Cisco Nexus 6000 Series NX-OS QoS Command Reference
D Commands
Downloads: This chapterpdf (PDF - 72.0KB) The complete bookPDF (PDF - 0.98MB) | Feedback

D Commands

Table Of Contents

D Commands

description


D Commands


This chapter describes the Cisco NX-OS quality of service (QoS) commands that begin with D.

description

To add a description to a class map, policy map, or table map, use the description command. To remove the description, use the no form of this command.

description text

no description text

Syntax Description

text

Description for the class map, policy map, or table map. The description can be a maximum of 200 alphanumeric characters.


Command Default

None

Command Modes

Class map type network qos configuration
Class map type qos configuration
Class map type queuing configuration
Policy map type network qos configuration
Policy map type qos configuration
Policy map type queuing configuration

Command History

Release
Modification

6.0(2)N1(1)

This command was introduced.


Examples

This example shows how to add a description to a qos class map:

switch(config)# class-map my_class1
switch(config-cmap-qos)# description This class map filters packets that matches an ACL
switch(config-cmap-qos)# 
 
   

Related Commands

Command
Description

class-map

Creates or modifies a class map.

policy-map

Creates or modifies a policy map.

show class-map

Displays class maps.

show policy-map

Displays policy maps.