The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
To apply a virtual device context (VDC) resource template to a VDC, use the template command.
template vdc-template-name
vdc-template-name |
VDC resource template name. |
None
VDC configuration
Release |
Modification |
---|---|
4.0(1) |
This command was introduced. |
You can use this command only in the default VDC (VDC 1).
This command does not require a license.
This example shows how to apply a resource template to a VDC:
switch# configure terminal switch(config)# vdc MyDevice switch(config-vdc)# template MyTemplate
Command |
Description |
---|---|
show vdc |
Displays VDC interface membership information. |
vdc |
Creates or specifies a VDC and enters VDC configuration mode. |