The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
C
capability l3-vservice command 1-2
cdp advertise command 2-9
clear cdp command 2-13
clear cli history command 2-14
clear cores command 2-15
clear debug-logfile command 2-16
clear line command 2-33
clear logging logfile command 2-34
clear ntp statistics command 2-35
clear ssh hosts command 2-69
clear user command 2-72
clear vsn connection command 1-3
D
debug logfile command 2-100
debug logging command 2-102
dir command 2-104
Documentation Feedback i-xii
E
F
find command 2-112
G
gunzip command 2-113
M
media command 2-124
P
password strength-check command 2-127
ping vsn command 1-8
port-profile command 1-13
pwd command 2-130
R
reload command 2-131
reload module command 2-132
rmdir command 2-133
run-script command 2-137
S
send command 2-138
setup command 2-139
show aaa command 3-1
show accounting command 3-6
show ac-driver command 3-4
show banner command 3-8
show boot command 3-9
show cdp command 3-11
show cli command 3-13
show clock command 3-15
show copyright command 3-16
show cores command 3-18
show debug command 3-19
show debug-filter command 3-21
show event-log command 3-22
show event manager internal command 3-23
show feature command 3-26
show file command 3-28
show hardware command 3-29
show hostname command 3-31
show hosts command 3-32
show http-server command 3-33
show incompatability command 3-34
show inspect ftp statistics command 3-35
show install all command 3-36
show interface command 3-37
show ip command 3-39
show ipv6 command 3-41
show kernel internal command 3-43
show line command 3-45
show logging command 3-47
show nsc-pa 3-94
show nsc-pa status 1-24
show ntp command 3-50
show password command 3-52
show policy-engine command 3-53
show processes command 3-54
show redundancy status command 3-58
show resource command 3-60
show role command 3-62
show running-config command 3-64, 3-78
show service-path connection command 3-68
show service-path statistics command 3-70
show snmp command 3-72
show sockets command 3-74
show ssh command 3-76
show system command 3-81
show tech-support command 3-83
show telnet server command 3-88
show terminal command 3-89
show user-account command 3-91
show users command 3-92
show version command 3-93
show vsn brief command 1-22, 1-25, 1-36, 1-38
show vsn connection command 1-27
show vsn detail command 1-29
show xml server command 3-105
sleep command 2-141
system cores command 2-144
system default switchport command 2-145
system hap reset command 2-146
system heartbeat command 2-147
system internal command 2-148
system memlog command 2-150
system pss command 2-152
system redundancy command 2-153
system standby command 2-154
system startup-config command 2-155
system statistics command 2-156
system switchover command 2-157
system watchdog kdgb command 2-159
T
tail command 2-160
telnet command 2-162
terminal alias command 2-163
terminal color command 2-164
terminal dont-ask command 2-165
terminal edit-mode command 2-166
terminal event-manager command 2-167
terminal history command 2-168
terminal length command 2-169
terminal log-all command 2-170
terminal output command 2-172
terminal redirection-mode command 2-173
terminal session-timeout command 2-174
terminal terminal-type command 2-175
terminal tree-update command 2-176
terminal verify-only command 2-177
terminal width command 2-178
test aaa command 2-179
traceroute command 2-181
W
where command 2-183
write erase command 2-184