command B-21
debug pagp command B-22
debug platform acl command B-23
debug platform configuration command B-31
debug platform cpu-queues command B-24
debug platform device-manager command B-26
debug platform dot1x command B-27
debug platform etherchannel command B-28
debug platform fallback-bridging command B-29
debug platform forw-tcam command B-30
debug platform ip arp inspection command B-32
debug platform ip dhcp command B-33
debug platform ip igmp snooping command B-34
debug platform led command B-36
debug platform matm command B-37
debug platform messaging application command B-38
debug platform phy command B-39
debug platform pm command B-40
debug platform port-asic command B-42
debug platform port-security command B-43
debug platform qos-acl-tcam command B-44
debug platform remote-commands command B-45
debug platform resource-manager command B-46
debug platform snmp command B-47
debug platform span command B-48
debug platform supervisor-asic command B-49
debug platform sw-bridge command B-50
debug platform tcam command B-51
debug platform udld command B-54
debug platform vlan command B-55
debug pm command B-56
debug port-security command B-58
debug qos-manager command B-59
debug spanning-tree backbonefast command B-62
debug spanning-tree bpdu command B-63
debug spanning-tree bpdu-opt command B-64
debug spanning-tree command B-60
debug spanning-tree mstp command B-65
debug spanning-tree switch command B-67
debug spanning-tree uplinkfast command B-69
debug sw-vlan command B-70
debug sw-vlan ifs command B-72
debug sw-vlan notification command B-73
debug sw-vlan vtp command B-75
debug udld command B-77
debug vqpc command B-79
define interface-range command 2-64
delete (boot loader) command A-6
delete command 2-66
deny (ARP access-list configuration) command 2-67
deny command 2-69
detect mechanism, causes 2-91
device manager requirements xviii
DHCP snooping
enabling
on a VLAN 2-132
option 82 2-127
trust on an interface 2-130
error recovery timer 2-93
rate limiting 2-129
DHCP snooping binding database
binding file, configuring 2-125
bindings
adding 2-123
deleting 2-123
clearing database agent statistics 2-40
database agent, configuring 2-125
displaying
binding entries 2-353
database agent status 2-355
renewing 2-265
dir (boot loader) command A-7
directories, deleting 2-66
documentation, related xviii
document conventions xviii
domain name, VTP 2-601, 2-605
dot1x command 2-72
dot1x default command 2-74
dot1x guest-vlan command 2-75
dot1x host-mode command 2-77
dot1x initialize command 2-78
dot1x max-req command 2-79, 2-80
dot1x multiple-hosts command 2-81
dot1x port-control command 2-82
dot1x re-authenticate command 2-84
dot1x re-authentication command 2-85
dot1x reauthentication command 2-86
dot1x timeout command 2-87
dropping packets, with ACL matches 2-5
drop threshold, Layer 2 protocol tunneling 2-148
DSCP-to-CoS map 2-193
DSCP-to-DSCP-mutation map 2-193
DTP 2-536
DTP flap
error detection for 2-91
error recovery timer 2-93
DTP negotiation 2-540
duplex command 2-89
dynamic-access ports
configuring 2-529
restrictions 2-530
dynamic ARP inspection
ARP ACLs
apply to a VLAN 2-109
define 2-15
deny packets 2-67
display 2-286
permit packets 2-236
clear
log buffer 2-38
statistics 2-39
display
ARP ACLs 2-286
configuration and operating state 2-349
log buffer 2-349
statistics 2-349
trust state and rate limit 2-349
dynamic ARP inspection (continued)
enable per VLAN 2-119
error detection for 2-91
error recovery timer 2-93
log buffer
clear 2-38
configure 2-113
display 2-349
rate-limit incoming ARP packets 2-111
statistics
clear 2-39
display 2-349
trusted interface state 2-115
type of packet logged 2-120
validation checks 2-117
dynamic auto VLAN membership mode 2-535
dynamic desirable VLAN membership mode 2-535
Dynamic Host Configuration Protocol (DHCP)
See DHCP snooping
Dynamic Trunking Protocol
See DTP
E
EAP-request/identity frame
maximum number to send 2-80
response time before retransmitting 2-87
encapsulation methods 2-554
environment variables, displaying 2-291
errdisable detect cause command 2-91
errdisable recovery command 2-93
error conditions, displaying 2-328
error disable detection 2-91
error-disabled interfaces, displaying 2-337
EtherChannel
assigning Ethernet interface to channel group 2-30
creating port-channel logical interface 2-97
debug EtherChannel/PAgP, display B-8
debug platform-specific events, display B-28
EtherChannel (continued)
displaying 2-332
enabling Layer 2 protocol tunneling for
LACP 2-149
PAgP 2-149
UDLD 2-149
interface information, displaying 2-337
LACP
clearing channel-group information 2-43
debug messages, display B-16
displaying 2-374
modes 2-30
port priority for hot-standby ports 2-152
restricting a protocol 2-33
system priority 2-154
load-distribution methods 2-248
PAgP
aggregate-port learner 2-232
clearing channel-group information 2-46
debug messages, display B-22
displaying 2-421
error detection for 2-91
error recovery timer 2-93
learn method 2-232
modes 2-30
physical-port learner 2-232
priority of interface for transmitted traffic 2-234
Ethernet controller, internal register display 2-305
Ethernet statistics, collecting 2-267
examples, conventions for xviii
exit command 2-591
extended discovery of candidate switches 2-53
extended-range VLANs
and allowed VLAN list 2-554
and pruning-eligible list 2-554
configuring 2-576
extended system ID for STP 2-483
F
fan information, displaying 2-324
file name, VTP 2-601
files, deleting 2-66
flash_init (boot loader) command A-9
Flex Links
configuring 2-531
displaying 2-337
flowcontrol command 2-95
format (boot loader) command A-10
forwarding packets, with ACL matches 2-5
forwarding results, display C-5
frame forwarding information, displaying C-5
front-end controller
counter and status information C-7
fsck (boot loader) command A-11
G
global configuration mode 1-2, 1-3
H
hardware ACL statistics 2-281
help (boot loader) command A-12
hierarchical policy maps 2-246
hop-count limit for clusters 2-53
host connection, port configuration 2-534
host ports, private VLANs 2-538
Hot Standby Router Protocol
See HSRP
HSRP
binding HSRP group to cluster 2-61
standby group 2-61
I
IGMP filters
applying 2-133
debug messages, display B-13
IGMP groups, setting maximum 2-134
IGMP maximum groups, debugging B-14
IGMP profiles
creating 2-136
displaying 2-357
IGMP snooping
displaying 2-358, 2-361
enabling 2-138
multicast table 1-5, 2-362
report suppression 2-141
images
See software images
Immediate-Leave feature, MVR 2-229
Immediate-Leave processing 2-138
initial configuration
See getting started guide and hardware installation guide
interface command 2-102
interface configuration mode 1-2, 1-4
interface port-channel command 2-97
interface range command 2-99
interface-range macros 2-64
interfaces
assigning Ethernet interface to channel group 2-30
configuring 2-89
configuring multiple 2-99
creating port-channel logical 2-97
debug messages, display B-12
disabling 2-463
displaying the MAC address table 2-390
restarting 2-463
interface speed, configuring 2-516
internal registers, displaying 2-305, 2-314
Internet Group Management Protocol
See IGMP
invalid GBIC
error detection for 2-91
error recovery timer 2-93
ip address command 2-107
IP addresses, setting 2-107
IP address matching 2-179
ip arp inspection filter vlan command 2-109
ip arp inspection limit command 2-111
ip arp inspection log-buffer command 2-113
ip arp inspection trust command 2-115
ip arp inspection validate command 2-117
ip arp inspection vlan command 2-119
ip arp inspection vlan logging command 2-120
IP DHCP snooping
See DHCP snooping
ip dhcp snooping binding command 2-123
ip dhcp snooping command 2-122
ip dhcp snooping database command 2-125
ip dhcp snooping information option command 2-127
ip dhcp snooping limit rate command 2-129
ip dhcp snooping trust command 2-130
ip dhcp snooping verify command 2-131
ip dhcp snooping vlan command 2-132
ip igmp filter command 2-133
ip igmp max-groups command 2-134
ip igmp profile command 2-136
ip igmp snooping command 2-138
ip igmp snooping report-suppression command 2-141
IP multicast addresses 2-226
IP phones
auto-QoS configuration 2-17
trusting packets sent from 2-219
IP-precedence-to-DSCP map 2-193
ip source binding command 2-143
IP source guard
disabling 2-147
displaying
binding entries 2-364
configuration 2-365
dynamic binding entries only 2-353
enabling 2-147
static IP source bindings 2-143
ip ssh command 2-145
ip verify source command 2-147
J
jumbo frames
See MTU
L
l2protocol-tunnel command 2-148
l2protocol-tunnel cos command 2-151
LACP
See EtherChannel
lacp port-priority command 2-152
lacp system-priority command 2-154
Layer 2 mode, enabling 2-527
Layer 2 protocol ports, displaying 2-371
Layer 2 protocol-tunnel
error detection for 2-91
error recovery timer 2-93
Layer 2 protocol tunnel counters 2-42
Layer 2 protocol tunneling error recovery 2-149
Layer 2 traceroute
IP addresses 2-567
MAC addresses 2-564
Layer 3 mode, enabling 2-527
line configuration mode 1-2, 1-5
Link Aggregation Control Protocol
See EtherChannel
link flap
error detection for 2-91
error recovery timer 2-93
load_helper (boot loader) command A-13
load-distribution methods for EtherChannel 2-248
logging event power-inline-status command 2-156
logging file command 2-157
logical interface 2-97
loopback error
detection for 2-91
recovery timer 2-93
loop guard, for spanning tree 2-484, 2-488
M
mac access-group command 2-159
MAC access-groups, displaying 2-378
MAC access list configuration mode 2-161
mac access-list extended command 2-161
MAC access lists 2-69
MAC addresses
displaying
aging time 2-384
all 2-382
dynamic 2-388
notification settings 2-392
number of addresses in a VLAN 2-386
per interface 2-390
per VLAN 2-396
static 2-394
static and dynamic entries 2-380
dynamic
aging time 2-163
deleting 2-44
displaying 2-388
enabling MAC address notification 2-164
matching 2-179
MAC addresses (continued)
static
adding and removing 2-166
displaying 2-394
dropping on an interface 2-167
tables 2-382
MAC address notification, debugging B-17
mac address-table aging-time 2-159, 2-179
mac address-table aging-time command 2-163
mac address-table notification command 2-164
mac address-table static command 2-166
mac address-table static drop command 2-167
macro description command 2-172
macro global command 2-173
macro global description command 2-176
macro name command 2-177
macros
adding a description 2-172
adding a global description 2-176
applying 2-173
creating 2-177
displaying 2-423
interface range 2-64, 2-99
specifying parameter values 2-173
tracing 2-173
manual
audience xvii
purpose of xvii
maps
QoS
defining 2-193
displaying 2-406
VLAN
creating 2-588
defining 2-179
displaying 2-455
match (access-map configuration) command 2-179
match (class-map configuration) command 2-181
maximum transmission unit
See MTU
mdix auto command 2-183
member switches
See clusters
memory (boot loader) command A-14
mkdir (boot loader) command A-15
mls qos aggregate-policer command 2-187
mls qos command 2-185
mls qos cos command 2-189
mls qos dscp-mutation command 2-191
mls qos map command 2-193
mls qos queue-set output buffers command 2-197
mls qos queue-set output threshold command 2-199
mls qos srr-queue input bandwidth command 2-203
mls qos srr-queue input buffers command 2-205
mls qos-srr-queue input cos-map command 2-207
mls qos srr-queue input dscp-map command 2-209
mls qos srr-queue input priority-queue command 2-211
mls qos srr-queue input threshold command 2-213
mls qos-srr-queue output cos-map command 2-215
mls qos srr-queue output dscp-map command 2-217
mls qos trust command 2-219
mls qos vlan-based command 2-221
mode, MVR 2-226
Mode button, and password recovery 2-270
modes, commands 1-1
monitor session command 2-222
more (boot loader) command A-16
MSTP
displaying 2-437
interoperability 2-48
link type 2-486
MST region
aborting changes 2-492
applying changes 2-492
configuration name 2-492
configuration revision number 2-492
current or pending display 2-492
MSTP (continued)
MST region (continued)
displaying 2-437
MST configuration mode 2-492
VLANs-to-instance mapping 2-492
path cost 2-494
protocol mode 2-490
restart protocol migration process 2-48
root port
loop guard 2-484
preventing from becoming designated 2-484
restricting which can be root 2-484
root guard 2-484
root switch
affects of extended system ID 2-483
hello-time 2-497, 2-503
interval between BDPU messages 2-498
interval between hello BPDU messages 2-497, 2-503
max-age 2-498
maximum hop count before discarding BPDU 2-499
port priority for selection of 2-500
primary or secondary 2-503
switch priority 2-502
state changes
blocking to forwarding state 2-509
enabling BPDU filtering 2-475, 2-507
enabling BPDU guard 2-477, 2-507
enabling Port Fast 2-507, 2-509
forward-delay time 2-496
length of listening and learning states 2-496
rapid transition to forwarding 2-486
shutting down Port Fast-enabled ports 2-507
state information display 2-436
MTU
configuring size 2-561
displaying global setting 2-444
multicast group address, MVR 2-229
multicast groups, MVR 2-227
multicast router learning method 2-138
multicast router ports, configuring 2-138
multicast storm control 2-524
multicast VLAN, MVR 2-226
multicast VLAN registration
See MVR
multiple hosts on authorized port 2-77
Multiple Spanning Tree Protocol
See MSTP
MVR
and address aliasing 2-227
configuring 2-226
configuring interfaces 2-229
debug messages, display B-20
displaying 2-415
displaying interface information 2-417
members, displaying 2-419
mvr (global configuration) command 2-226
mvr (interface configuration) command 2-229
mvr vlan group command 2-230
N
native VLANs 2-554
native VLAN tagging 2-593
Network Assistant requirements xviii
nonegotiate
DTP messaging 2-540
speed 2-516
non-IP protocols
denying 2-69
forwarding 2-238
non-IP traffic access lists 2-161
non-IP traffic forwarding
denying 2-69
permitting 2-238
normal-range VLANs 2-576, 2-582
note, description xviii
no vlan command 2-576, 2-586
P
PAgP
See EtherChannel
pagp learn-method command 2-232
pagp port-priority command 2-234
password, VTP 2-601, 2-605
password-recovery mechanism, enabling and disabling 2-270
permit (ARP access-list configuration) command 2-236
permit command 2-238
per-VLAN spanning-tree plus
See STP
physical-port learner 2-232
PIM-DVMRP, as multicast router learning method 2-138
PoE
configuring the power management mode 2-250
displaying controller register values 2-312
displaying power management information 2-431
logging of status 2-156
police aggregate command 2-243
police command 2-241
policed-DSCP map 2-193
policy-map command 2-245
policy maps
applying to an interface 2-272, 2-276
creating 2-245
displaying 2-426
hierarchical 2-246
policers
displaying 2-399
for a single class 2-241
for multiple classes 2-187, 2-243
policed-DSCP map 2-193
traffic classification
defining the class 2-34
defining trust states 2-569
setting DSCP or IP precedence values 2-274
Port Aggregation Protocol
See EtherChannel
port-based authentication
802.1x AAA accounting methods 2-1
AAA method list 2-3
debug messages, display B-6
enabling 802.1x
globally 2-72
per interface 2-82
guest VLAN 2-75
host modes 2-77
initialize an interface 2-78
manual control of authorization state 2-82
multiple hosts on authorized port 2-77
periodic re-authentication
enabling 2-86
time between attempts 2-87
quiet period between failed authentication exchanges 2-87
re-authenticating 802.1x-enabled ports 2-84
resetting configurable 802.1x parameters 2-74
switch-to-authentication server retransmission time 2-87
switch-to-client frame-retransmission number 2-79 to 2-80
switch-to-client retransmission time 2-87
port-channel load-balance command 2-248
Port Fast, for spanning tree 2-509
port ranges, defining 2-64
ports, debugging B-56
ports, protected 2-553
port security
aging 2-547
debug messages, display B-58
enabling 2-542
violation error recovery 2-93
port trust states for QoS 2-219
port types, MVR 2-229
power information, displaying 2-324
power inline command 2-250
Power over Ethernet
See PoE
priority-queue command 2-253
private-vlan command 2-255
private-vlan mapping command 2-258
private VLANs
association 2-551
configuring 2-255
configuring ports 2-538
displaying 2-450
host ports 2-538
mapping
configuring 2-551
displaying 2-337
promiscuous ports 2-538
privileged EXEC mode 1-2, 1-3
promiscuous ports, private VLANs 2-538
protected ports, displaying 2-343
pruning
VLANs 2-554
VTP
displaying interface information 2-337
enabling 2-601, 2-605
pruning-eligible VLAN list 2-556
PVST+
See STP
Q
QoS
auto-QoS
configuring 2-17
debug messages, display 1-5, B-2
displaying 2-287
class maps
creating 2-36
defining the match criteria 2-181
displaying 2-296
QoS (continued)
defining the CoS value for an incoming packet 2-189
displaying configuration information 2-287, 2-398
DSCP trusted ports
applying DSCP-to-DSCP-mutation map to 2-191
defining DSCP-to-DSCP-mutation map 2-193
egress queues
allocating buffers 2-197
defining the CoS output queue threshold map 2-215
defining the DSCP output queue threshold map 2-217
displaying buffer allocations 2-402
displaying CoS output queue threshold map 2-406
displaying DSCP output queue threshold map 2-406
displaying queueing strategy 2-402
displaying queue-set settings 2-409, 2-411
enabling bandwidth shaping and scheduling 2-520
enabling bandwidth sharing and scheduling 2-522
limiting the maximum output on a port 2-518
mapping a port to a queue-set 2-260
mapping CoS values to a queue and threshold 2-215
mapping DSCP values to a queue and threshold 2-217
setting maximum and reserved memory allocations 2-199
setting WTD thresholds 2-199
enabling 2-185
ingress queues
allocating buffers 2-205
assigning SRR scheduling weights 2-203
defining the CoS input queue threshold map 2-207
defining the DSCP input queue threshold map 2-209
displaying buffer allocations 2-402
displaying CoS input queue threshold map 2-406
displaying DSCP input queue threshold map 2-406
displaying queueing strategy 2-402
displaying settings for 2-400
enabling the priority queue 2-211
mapping CoS values to a queue and threshold 2-207
mapping DSCP values to a queue and threshold 2-209
setting WTD thresholds 2-213
QoS (continued)
maps
defining 2-193, 2-207, 2-209, 2-215, 2-217
displaying 2-406
policy maps
applying an aggregate policer 2-243
applying to an interface 2-272, 2-276
creating 2-245
defining policers 2-187, 2-241
displaying policers 2-399
displaying policy maps 2-426
hierarchical 2-246
policed-DSCP map 2-193
setting DSCP or IP precedence values 2-274
traffic classifications 2-34
trust states 2-569
port trust states 2-219
queues, enabling the expedite 2-253
statistics
in-profile and out-of-profile packets 2-402
packets enqueued or dropped 2-402
sent and received CoS values 2-402
sent and received DSCP values 2-402
trusted boundary for IP phones 2-219
VLAN-based 2-221
quality of service
See QoS
querytime, MVR 2-226
queue-set command 2-260
R
rapid per-VLAN spanning-tree plus
See STP
rapid PVST+
See STP
rcommand command 2-261
re-authenticating 802.1x-enabled ports 2-84
re-authentication
periodic 2-86
time between attempts 2-87
receiver ports, MVR 2-229
receiving flow-control packets 2-95
recovery mechanism
causes 2-93
display 2-293, 2-326, 2-330
timer interval 2-93
redundancy for cluster switches 2-61
remote-span command 2-263
Remote Switched Port Analyzer
See RSPAN
rename (boot loader) command A-17
renew ip dhcp snooping database command 2-265
requirements
cluster xix
device manager xviii
Network Assistant xviii
reset (boot loader) command A-18
reset command 2-591
resource templates, displaying 2-433
rmdir (boot loader) command A-19
rmon collection stats command 2-267
root guard, for spanning tree 2-484
routed ports
IP addresses on 2-108
number supported 2-108
RSPAN
configuring 2-222
displaying 2-412
filter RSPAN traffic 2-222
remote-span command 2-263
sessions
add interfaces to 2-222
displaying 2-412
start new 2-222
S
sdm prefer command 2-268
secure ports, limitations 2-543
sending flow-control packets 2-95
service password-recovery command 2-270
service-policy command 2-272
set (boot loader) command A-20
set command 2-274
setup command 2-276
setup express command 2-279
show access-lists command 2-281
show archive status command 2-284
show arp access-list command 2-286
show auto qos command 2-287
show boot command 2-291
show changes command 2-591
show class-map command 2-296
show cluster candidates command 2-299
show cluster command 2-297
show cluster members command 2-301
show controllers cpu-interface command 2-303
show controllers ethernet-controller command 2-305
show controllers power inline command 2-312
show controllers tcam command 2-314
show controllers utilization command 2-316
show controller utilization command 2-316
show current command 2-591
show dot1q-tunnel command 2-318
show dot1x command 2-319
show dtp 2-322
show env command 2-324
show errdisable detect command 2-326
show errdisable flap-values command 2-328
show errdisable recovery command 2-330
show etherchannel command 2-332
show flowcontrol command 2-335
show interfaces command 2-337
show interfaces counters command 2-347
show ip arp inspection command 2-349
show ipc command 2-367
show ip dhcp snooping binding command 2-353
show ip dhcp snooping command 2-352
show ip dhcp snooping database command 2-355
show ip igmp profile command 2-357
show ip igmp snooping command 2-358
show ip igmp snooping groups command 2-362
show ip igmp snooping mrouter command 2-361
show ip source binding command 2-364
show ip verify source command 2-365
show l2protocol-tunnel command 2-371
show lacp command 2-374
show mac access-group command 2-378
show mac address-table address command 2-382
show mac address-table aging time command 2-384
show mac address-table command 2-380
show mac address-table count command 2-386
show mac address-table dynamic command 2-388
show mac address-table interface command 2-390
show mac address-table notification command 2-392
show mac address-table static command 2-394
show mac address-table vlan command 2-396
show mls qos aggregate-policer command 2-399
show mls qos command 2-398
show mls qos input-queue command 2-400
show mls qos interface command 2-402
show mls qos maps command 2-406
show mls qos queue-set command 2-409
show mls qos vlan command 2-411
show monitor command 2-412
show mvr command 2-415
show mvr interface command 2-417
show mvr members command 2-419
show pagp command 2-421
show parser macro command 2-423
show platform acl command C-2
show platform configuration command C-3
show platform etherchannel command C-4
show platform forward command C-5
show platform frontend-controller command C-7
show platform igmp snooping command C-8
show platform ip multicast command C-10
show platform ip unicast command C-11
show platform layer4op command C-13
show platform mac-address-table command C-14
show platform messaging command C-15
show platform monitor command C-16
show platform mvr table command C-17
show platform pm command C-18
show platform port-asic command C-19
show platform port-security command C-23
show platform qos command C-24
show platform resource-manager command C-25
show platform snmp counters command C-27
show platform spanning-tree command C-28
show platform stp-instance command C-29
show platform tcam command C-30
show platform vlan command C-33
show policy-map command 2-426
show port security command 2-428
show power inline command 2-431
show proposed command 2-591
show sdm prefer command 2-433
show setup express command 2-435
show spanning-tree command 2-436
show storm-control command 2-442
show system mtu command 2-444
show trust command 2-569
show udld command 2-445
show version command 2-448
show vlan access-map command 2-455
show vlan command 2-450
show vlan command, fields 2-452
show vlan filter command 2-456
show vmps command 2-457
show vtp command 2-459
shutdown command 2-463
shutdown threshold, Layer 2 protocol tunneling 2-148
shutdown vlan command 2-464
Smartports macros
See macros
SNMP host, specifying 2-468
SNMP informs, enabling the sending of 2-465
snmp-server enable traps command 2-465
snmp-server host command 2-468
snmp trap mac-notification command 2-472
SNMP traps
enabling MAC address notification trap 2-472
enabling the MAC address notification feature 2-164
enabling the sending of 2-465
SoftPhone
See Cisco SoftPhone
software images
deleting 2-66
downloading 2-7
upgrading 2-7
uploading 2-13
software version, displaying 2-448
source ports, MVR 2-229
SPAN
configuring 2-222
debug messages, display B-19
displaying 2-412
filter SPAN traffic 2-222
sessions
add interfaces to 2-222
displaying 2-412
start new 2-222
spanning-tree backbonefast command 2-474
spanning-tree bpdufilter command 2-475
spanning-tree bpduguard command 2-477
spanning-tree cost command 2-479
spanning-tree etherchannel command 2-481
spanning-tree extend system-id command 2-483
spanning-tree guard command 2-484
spanning-tree link-type command 2-486
spanning-tree loopguard default command 2-488
spanning-tree mode command 2-490
spanning-tree mst configuration command 2-492
spanning-tree mst cost command 2-494
spanning-tree mst forward-time command 2-496
spanning-tree mst hello-time command 2-497
spanning-tree mst max-age command 2-498
spanning-tree mst max-hops command 2-499
spanning-tree mst port-priority command 2-500
spanning-tree mst priority command 2-502
spanning-tree mst root command 2-503
spanning-tree portfast (global configuration) command 2-507
spanning-tree portfast (interface configuration) command 2-509
spanning-tree port-priority command 2-505
Spanning Tree Protocol
See STP
spanning-tree uplinkfast command 2-511
spanning-tree vlan command 2-513
speed command 2-516
srr-queue bandwidth limit command 2-518
srr-queue bandwidth shape command 2-520
srr-queue bandwidth share command 2-522
SSH, configuring version 2-145
static-access ports, configuring 2-529
statistics, Ethernet group 2-267
sticky learning, enabling 2-542
storm-control command 2-524
STP
BackboneFast 2-474
counters, clearing 2-47
debug messages, display
BackboneFast events B-62
MSTP B-65
optimized BPDUs handling B-64
spanning-tree activity B-60
switch shim B-67
STP (continued)
debug messages, display (continued)
transmitted and received BPDUs B-63
UplinkFast B-69
detection of indirect link failures 2-474
enabling protocol tunneling for 2-148
EtherChannel misconfiguration 2-481
extended system ID 2-483
path cost 2-479
protocol modes 2-490
root port
accelerating choice of new 2-511
loop guard 2-484
preventing from becoming designated 2-484
restricting which can be root 2-484
root guard 2-484
UplinkFast 2-511
root switch
affects of extended system ID 2-483, 2-514
hello-time 2-513
interval between BDPU messages 2-513
interval between hello BPDU messages 2-513
max-age 2-513
port priority for selection of 2-505
primary or secondary 2-513
switch priority 2-513
state changes
blocking to forwarding state 2-509
enabling BPDU filtering 2-475, 2-507
enabling BPDU guard 2-477, 2-507
enabling Port Fast 2-507, 2-509
enabling timer to recover from error state 2-93
forward-delay time 2-513
length of listening and learning states 2-513
shutting down Port Fast-enabled ports 2-507
state information display 2-436
VLAN options 2-502, 2-513
SVIs, creating 2-102
Switched Port Analyzer
See SPAN
switching characteristics
modifying 2-527
returning to interfaces 2-527
switchport access command 2-529
switchport backup interface command 2-531
switchport block command 2-533
switchport command 2-527
switchport host command 2-534
switchport mode command 2-535
switchport mode private-vlan command 2-538
switchport nonegotiate command 2-540
switchport port-security aging command 2-547
switchport port-security command 2-542
switchport priority extend command 2-549
switchport private-vlan command 2-551
switchport protected command 2-553
switchports, displaying 2-337
switchport trunk command 2-554
switchport voice vlan command 2-557
system env temperature threshold yellow command 2-559
system message logging 2-156
system message logging, save message to flash 2-157
system mtu command 2-561
system resource templates 2-268
T
tar files, creating, listing, and extracting 2-10
TDR, running 2-563
Telnet, using to communicate to cluster switches 2-261
temperature information, displaying 2-324
templates, system resources 2-268
test cable-diagnostics tdr command 2-563
traceroute mac command 2-564
traceroute mac ip command 2-567
trunking, VLAN mode 2-535
trunk mode 2-535
trunk ports 2-535
trunks, to non-DTP device 2-536
trusted boundary for QoS 2-219
trusted port states for QoS 2-219
tunnel ports, Layer 2 protocol, displaying 2-371
type (boot loader) command A-23
U
UDLD
aggressive mode 2-571, 2-573
debug messages, display B-77
enable globally 2-571
enable per interface 2-573
error recovery timer 2-93
message timer 2-571
normal mode 2-571, 2-573
reset a shutdown interface 2-575
status 2-445
udld command 2-571
udld port command 2-573
udld reset command 2-575
unicast storm control 2-524
UniDirectional Link Detection
See UDLD
unknown multicast traffic, preventing 2-533
unknown unicast traffic, preventing 2-533
unset (boot loader) command A-24
upgrading
software images 2-7
monitoring status of 2-284
upgrading information
See release notes
UplinkFast, for STP 2-511
user EXEC mode 1-2
V
version (boot loader) command A-26
vlan (global configuration) command 2-576
vlan (VLAN configuration) command 2-582
vlan access-map command 2-588
VLAN access map configuration mode 2-588
VLAN access maps
actions 2-5
displaying 2-455
VLAN-based QoS 2-221
VLAN configuration
rules 2-579, 2-584
saving 2-576, 2-586
VLAN configuration mode
commands
VLAN 2-582
VTP 2-605
description 1-4
entering 2-590
summary 1-2
vlan database command 2-590
vlan dot1q tag native command 2-593
vlan filter command 2-594
VLAN filters, displaying 2-456
VLAN ID range 2-576, 2-582
VLAN maps
applying 2-594
creating 2-588
defining 2-179
displaying 2-455
VLAN Query Protocol
See VQP
VLANs
adding 2-576
configuring 2-576, 2-582
debug messages, display
ISL B-73
VLAN IOS file system error tests B-72
VLANs (continued)
debug messages, display (continued)
VLAN manager activity B-70
VTP B-75
displaying configurations 2-450
extended-range 2-576
MAC addresses
displaying 2-396
number of 2-386
media types 2-579, 2-584
normal-range 2-576, 2-582
private 2-538
configuring 2-255
displaying 2-450
See also private VLANs
restarting 2-464
saving the configuration 2-576
shutting down 2-464
SNMP traps for VTP 2-466, 2-469
suspending 2-464
variables 2-582
VLAN Trunking Protocol
See VTP
VMPS
configuring servers 2-599
displaying 2-457
error recovery timer 2-93
reconfirming dynamic VLAN assignments 2-596
vmps reconfirm (global configuration) command 2-597
vmps reconfirm (privileged EXEC) command 2-596
vmps retry command 2-598
vmps server command 2-599
voice VLAN
configuring 2-557
setting port priority 2-549
VQP
and dynamic-access ports 2-530
clearing client statistics 2-49
displaying information 2-457
VQP (continued)
per-server retry count 2-598
reconfirmation interval 2-597
reconfirming dynamic VLAN assignments 2-596
VTP
changing characteristics 2-601
clearing pruning counters 2-50
configuring
domain name 2-601, 2-605
file name 2-601
mode 2-601, 2-605
password 2-601, 2-605
counters display fields 2-460
VTP (continued)
displaying information 2-459
enabling
pruning 2-601, 2-605
tunneling for 2-148
Version 2 2-601, 2-605
mode 2-601, 2-605
pruning 2-601, 2-605
saving the configuration 2-576, 2-586
statistics 2-459
status 2-459
status display fields 2-461
vtp (global configuration) command 2-601
vtp (VLAN configuration) command 2-605