Cisco Nexus 1000V System Management Configuration Guide, Release 4.2(1) SV1(4)
New and Changed Information
Downloads: This chapterpdf (PDF - 75.0KB) The complete bookPDF (PDF - 2.25MB) | Feedback

New and Changed Information

Table Of Contents

New and Changed Information


New and Changed Information


This chapter lists new and changed content by release, and where it is located in this document.

Content
Description
Changed in Release
Where Documented

Enable NetFlow feature

You can enable/disable the NetFlow feature.

4.2(1)SV1(4)

"Configuring NetFlow"

Add port profile as Local SPAN source

You can specify a port profile as a source for Local SPAN monitor traffic.

4.2(1)SV1(4)

"Configuring Local SPAN and ERSPAN"

Add port profile as ERSPAN source

You can specify a port profile as a source for ERSPAN monitor traffic.

4.2(1)SV1(4)

"Configuring Local SPAN and ERSPAN"

Hardware iSCSI Multipath

You can use a hardware iSCSI adapter for multipathing.

4.2(1)SV1(4)

"Configuring iSCSI Multipath"

SNMP MIBs added

List of supported MIBs.

4.2(1)SV1(4)

"MIBs"

Network Analysis Module (NAM)

NAM support for NetFlow data sources

4.0(4)SV1(3)

"Configuring NetFlow"

NAM support for ERSPAN data sources

4.0(4)SV1(3)

"Configuring Local SPAN and ERSPAN"

ERSPAN Type-III header

The ERSPAN Type-III extended format header frame enhances support for network management, intrusion detection, and lawful intercept.

4.0(4)SV1(3)

"Configuring Local SPAN and ERSPAN"

Layer 3 Control

Allows a VSM to be Layer 3 accessible and control hosts that reside in a separate Layer 2 network.

4.0(4)SV1(2)

"Configuring the Domain"

iSCSI Multipath

Allows multiple routes between a server and its storage devices.

4.0(4)SV1(2)

"Configuring iSCSI Multipath"

Recommended Reading

Lists reading recommended before configuring the Cisco Nexus 1000V.

4.0(4)SV1(2)

"Preface"

Configuration Limits

Lists the configuration limits for the Cisco Nexus 1000V.

4.0(4)SV1(2)