Cisco Nexus 7000 Series NX-OS Multicast Routing Command Reference
M Commands
Downloads: This chapterpdf (PDF - 77.0KB) The complete bookPDF (PDF - 7.54MB) | Feedback

M Commands

Table Of Contents

M Commands

mac address-table multicast


M Commands


This chapter describes the Cisco NX-OS multicast routing commands that begin with M.

mac address-table multicast

To configure an outgoing interface statically for a multicast MAC address, use the mac address-table multicast command.

mac address-table multicast multicast-mac-address vlan vlan-id interface interface-name

Syntax Description

multicast-mac-address

Specifies multicast MAC address.

vlan

Specifies the VLAN.

vlan-id

VLAN ID. The range is from 1 to 3967 and from 4048 to 4093.

interface

Specifies the interface.

interface-name

Interface name.


Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator
vdc-admin
vdc-operator

Command History

Release
Modification

5.2(1)

This command was introduced.


Usage Guidelines

This command does not require a license.

Examples

This example shows how to configure the specified outgoing interface statically for a multicast MAC address:

switch(config)# mac address-table multicast 01:00:5f:00:00:00 vlan 5 interface ethernet 
2/5
switch(config)#

Related Commands

Command
Description

show ip igmp snooping

mac-oif

Displays the IGMP snooping static MAC information.