This chapter introduces the basic concepts, methodology, and general troubleshooting guidelines for problems that might occur when configuring and using the Cisco VSG.
This chapter includes the following sections:
•Overview of the Troubleshooting Process
•Overview of Best Practices
•Overview of Symptoms
•Troubleshooting with Logs
•Contacting Cisco Customer Support
Overview of the Troubleshooting Process
To troubleshoot your network, follow these steps:
Step 1 Gather information that defines the specific symptoms.
Step 2 Identify all potential problems that could be causing the symptoms.
Step 3 Eliminate each potential problem (from most likely to least likely) until the symptoms disappear.
Overview of Best Practices
Best practices are the recommended steps you should take to ensure the proper operation of your network. We recommend the following general best practices for most networks:
•Maintain a consistent Cisco VSG release across all network devices.
•Refer to the release notes for your Cisco VSG release for the latest features, limitations, and caveats.
•Enable system message logging. See the "Overview of Symptoms" section.
•Verify and troubleshoot any new configuration changes after implementing the change.
This section introduces questions to ask when troubleshooting a problem with Cisco VSG or connected devices. Use the answers to these questions to identify the scope of the problem and to plan a course of action.
This section includes the following topics:
By answering the questions in the following sections, you can determine the paths you need to follow and the components that you should investigate further.
Answer the following questions to determine the status of your installation:
•Is this a newly installed system or an existing installation? (It could be a new host, switch, or VLAN.)
•Has the host ever been able to see the network?
•Are you trying to solve an existing application problem (too slow, too high latency, excessively long response time) or did the problem show up recently?
•What changed in the configuration or in the overall infrastructure immediately before the applications started to have problems?
To discover a network problem, follow these steps:
Step 1 Gather information on problems in your system. See the "Gathering Information" section.
Step 2 Verify the Layer 2 connectivity. See the "Overview of Symptoms" section.
Step 3 Verify the configuration for your end devices (storage subsystems and servers).
Step 4 Verify end-to-end connectivity. See the "Overview of Symptoms" section.
This section highlights the tools that are commonly used to troubleshoot problems within your network. These tools are a subset of what you may use to troubleshoot your specific problem.
Each chapter in this guide may include additional tools and commands specific to the symptoms and possible problems covered in that chapter.
You should also have an accurate topology of your network to help isolate problem areas.
Enter the following commands and examine the outputs:
•show logging log
•show interfaces brief
•show interface data 0
•show accounting log
•show tech support
•show ac-driver statistics
Overview of Symptoms
The symptom-based troubleshooting approach provides multiple ways to diagnose and resolve problems. By using multiple entry points with links to solutions, this guide serves users who might have identical problems that are perceived by different indicators. Search this guide in PDF form, use the index, or rely on the symptoms and diagnostics listed in each chapter as entry points to access necessary information in an efficient manner.
Using a given a set of observable symptoms on a network, it is important to be able to diagnose and correct software configuration issues and inoperable hardware components so that the problems are resolved with minimal disruption to the network. Those problems and corrective actions include the following:
•Identify key Cisco VSG troubleshooting tools.
•Obtain and analyze protocol traces using Switched Port Analyzer (SPAN) or Ethanalyzer on the Command Line Interface (CLI).
•Identify or rule out physical port issues.
•Identify or rule out switch module issues.
•Diagnose and correct Layer 2 issues.
•Diagnose and correct Layer 3 issues.
•Obtain core dumps and other diagnostic data for use by the Cisco Technical Assistance Center (TAC).
•Recover from switch upgrade failures.
The system software sends the syslog (system) messages to the console (and, optionally, to a logging server on another system) during operation. Not all messages indicate a problem with your system. Some messages are purely informational, while others might help diagnose problems with links, internal hardware, or the system software.
This section includes the following topics:
•System Message Text
•Syslog Server Implementation
System Message Text
Message-text is a text string that describes the condition. This portion of the message might contain detailed information about the event, including terminal port numbers, network addresses, or addresses that correspond to locations in the system memory address space. Because the information in these variable fields changes from message to message, it is represented here by short strings enclosed in square brackets ([ ]). A decimal number, for example, is represented as [dec].
2009 Apr 29 12:35:51 vsg %KERN-1-SYSTEM_MSG: stun_set_domain_id : Setting domain ID (1024)
Use this string to find the matching system message in the Cisco NX-OS System Messages Reference .
Each system message is followed by an explanation and recommended action. The action might be as simple as No action required or it might involve a fix or a recommendation to contact technical support as shown in the following example:
Error Message 2009 Apr 29 14:57:23 vsg %MODULE-5-MOD_OK: Module 3 is online (serial:
Explanation VEM module inserted successfully on slot 3.
Recommended Action None. This is an information message. Use theshow module command to verify the module in slot 3.
Syslog Server Implementation
The syslog facility allows the Cisco VSG device to send a copy of the message log to a host for more permanent storage. This can be useful if the logs need to be examined over a long period of time or when the Cisco VSG device is not accessible.
This example demonstrates how to configure a Cisco VSG device to use the syslog facility on a Solaris platform. Although a Solaris host is being used, syslog configuration on all UNIX and Linux systems is very similar.
Syslog uses the concept of a facility to determine how it should be handled on the syslog server (the Solaris system in this example), and the message severity. Therefore, different message severities can be handled differently by the syslog server. They could be logged to different files or e-mailed to a particular user. Specifying a severity determines that all messages of that level and greater severity (lower number) will be acted upon.
Note The Cisco VSG messages should be logged to a different file from the standard syslog file so that they cannot be confused with other non-Cisco syslog messages. The logfile should not be located on the / file system, to prevent log messages from filling up the / file system.
Syslog Client: switch1
Syslog Server: 172.22.36.211 (Solaris)
Syslog facility: local1
Syslog severity: notifications (level 5, the default)
File to log Cisco VSG messages to: /var/adm/nxos_logs
To configure a syslog server, follow these steps:
Step 1 Configure the syslog policy and server through the Cisco VNMC GUI. The configuration will be available in Cisco VSG. See the Cisco Virtual Network Management Center GUI Configuration Guide, "Configuring Syslog Policy".
Step 2 Configure the syslog server:
1. Modify /etc/syslog.conf to handle local1 messages. For Solaris, there needs to be at least one tab between the facility.severity and the action (/var/adm/nxos_logs).
#Below is for the NX-OS logging
2. Create the log file.
3. Restart syslog.
# /etc/init.d/syslog stop
# /etc/init.d/syslog start
4. Verify syslog started.
root 23508 1 0 11:01:41 ? 0:00 /usr/sbin/syslogd
Step 3 Test the syslog server by creating an event in Cisco VSG. In this case, when we change the system image messages generated are listed on syslog server. Notice that the IP address of the Cisco VSG is listed in brackets.
# tail -f /var/adm/nxos_logs
Sep 17 11:07:41 [172.22.36.142.2.2] : 2004 Sep 17 11:17:29 pacific:
%AAA-6-AAA_ACCOUNTING_MESSAGE: update:220.127.116.11@pts/3:admin:configure terminal ; no
boot system (SUCCESS)
Sep 17 11:07:49 [172.22.36.142.2.2] : 2004 Sep 17 11:17:36 pacific:
%AAA-6-AAA_ACCOUNTING_MESSAGE: update:18.104.22.168@pts/3:admin:Boot Image list set to
Sep 17 11:07:51 [172.22.36.142.2.2] : 2004 Sep 17 11:17:39 pacific:
%AAA-6-AAA_ACCOUNTING_MESSAGE: update:22.214.171.124@pts/3:admin:configure terminal ; boot
system bootflash:/nexus-1000v-mzg.VSG1.1.bin (SUCCESS)
Troubleshooting with Logs
The Cisco VSG generates many types of system messages on the switch and sends them to a syslog server. These messages can be viewed to determine what events may have led up to the current problem condition that you are facing.
Use the following commands that are shown on the output to access and view logs in the Cisco VSG:
console Show console logging configuration
info Show logging configuration
internal syslog syslog internal information
last Show last few lines of logfile
level Show facility logging configuration
logfile Show contents of logfile
loopback Show logging loopback configuration
module Show module logging configuration
monitor Show monitor logging configuration
pending server address pending configuration
pending-diff server address pending configuration diff
server Show server logging configuration
session Show logging session status
status Show logging status
timestamp Show logging timestamp configuration
| Pipe command output to filter
For example, the show logging command output is as follows:
server severity: critical
Contacting Cisco Customer Support
If you are unable to solve a problem after using the troubleshooting suggestions in this guide, contact a customer service representative for assistance and further instructions. Before you call, have the following information ready to help your service provider assist you as quickly as possible:
•Version of the Cisco VSM/VSG and VNMC software
•Version of the ESX and vCenter Server software
•Contact phone number
•Brief description of the problem
•Brief explanation of the steps that you have already taken to isolate and resolve the problem
If you purchased the product and support contract from Cisco, contact Cisco for support. Cisco provides Layer 1, Layer 2, and Layer 3 support.
After you have collected this information, see the "Obtaining Documentation and Submitting a Service Request" section.
For more information about the steps to take before calling technical support, see the "Before Contacting Technical Support" section.