Auto Smartports Configuration Guide, Release 12.2(55)SE
Preface
Downloads: This chapterpdf (PDF - 88.0KB) The complete bookPDF (PDF - 2.18MB) | Feedback

Preface

Table Of Contents

Preface

Conventions

Related Publications

Obtaining Documentation, Support, and Security Guidelines


Preface


If your switch is stacking-capable (for example, a Catalyst 3750-X, 3750-E, or 2960-S switch), unless otherwise noted, the term switch refers to a standalone switch and to a switch stack.

This document describes how to configure Auto and static Smartports macros in your network. It does not describe how to install your switch. For information, see the hardware installation guide for your switch.

Catalyst 3750-X and 3560-X switches

Catalyst 3750-E and 3560-E switches

Catalyst 3750, 3560, 2975, 2960-S, and 2960 switches

Catalyst 2918 switches

For information about the Cisco IOS commands, see the Cisco IOS documentation set on Cisco.com.

This guide does not describe how to use the embedded device manager GUIs or Cisco Network Assistant (hereafter referred to as Network Assistant). For information about the device manager, see the switch online help. For information about Network Assistant, see Getting Started with Cisco Network Assistant on Cisco.com.

Conventions

This publication uses these conventions to convey instructions and information:

For command descriptions

Commands and keywords are in boldface text.

Arguments for which you supply values are in italic.

Square brackets ([ ]) mean optional elements.

Braces ({ }) group required choices, and vertical bars ( | ) separate the alternative elements.

Braces and vertical bars within square brackets ([{ | }]) mean a required choice within an optional element.

For interactive examples

Terminal sessions and system displays are in screen font.

Information that you enter is in boldface screen font.

Nonprinting characters, such as passwords or tabs, are in angle brackets (< >).

Notes, cautions, and warnings use these conventions and symbols:


Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in this manual.



Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.

Related Publications

For information about Cisco network devices running Auto Smartports, see the switch-specific documentation on Cisco.com:
http://www.cisco.com/cisco/web/support/index.html.


Note Before installing, configuring, or upgrading the switch, router, or other Cisco device, see these documents:

For initial configuration information, see the "Using Express Setup" section in the getting started guide or the "Configuring the Switch with the CLI-Based Setup Program" appendix in the hardware installation guide.

For device manager requirements, see the "System Requirements" section in the release notes.

For Network Assistant requirements, see the Getting Started with Cisco Network Assistant.

For cluster requirements, see the Release Notes for Cisco Network Assistant.

For upgrading information, see the "Downloading Software" section in the release notes.


Obtaining Documentation, Support, and Security Guidelines

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed, and set content to be delivered directly to your desktop by a reader application. The RSS feeds are a free service, and Cisco supports RSS version 2.0.