The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 5500 Series NX-OS Unicast Routing Configuration Guide, Release 6.x. The latest version of this document is available at the following Cisco website:
http://www.cisco.com/en/US/products/ps9670/products_installation_and_configuration_guides_list.html
To check for additional information about Cisco NX-OS Release 6.x, see the Cisco Nexus 5500 Series NX-OS Release Notes, Release 6.0 available at the following Cisco website:
http://www.cisco.com/en/US/products/ps9670/prod_release_notes_list.html
Table 1 summarizes the new and changed features for the Cisco Nexus 5500 Series NX-OS Unicast Routing Configuration Guide, Release 6.x, and tells you where they are documented.
|
|
|
|
---|---|---|---|
This feature was introduced for OSPF, BGP, EIGRP, VRRP, HSRP, and Static Routes. |
For OSPFv2, see BFD, page 5-61 . For EIGRP, see BFD, page 7-143 . For Advanced BGP, see BFD, page 9-198 . For Static Routes, see BFD, page 11-253 . For HSRP, see BFD, page 17-317 . For VRRP, see BFD, page 19-349 . |
||
For BGP, EIGRP, and OSPF, the number of maximum paths that can be load-balanced to a destination in equal-cost multi-path (ECMP) routing has increased from 16 to 64. |
Load Balancing and Equal Cost Multipath, page 1-6 Configuring Optional Parameters on an OSPFv2 Instance, page 5-65 Creating an OSPFv3 Instance, page 6-108 |
||