The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This document describes the Quality of Service feature that prevents traffic congestion in your network and how to configure it.
This section describes the audience, organization, and conventions used in this document and describes how to obtain related documentation.
This guide is for network administrators with the following experience and knowledge:
Note Knowledge of VMware vNetwork Distributed Switch is not a prerequisite.
This publication is organized as follows:
|
|
---|---|
Provides an overview of QoS features and lists supported RFPs. |
|
Provides the DSCP and precedence values used in QoS class maps and policy maps. |
|
This publication uses the following conventions:
Command descriptions use these conventions:
Alternative, mutually exclusive elements are separated by vertical bars. |
Screen examples use these conventions:
Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the manual.
Before configuring this feature in the Cisco Nexus 1000V, we recommend that you read and become familiar with the following documentation: