The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
To clear log Address Resolution Protocol (ARP) and Neighbor Discovery (ND) packets caching information, use the clear otv arp-nd command.
clear otv arp-nd
This command has no arguments or keywords.
None
Global configuration mode
Release |
Modification |
---|---|
5.0(3) |
This command was introduced. |
Note | IPv6 is not supported in this release. |
This command requires a Transport Services license.
This example shows how to clear log ARP/ND caching information:
switch(config)# clear otv arp-nd switch(config)#
Command |
Description |
---|---|
show otv isis |
Displays the IS-IS status and configuration. |
To clear the Intermediate System-to-Intermediate System (IS-IS) adjacency state, use the clear otv isis adjacency command.
clear otv isis adjacency [ * vpn { vpn-name | all } | overlay interface vpn { vpn-name | all } | system-id sid vpn { vpn-name | all } ]
* |
(Optional) Specifies IS-IS adjacencies on all interfaces. |
vpn |
(Optional) Specifies VPN information. |
vpn-name |
VPN name. The maximum length is 32 alphanumeric characters. |
all |
(Optional) Specifies all configured VPNs. |
overlay |
(Optional) Specifies an overlay interface. |
interface |
Overlay interface number. The range is from 0 to 65535. |
system-id |
(Optional) Specifies the hostname or the system ID. |
sid |
Hostname or system ID in the form of XXXX.XXXX.XXXX. |
None
Global configuration mode
Release |
Modification |
---|---|
5.0(3) |
This command was introduced. |
This command requires a Transport Services license.
This example shows how to clear counters and reset adjacencies with neighbors:
switch# clear otv isis adjacency * switch#
Command |
Description |
---|---|
show otv isis |
Displays the IS-IS status and configuration. |
To clear Overlay Transport Virtualization (OTV) Intermediate System-to-Intermediate System (IS-IS) protocol statistics, use the clear otv isis statistics command.
clear otv isis statistics [ * vpn { vpn-name | all } | overlay interface vpn { vpn-name | all } ]
* |
(Optional) Specifies IS-IS adjacencies on all interfaces. |
vpn |
(Optional) Specifies VPN information. |
vpn-name |
VPN name. The maximum length is 32 alphanumeric characters. |
all |
(Optional) Specifies all configured VPNs. |
overlay |
(Optional) Specifies an overlay interface. |
interface |
Overlay interface number. The range is from 0 to 65535. |
None
Global configuration mode
Release |
Modification |
---|---|
5.0(3) |
This command was introduced. |
This command requires a Transport Services license.
This example shows how to clear OTV IS-IS protocol statistics:
switch# clear otv isis statistics * switch#
Command |
Description |
---|---|
show otv isis |
Displays the IS-IS status and configuration. |
To clear Overlay Transport Virtualization (OTV) Intermediate System-to-Intermediate System (IS-IS) traffic information, use the clear otv isis traffic command.
clear otv isis traffic [ * vpn { vpn-name | all } | overlay interface vpn { vpn-name | all } ]
* |
(Optional) Specifies IS-IS adjacencies on all interfaces. |
vpn |
(Optional) Specifies VPN information. |
vpn-name |
VPN name. The maximum length is 32 alphanumeric characters. |
all |
(Optional) Specifies all configured VPNs. |
overlay |
(Optional) Specifies an overlay interface. |
interface |
Overlay interface number. The range is from 0 to 65535. |
vpn |
(Optional) Specifies VPN information. |
None
Global configuration mode
Release |
Modification |
---|---|
5.0(3) |
This command was introduced. |
This command requires a Transport Services license.
This example shows how to clear OTV IS-IS traffic information:
switch# clear otv isis traffic * switch#
Command |
Description |
---|---|
show otv isis |
Displays the IS-IS status and configuration. |
To clear an Overlay Transport Virtualization (OTV) route or MAC address table, use the clear otv route command.
clear otv route [ vlan-id | mac-address ]
vlan-id |
(Optional) VLAN ID. The range is from 1 to 3967 and from 4048 to 4093. |
mac-address |
(Optional) MAC address. |
None
Global configuration mode
Release |
Modification |
---|---|
5.0(2) |
This command was introduced. |
This command requires a Transport Services license.
This example shows how to clear an OTV route:
switch# clear otv route switch#
Command |
Description |
---|---|
show otv isis |
Displays the IS-IS status and configuration. |