Cisco Nexus 1010 Command Reference, Release 4.2(1)SP1(4)
G Commands
Downloads: This chapterpdf (PDF - 99.0KB) The complete bookPDF (PDF - 5.05MB) | Feedback

Table of Contents

G Commands

gunzip

gzip

G Commands

This chapter describes the Cisco Nexus 1010 commands that begin with the letter G.

gunzip

To uncompress a compressed file, use the gunzip command.

gunzip filename

 
Syntax Description

filename

Name of a file. The filename is case sensitive.

 
Defaults

None

 
Command Modes

Any command mode

 
Supported User Roles

network-admin

 
Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.

 
Usage Guidelines

The compressed filename must have the .gz extension.

You do not have to enter the .gz extension as part of the filename.

The Cisco NX-OS software uses Lempel-Ziv 1977 (LZ77) coding for compression.

Examples

This example shows how to uncompress a compressed file:

n1010# gunzip run_cnfg.cfg
 

 
Related Commands

Command
Description

dir

Displays the directory contents.

gzip

Compresses a file.

gzip

To compress a file, use the gzip command.

gzip filename

 
Syntax Description

filename

Name of a file. The filename is case sensitive.

 
Defaults

None

 
Command Modes

Any command mode

 
Supported User Roles

network-admin

 
Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.

 
Usage Guidelines

After you use this command, the file is replaced with the compressed filename that has the .gz extension.

The Cisco NX-OS software uses Lempel-Ziv 1977 (LZ77) coding for compression.

Examples

This example shows how to compress a file:

n1010# gzip run_cnfg.cfg
 

 
Related Commands

Command
Description

dir

Displays the directory contents.

gunzip

Uncompresses a compressed file.