Cisco Nexus 1000V Troubleshooting Guide, Release 4.2(1)SV1(5.1)
Port Profiles
Downloads: This chapterpdf (PDF - 217.0KB) The complete bookPDF (PDF - 6.9MB) | Feedback

Port Profiles

Table Of Contents

Port Profiles

Information About Port Profiles

Problems with Port Profiles

Recovering a Quarantined Offline Interface

Port Profile Logs

Port Profile Troubleshooting Commands


Port Profiles


This chapter describes how to identify and resolve problems with port profiles and includes the following topics:

Information About Port Profiles

Problems with Port Profiles

Port Profile Logs

Port Profile Troubleshooting Commands

Information About Port Profiles

Port profiles are used to configure interfaces. A port profile can be assigned to multiple interfaces giving them all the same configuration. Changes to the port profile are propagated automatically to the configuration of any interface assigned to it.

In the VMware vCenter Server, a port profile is represented as a port group. The vEthernet or Ethernet interfaces are assigned in vCenter Server to a port profile for:

Defining port configuration by policy.

Applying a single policy across a large number of ports.

Supporting both vEthernet and Ethernet ports.

vEthernet port profiles can be assigned by the server administrator to physical ports (a VMNIC or a PNIC). Port profiles not configured as vEthernet can be assigned to a VM virtual port.


Note While manual interface configuration overrides that of the port profile, it is not recommended. Manual interface configuration is only used, for example, to quickly test a change or allow a port to be disabled without having to change the inherited port profile.


For more information about assigning port profiles to physical or virtual ports, see your VMware documentation.

To verify that the profiles are assigned as expected to physical or virtual ports, use the following show commands:

show port-profile virtual usage

show running-config interface interface-id

To verify port profile inheritance, use the following command:

show running-config interface interface-id 


Note Inherited port profiles cannot be changed or removed from an interface from the Cisco Nexus 1000V CLI. This can only be done from vCenter Server.



Note Inherited port profiles are automatically configured by the Cisco Nexus 1000V when the ports are attached on the hosts. This is done by matching up the VMware port group assigned by the system administrator with the port profile that created it.


For detailed information about port profiles, see the Cisco Nexus 1000V Port Profile Configuration Guide, Release 4.2(1)SV1(5.1).

Problems with Port Profiles

The following are symptoms, possible causes, and solutions for problems with port profiles.

Table 9-1 Problems with Port Profiles  

Symptom
Possible Causes
Solution

You do not see the port group on vCenter Server or the following message is displayed:

Warning: Operation succeeded 
locally but update failed on 
vCenter server. Please check if 
you are connected to vCenter 
Server. 

The connection to vCenter server is down.

1. Verify that the connection to the vCenter Server is Enabled and Connected.

show svs connections

2. Reconnect to vCenter server.

For detailed instructions, see the Connecting to vCenter Server procedure in the Cisco Nexus 1000V System Management Configuration Guide, Release 4.2(1)SV1(5.1).

The domain configuration was not successfully pushed to vCenter server.

1. Verify that the domain configuration was successfully pushed to vCenter Server.

show svs domain

2. Fix any problems with the domain configuration.

For information about configuring the domain, see the Cisco Nexus 1000V System Management Configuration Guide, Release 4.2(1)SV1(5.1).

The port profile is configured incorrectly.

1. Verify that the vmware port-group is configured for the port profile and that the port profile is enabled.

show port profile name name

2. Fix the port profile using the procedures in the Cisco Nexus 1000V Port Profile Configuration Guide, Release 4.2(1)SV1(5.1).

A port configuration is not applied to an interface.

Management connectivity between the vCenter server and the VSM has prevented the port profile assignment from being sent or received.

1. Display the port profile usage by interface.

show port-profile virtual usage

2. Verify that the interface level configuration did not overwrite the port profile configuration.

show run

show port-profile expand-interface

3. If the show command output is incorrect, then on vCenter server, reassign the port group to the interface.

An Ethernet interface or vEthernet interface is administratively down.

A system message similar to the following is logged:

%VMS-3-DVPG_NICS_MOVED: '1' nics 
have been moved from port-group 
'Access483' to 
'Unused_Or_Quarantine_Veth'.

The interface is inheriting a quarantined port profile.

A configuration was not saved prior to rebooting the VSM, the configuration was lost, and the interfaces were moved to one of the following port profiles:

Unused_Or_Quarantine_Uplink
for ethernet types

Unused_Or_Quarantine_Veth for Vethernet types

1. Verify the port profile-to-interface mapping.

show port-profile virtual usage

2. Reassign the VMNIC or PNIC to a non-quarantined port group to enable the interface to be up and forwarding traffic. This requires changing the port group on vCenter Server.

After applying a port profile, an online interface is quarantined.

A system message similar to the following is logged:

%PORT-PROFILE-2-INTERFACE_QUARAN
TINED: Interface Ethernet3/3 has 
been quarantined due to Cache 
Overrun

The assigned port profile is incorrectly configured. The incorrect command fails when the port profile is applied to an interface.

Although a specific command fails, the port profile-to-interface mapping is created.

1. Identify the command that failed.

show accounting log | grep FAILURE

2. Verify the interface is quarantined.

show port-profile sync-status

3. Verify the port profile-to-interface mapping.

show port-profile virtual usage

4. Fix the error in the port profile using the procedures in the Cisco Nexus 1000V Port Profile Configuration Guide, Release 4.2(1)SV1(5.1).

5. Bring the interface out of quarantine.

no shutdown

The interface comes back online.

6. Return shutdown control to the port-profile.

default shutdown

After modifying a port profile, an assigned offline interface is quarantined.

A system message similar to the following is logged:

%PORT-PROFILE-2-INTERFACE_QUARAN
TINED: Interface Ethernet4/3 has 
been quarantined due to Cache 
Overrun

The interface has been removed from the DVS.

To bring the interface back online:, use the "Recovering a Quarantined Offline Interface" procedure.

A module and all associated interfaces are offline.

A system message similar to the following is logged:

2011 Mar 2 22:28:50 n1000v 
%VEM_MGR-2-VEM_MGR_REMOVE_NO_HB: 
Removing VEM 3 (heartbeats lost)
2011 Mar 2 22:29:00 n1000v 
%VEM_MGR-2-MOD_OFFLINE: Module 3 
is offline

The interface carrying system VLANs for the module has gone down for one of the following reasons:

System interfaces were removed from the DVS on the vCenter Server.

The module was powered down.

There is general loss of connectivity to the module.

Follow VEM troubleshooting guide to bring module back online

To bring the interface back online, use the "Recovering a Quarantined Offline Interface" procedure.


Recovering a Quarantined Offline Interface

You can use this procedure to recover and bring online an interface that is offline and has been quarantined.

BEFORE YOU BEGIN

Before beginning this procedure, you must know or do the following:

You are logged in to the CLI in EXEC mode.

DETAILED STEPS


Step 1 Verify the interface has is quarantined. The interface appears in the show command output.

show port-profile sync-status

Step 2 On the vCenter server, add or associate the PNIC to a port profile (either the original port profile or a different port profile).

The interface comes back online.

Step 3 Verify that the interface has come back online.

show interface brief

Step 4 Verify the port profile-to-interface mapping.

show port-profile virtual usage

Step 5 Verify the interface has come out of quarantine automatically. The interface should no longer appear in the show command output.

show port-profile sync-status

Step 6 Return shutdown control to the port-profile.

default shutdown


Port Profile Logs

To enable and collect detailed logs for port profiles, use the following commands:

debug port-profile trace

debug port-profile error

debug port-profile all

debug msp all

After enabling the debug log, the results of any subsequent port profile configuration are captured in the log file.

Port Profile Troubleshooting Commands

You can use the commands in this section to troubleshoot problems related to port profiles.

Command
Purpose

show port-profile

Displays the port profile configuration.

See Example 9-1.

show port-profile name name

Displays the configuration for a named port profile.

See Example 9-2.

show port-profile brief

Displays tabular view of all configured port profiles.

See Example 9-3.

show port-profile expand-interface

Displays all configured port profiles expanded to include the interfaces assigned to them.

See Example 9-4.

show port-profile expand-interface name name

Displays a named port profile expanded to include the interfaces assigned to it.

See Example 9-5.

show port-profile-role [name port-profile-role-name]

Displays the port profile role configuration, including role names, descriptions, assigned users, and assigned groups.

See Example 9-7.

show running-config port-profile [profile-name]

Displays the port profile configuration.

See Example 9-6.

show port-profile-role

Displays the port profile role configuration.

See Example 9-7.

show port-profile-role users

Displays available users and groups.

See Example 9-8.

show port-profile sync-status [interface if-name]

Displays interfaces that are out of sync with the port profile.

See Example 9-9.

show port-profile virtual usage [name profile-name]

Displays the port profile usage by interface.

See Example 9-10.

show msp internal info

Displays port profile mappings on vCenter server and configured roles.

See Example 9-11

show system internal port-profile profile-fsm

Displays port profile activity on the Cisco Nexus 1000V, including transitions such as inherits and configurations. If the following displays, then all inherits are processed:

Curr state: [PPM_PROFILE_ST_SIDLE]

See Example 9-12

show system internal port-profile event-history msgs

Displays the messages logged about port profile events within the Cisco Nexus 1000V.

See Example 9-13


For detailed information about show command output, see the Cisco Nexus 1000V Command Reference, Release 4.2(1)SV1(5.1).

EXAMPLES

Example 9-1 show port-profile

n1000v# show port-profile
port-profile vEthProfile1
  description:
  type: vethernet
  status: disabled
  capability l3control: no
  pinning control-vlan: -
  pinning packet-vlan: -
  system vlans: none
  port-group:
  max ports: 32
  inherit:
  config attributes:
    channel-group auto mode on mac-pinning
  evaluated config attributes:
    channel-group auto mode on mac-pinning
  assigned interfaces:
port-profile vEthProfile2
  description:
  type: vethernet
  status: disabled
  capability l3control: no
  pinning control-vlan: -
  pinning packet-vlan: -
  system vlans: none
  port-group:
  max ports: 32
  inherit:
  config attributes:
    channel-group auto mode on sub-group cdp
  evaluated config attributes:
    channel-group auto mode on sub-group cdp
  assigned interfaces:
port-profile vEthProfile3
  description:
  type: vethernet
  status: disabled
  capability l3control: no
  pinning control-vlan: -
  pinning packet-vlan: -
  system vlans: none
  port-group:
  max ports: 32
  inherit:
  config attributes:
    channel-group auto mode on sub-group manual
  evaluated config attributes:
    channel-group auto mode on sub-group manual
  assigned interfaces:n1000v#

Example 9-2 show port-profile name

n1000v# show port-profile name vEthProfile3
port-profile vEthProfile3
  description:
  type: vethernet
  status: disabled
  capability l3control: no
  pinning control-vlan: -
  pinning packet-vlan: -
  system vlans: none
  port-group:
  max ports: 32
  inherit:
  config attributes:
    channel-group auto mode on sub-group manual
  evaluated config attributes:
    channel-group auto mode on sub-group manual
  assigned interfaces:
n1000v#

Example 9-3 show port-profile brief

n1000v# show port-profile brief
--------------------------------------------------------------------------------
Port                          Profile    Profile  Conf   Eval    Assigned  Child 
Profile                       Type       State    Items  Items   Intfs     Profs 
--------------------------------------------------------------------------------
AccessProf                    Vethernet  0        0      0       0         0     
PP1027                        Vethernet  1        0      0       0         0     
PP1028                        Vethernet  1        0      0       0         0     
Unused_Or_Quarantine_Uplink   Ethernet   1        1      0       0         0     
Unused_Or_Quarantine_Veth     Vethernet  1        1      0       0         0     
accessprof                    Vethernet  0        3      3       0         0     
portp1                        Vethernet  0        0      0       0         0     
--------------------------------------------------------------------------------
Profile    Total 
Type       Intfs 
--------------------------------------------------------------------------------
Vethernet  8 
Ethernet   10 
n1000v#

Example 9-4 show port-profile expand-interface

n1000v# show port-profile expand-interface
port-profile AccessProf
  id: 1
  capability: 0x0
  state: 0x0
  type: 0x0
  system vlan mode: -
  system vlans: 
  port-binding: static
  bind_opts: 0
  max ports: 32
  min ports: 32
  used ports: 0
  vmware config information
    pg name: AccessProf
    dvs:  (ignore)
    reserved ports: 32
  port-profile role: 
  alias information:
port-profile PP1027
  id: 4
  capability: 0x0
  state: 0x1
  type: 0x1
  system vlan mode: -
  system vlans: 
  port-binding: static
  bind_opts: 1
  max ports: 64
  min ports: 32
  used ports: 0
  vmware config information
    pg name: PP1027
    dvs:  (ignore)
    reserved ports: 16
  port-profile role: 
  alias information:
    pg id: PP1027
    dvs uuid: 
    type: 1
    pg id: dvportgroup-3180
    dvs uuid: 12 98 0e 50 6b 78 6f c5-74 af b2 3a 16 6e 45 10
    type: 2
port-profile PP1028
  id: 3
  capability: 0x0
  state: 0x1
  type: 0x1
  system vlan mode: -
  system vlans: 
  port-binding: dynamic
  bind_opts: 1
  max ports: 64
  min ports: 32
  used ports: 0
  vmware config information
    pg name: PP1028
    dvs:  (ignore)
    reserved ports: 16
  port-profile role: 
  alias information:
    pg id: PP1028
    dvs uuid: 
    type: 1
    pg id: dvportgroup-3181
    dvs uuid: 12 98 0e 50 6b 78 6f c5-74 af b2 3a 16 6e 45 10
    type: 2
port-profile Unused_Or_Quarantine_Uplink
  id: 6
  capability: 0x1
  state: 0x1
  type: 0x1
  system vlan mode: -
  system vlans: 
  port-binding: dynamic
  bind_opts: 1
  max ports: 32
  min ports: 32
  used ports: 0
  vmware config information
    pg name: Unused_Or_Quarantine_Uplink
    dvs:  (ignore)
    reserved ports: 0
  port-profile role: 
  alias information:
    pg id: Unused_Or_Quarantine_Uplink
    dvs uuid: 
    type: 1
    pg id: dvportgroup-3182
    dvs uuid: 12 98 0e 50 6b 78 6f c5-74 af b2 3a 16 6e 45 10
    type: 2
port-profile Unused_Or_Quarantine_Veth
  id: 7
  capability: 0x0
  state: 0x1
  type: 0x1
  system vlan mode: -
  system vlans: 
  port-binding: dynamic
  bind_opts: 1
  max ports: 32
  min ports: 32
  used ports: 0
  vmware config information
    pg name: Unused_Or_Quarantine_Veth
    dvs:  (ignore)
    reserved ports: 32
  port-profile role: 
  alias information:
    pg id: Unused_Or_Quarantine_Veth
    dvs uuid: 
    type: 1
    pg id: dvportgroup-3183
    dvs uuid: 12 98 0e 50 6b 78 6f c5-74 af b2 3a 16 6e 45 10
    type: 2
port-profile accessprof
  id: 5
  capability: 0x0
  state: 0x0
  type: 0x1
  system vlan mode: -
  system vlans: 
  port-binding: dynamic
  bind_opts: 1
  max ports: 32
  min ports: 32
  used ports: 0
  vmware config information
    pg name: accessprof
    dvs:  (ignore)
    reserved ports: 32
  port-profile role: 
  alias information:
    pg id: accessprof
    dvs uuid: 
    type: 1
port-profile portp1
  id: 2
  capability: 0x0
  state: 0x0
  type: 0x0
  system vlan mode: -
  system vlans: 
  port-binding: static
  bind_opts: 0
  max ports: 32
  min ports: 32
  used ports: 0
  vmware config information
    pg name: portp1
    dvs:  (ignore)
    reserved ports: 32
  port-profile role: 
  alias information:
pending binds:
n1000v#

Example 9-5 show port-profile expand-interface name UplinkProfile1

n1000v# show port-profile expand-interface name UplinkProfile1
port-profile EthProfile1
Ethernet2/2
    switchport mode trunk
    switchport trunk allowed vlan 110-119
    no shutdown
n1000v#

Example 9-6 show running-config port-profile

n1000v# show running-config port-profile
port-profile type ethernet UplinkProfile1
  description "Profile for critical system ports"
  vmware port-group
  switchport mode access
  switchport access vlan 113
  switchport trunk native vlan 113
  channel-group auto mode on
  no shutdown
port-profile type vethernet vEthProfile2
  vmware port-group
  vmware max-ports 5
  switchport mode trunk
  switchport trunk native vlan 112
  channel-group auto mode on sub-group cdp
  no shutdown
n1000v#

Example 9-7 show port-profile-role

n1000v# show port-profile-role name adminUser

 
   
Name: adminUser
Description: adminOnly
Users:
    hdbaar (user)
Assigned port-profiles:
    allaccess2
n1000v# 

Example 9-8 show port-profile-role users

switch# show port-profile-role users

Groups:

Administrators

TestGroupB

Users:

hdbaar

fgreen

suchen

mariofr

switch#

Example 9-9 show port-profile sync-status

n1000v# show port-profile sync-status interface ethernet 3/2

Ethernet3/2

port-profile: uplink

interface status: quarantine

sync status: out of sync

cached commands:

errors:

command cache overrun

recovery steps:

bring interface online

n1000v#

Example 9-10 show port-profile virtual usage

n1000v# show port-profile virtual usage
-------------------------------------------------------------------------------
Port Profile               Port        Adapter        Owner
-------------------------------------------------------------------------------
n1kv-uplink0               Po1
                           Eth3/2      vmnic1         localhost.
                           Eth3/3      vmnic2         localhost.
vlan1767                   Veth7       Net Adapter 1  all-tool-7
                           Veth8       Net Adapter 1  all-tool-8
aipc1765                   Veth4       Net Adapter 1  bl-h-s
inband1766                 Veth6       Net Adapter 3  bl-h-s
mgmt1764                   Veth5       Net Adapter 2  bl-h-s
vpc-mac-uplink             Po7
                           Eth5/2      vmnic1         localhost.
                           Eth5/3      vmnic2         localhost.
ch-vpc-mac-uplink          Po2
                           Po3
                           Eth4/2      vmnic1         VDANIKLNCOS
                           Eth4/3      vmnic2         VDANIKLNCOS
ch-aipc1765                Veth1       Net Adapter 1  bl-h-p
ch-mgmt1764                Veth2       Net Adapter 2  bl-h-p
ch-inband1766              Veth3       Net Adapter 3  bl-h-p
n1000v#

Example 9-11 show msp internal info

n1000v# show msp internal info
port-profile Access484
  id: 5
  capability: 0x0
  state: 0x1
  type: 0x1
  system vlan mode: -
  system vlans: 
  port-binding: static
  max ports: 256
  vmware config information
    pg name: Access484
    dvs:  (ignore)
  port-profile role: 
  alias information:
    pg id: Access484
    dvs uuid: 
    type: 1
    pg id: dvportgroup-3285
    dvs uuid: 44 dc 3b 50 53 11 b7 ac-ef ed ef 46 ee df c2 d5
    type: 2
    pg id: dvportgroup-3292
    dvs uuid: 44 dc 3b 50 53 11 b7 ac-ef ed ef 46 ee df c2 d5
    type: 2
port-profile Unused_Or_Quarantine_Uplink
  id: 1
  capability: 0x1
  state: 0x1
  type: 0x1
  system vlan mode: -
  system vlans: 
  port-binding: static
  max ports: 32
  vmware config information
    pg name: Unused_Or_Quarantine_Uplink
    dvs:  (ignore)
  port-profile role: 
  alias information:
    pg id: Unused_Or_Quarantine_Uplink
    dvs uuid: 
    type: 1
    pg id: dvportgroup-2444
    dvs uuid: 44 dc 3b 50 53 11 b7 ac-ef ed ef 46 ee df c2 d5
    type: 2
port-profile Unused_Or_Quarantine_Veth
  id: 2
  capability: 0x0
  state: 0x1
  type: 0x1
  system vlan mode: -
  system vlans: 
  port-binding: static
  max ports: 32
  vmware config information
    pg name: Unused_Or_Quarantine_Veth
    dvs:  (ignore)
  port-profile role: 
  alias information:
    pg id: Unused_Or_Quarantine_Veth
    dvs uuid: 
    type: 1
    pg id: dvportgroup-2445
    dvs uuid: 44 dc 3b 50 53 11 b7 ac-ef ed ef 46 ee df c2 d5
    type: 2
port-profile eth-break-deinherit
  id: 10
  capability: 0x1
  state: 0x1
  type: 0x1
  system vlan mode: -
  system vlans: 
  port-binding: static
  max ports: 32
  vmware config information
    pg name: eth-break-deinherit
    dvs:  (ignore)
  port-profile role: 
  alias information:
    pg id: eth-break-deinherit
    dvs uuid: 
    type: 1
    pg id: dvportgroup-3286
    dvs uuid: 44 dc 3b 50 53 11 b7 ac-ef ed ef 46 ee df c2 d5
    type: 2
    pg id: dvportgroup-3293
    dvs uuid: 44 dc 3b 50 53 11 b7 ac-ef ed ef 46 ee df c2 d5
    type: 2
port-profile eth-break-inherit
  id: 9
  capability: 0x1
  state: 0x1
  type: 0x1
  system vlan mode: -
  system vlans: 
  port-binding: static
  max ports: 32
  vmware config information
    pg name: eth-break-inherit
    dvs:  (ignore)
  port-profile role: 
  alias information:
    pg id: eth-break-inherit
    dvs uuid: 
    type: 1
    pg id: dvportgroup-3287
    dvs uuid: 44 dc 3b 50 53 11 b7 ac-ef ed ef 46 ee df c2 d5
    type: 2
    pg id: dvportgroup-3294
    dvs uuid: 44 dc 3b 50 53 11 b7 ac-ef ed ef 46 ee df c2 d5
    type: 2
port-profile uplink
  id: 3
  capability: 0x3
  state: 0x1
  type: 0x1
  system vlan mode: trunk
  system vlans: 480-481
  port-binding: static
  max ports: 32
  vmware config information
    pg name: uplink
    dvs:  (ignore)
  port-profile role: 
  alias information:
    pg id: uplink
    dvs uuid: 
    type: 1
    pg id: dvportgroup-3283
    dvs uuid: 44 dc 3b 50 53 11 b7 ac-ef ed ef 46 ee df c2 d5
    type: 2
port-profile uplink-quar
  id: 12
  capability: 0x1
  state: 0x1
  type: 0x1
  system vlan mode: -
  system vlans: 
  port-binding: static
  max ports: 32
  vmware config information
    pg name: uplink-quar
    dvs:  (ignore)
  port-profile role: 
  alias information:
    pg id: uplink-quar
    dvs uuid: 
    type: 1
    pg id: dvportgroup-3288
    dvs uuid: 44 dc 3b 50 53 11 b7 ac-ef ed ef 46 ee df c2 d5
    type: 2
    pg id: dvportgroup-3295
    dvs uuid: 44 dc 3b 50 53 11 b7 ac-ef ed ef 46 ee df c2 d5
    type: 2
port-profile veth-break-deinherit
  id: 8
  capability: 0x0
  state: 0x1
  type: 0x1
  system vlan mode: -
  system vlans: 
  port-binding: static
  max ports: 256
  vmware config information
    pg name: veth-break-deinherit
    dvs:  (ignore)
  port-profile role: 
  alias information:
    pg id: veth-break-deinherit
    dvs uuid: 
    type: 1
    pg id: dvportgroup-3289
    dvs uuid: 44 dc 3b 50 53 11 b7 ac-ef ed ef 46 ee df c2 d5
    type: 2
    pg id: dvportgroup-3296
    dvs uuid: 44 dc 3b 50 53 11 b7 ac-ef ed ef 46 ee df c2 d5
    type: 2
port-profile veth-break-inherit
  id: 7
  capability: 0x0
  state: 0x1
  type: 0x1
  system vlan mode: -
  system vlans: 
  port-binding: static
  max ports: 256
  vmware config information
    pg name: veth-break-inherit
    dvs:  (ignore)
  port-profile role: 
  alias information:
    pg id: veth-break-inherit
    dvs uuid: 
    type: 1
    pg id: dvportgroup-3290
    dvs uuid: 44 dc 3b 50 53 11 b7 ac-ef ed ef 46 ee df c2 d5
    type: 2
    pg id: dvportgroup-3297
    dvs uuid: 44 dc 3b 50 53 11 b7 ac-ef ed ef 46 ee df c2 d5
    type: 2
port-profile vpc-uplink
  id: 6
  capability: 0x3
  state: 0x1
  type: 0x1
  system vlan mode: trunk
  system vlans: 480-481
  port-binding: static
  max ports: 32
  vmware config information
    pg name: vpc-uplink
    dvs:  (ignore)
  port-profile role: 
  alias information:
    pg id: vpc-uplink
    dvs uuid: 
    type: 1
    pg id: dvportgroup-3291
    dvs uuid: 44 dc 3b 50 53 11 b7 ac-ef ed ef 46 ee df c2 d5
    type: 2
    pg id: dvportgroup-3298
    dvs uuid: 44 dc 3b 50 53 11 b7 ac-ef ed ef 46 ee df c2 d5
    type: 2
pending binds:
port-profile-role adfd
  id: 0
  desc: 
  num users: 1
    group GROUP
 
   
n1000v# 

Example 9-12 show system internal port-profile profile-fsm

n1000v# show system internal port-profile profile-fsm
>>>>FSM: <PROFILE_FSM:1> has 4 logged transitions<<<<<
 
   
1) FSM:<PROFILE_FSM:1> Transition at 856903 usecs after Tue Mar  8 19:11:47 2011
    Previous state: [PPM_PROFILE_ST_SIDLE]
    Triggered event: [PPM_PROFILE_EV_EIF_STATUS_CHANGE]
    Next state: [PPM_PROFILE_ST_SIDLE]
 
   
2) FSM:<PROFILE_FSM:1> Transition at 858442 usecs after Tue Mar  8 19:11:47 2011
    Previous state: [PPM_PROFILE_ST_SIDLE]
    Triggered event: [PPM_PROFILE_EV_ELEARN]
    Next state: [PPM_PROFILE_ST_SIF_CREATE]
 
   
3) FSM:<PROFILE_FSM:1> Transition at 842710 usecs after Tue Mar  8 19:12:04 2011
    Previous state: [PPM_PROFILE_ST_SIF_CREATE]
    Triggered event: [PPM_PROFILE_EV_EACKNOWLEDGE]
    Next state: [FSM_ST_NO_CHANGE]
 
   
4) FSM:<PROFILE_FSM:1> Transition at 873872 usecs after Tue Mar  8 19:12:04 2011
    Previous state: [PPM_PROFILE_ST_SIF_CREATE]
    Triggered event: [PPM_PROFILE_EV_ESUCCESS]
    Next state: [PPM_PROFILE_ST_SIDLE]
 
   
    Curr state: [PPM_PROFILE_ST_SIDLE]
n1000v#

Example 9-13 show system internal port-profile event-history msgs

n1000v# show system internal port-profile event-history msgs
1) Event:E_MTS_RX, length:60, at 538337 usecs after Tue Mar  8 19:13:02 2011
    [NOT] Opc:MTS_OPC_IM_IF_CREATED(62467), Id:0X0000B814, Ret:SUCCESS
    Src:0x00000101/175, Dst:0x00000101/0, Flags:None
    HA_SEQNO:0X00000000, RRtoken:0x00000000, Sync:UNKNOWN, Payloadsize:120
    Payload:    
    0x0000:  00 00 00 02 00 00 00 02 00 00 00 0c 00 00 00 29 
 
   
2) Event:E_MTS_RX, length:60, at 515030 usecs after Tue Mar  8 19:13:02 2011
    [NOT] Opc:MTS_OPC_LC_ONLINE(1084), Id:0X0000B7E8, Ret:SUCCESS
    Src:0x00000101/744, Dst:0x00000101/0, Flags:None
    HA_SEQNO:0X00000000, RRtoken:0x00000000, Sync:UNKNOWN, Payloadsize:234
    Payload:    
    0x0000:  02 00 00 03 00 00 00 00 00 00 03 02 03 02 00 00 
 
   
3) Event:E_MTS_RX, length:60, at 624319 usecs after Tue Mar  8 19:12:05 2011
    [NOT] Opc:MTS_OPC_PPM_INTERFACE_UPDATE(152601), Id:0X00003908, Ret:SUCCESS
    Src:0x00000101/489, Dst:0x00000101/0, Flags:None
    HA_SEQNO:0X00000000, RRtoken:0x00000000, Sync:UNKNOWN, Payloadsize:107
    Payload:    
    0x0000:  00 00 00 02 00 00 00 02 00 00 00 0c 00 00 00 26 
 
   
4) Event:E_MTS_RX, length:60, at 624180 usecs after Tue Mar  8 19:12:05 2011
    [NOT] Opc:MTS_OPC_PPM_INTERFACE_UPDATE(152601), Id:0X00003905, Ret:SUCCESS
    Src:0x00000101/489, Dst:0x00000101/0, Flags:None
    HA_SEQNO:0X00000000, RRtoken:0x00000000, Sync:UNKNOWN, Payloadsize:107
    Payload:    
    0x0000:  00 00 00 02 00 00 00 02 00 00 00 0c 00 00 00 26 
 
   
5) Event:E_MTS_RX, length:60, at 624041 usecs after Tue Mar  8 19:12:05 2011
    [NOT] Opc:MTS_OPC_PPM_INTERFACE_UPDATE(152601), Id:0X00003903, Ret:SUCCESS
    Src:0x00000101/489, Dst:0x00000101/0, Flags:None
    HA_SEQNO:0X00000000, RRtoken:0x00000000, Sync:UNKNOWN, Payloadsize:107
    Payload:    
    0x0000:  00 00 00 02 00 00 00 02 00 00 00 0c 00 00 00 26 
...