Cisco Nexus 1010 Command Reference, Release 4.0(4)SP1(1)
Show Commands
Downloads: This chapterpdf (PDF - 610.0KB) The complete bookPDF (PDF - 4.74MB) | Feedback

Show Commands

Table Of Contents

Show Commands

show aaa accounting

show aaa authentication

show aaa groups

show accounting log

show banner motd

show boot

show cdp

show cdp neighbors

show cli variables

show cores

show file

show interface brief

show interface capabilities

show interface counters trunk

show interface status

show logging logfile

show logging module

show logging server

show logging timestamp

show module

show network

show ntp peer-status

show ntp peers

show ntp statistics

show password strength-check

show processes

show running-config diff

show running-config interface ethernet

show running-config interface port-channel

show snmp

show ssh key

show ssh server

show startup-config aaa

show startup-config security

show svs domain

show svs neighbors

show svs domain

show system resources

show tacacs-server

show tcp client

show tcp connection

show tcp statistics

show tech-support

show telnet server

show terminal

show user-account

show users

show version

show version image

show virtual-service-blade

show virtual-service-blade-type summary

show virtual-service-domain brief

show virtual-service-domain interface

show virtual-service-domain name

show xml server status


Show Commands


This chapter describes the Cisco Nexus 1010 show commands.

show aaa accounting

To display the AAA accounting configuration, use the show aaa accounting command.

show aaa accounting

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display the accounting configuration:

switch# show aaa accounting
         default: local
switch# 

Related Commands

Command
Description

show aaa groups

Displays the configured AAA server groups.

show aaa authentication

Displays the configuration for AAA authentication.


show aaa authentication

To display the configuration for AAA authentication, use the show aaa authentication command.

show aaa authentication [login error-enable | login mschap]

Syntax Description

login error-enable

(Optional) Displays the authentication login error message enable configuration.

login mschap

(Optional) Displays the authentication login MS-CHAP enable configuration.


Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display the configured authentication parameters:

switch# show aaa authentication
         default: local
         console: local
 
   

This example shows how to display the authentication-login error-enable configuration:

switch# show aaa authentication login error-enable
disabled
 
   

This example shows how to display the authentication-login MSCHAP configuration:

switch# show aaa authentication login mschap
disabled

Related Commands

Command
Description

show aaa accounting

Displays the AAA accounting configuration.

show aaa groups

Displays the configured AAA server groups.


show aaa groups

To display the configured AAA server groups, use the show aaa groups command.

show aaa groups

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display AAA group information:

switch# show aaa groups
TacServer

Related Commands

Command
Description

show aaa accounting

Displays the AAA accounting configuration.

show aaa authentication

Displays the configuration for AAA authentication.


show accounting log

To display the accounting log contents, use the show accounting log command.

show accounting log [size] [start-time year month day HH:MM:SS]

Syntax Description

size

(Optional) Size of the log to display in bytes. The range is from 0 to 250000.

start-time year month day HH:MM:SS

(Optional) Specifies a start time as follows.

The year is shown in the yyyy format, such as 2009.

The month is shown in the three-letter English abbreviation, such as Feb.

The day of the month is shown as a number from 1 to 31.

Hours, minutes, and seconds are shown in the standard 24-hour format, such as 16:00:00.


Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display the entire accounting log:

switch# show accounting log 
Wed Jul 22 02:09:44 2009:update:vsh.3286:root:configure terminal ; port-profile Unused_O
r_Quarantine_Uplink ; capability uplink (SUCCESS)
Wed Jul 22 07:57:50 2009:update:171.71.55.185@pts/2:admin:configure terminal ; flow reco
rd newflowrecord (SUCCESS)
Wed Jul 22 08:48:57 2009:start:swordfish-build1.cisco.com@pts:admin:
Wed Jul 22 08:49:03 2009:stop:swordfish-build1.cisco.com@pts:admin:shell terminated grac
efully
Wed Jul 22 08:50:36 2009:update:171.71.55.185@pts/2:admin:configure terminal ; no flow r
ecord newflowrecord (SUCCESS)
Thu Jul 23 07:21:50 2009:update:vsh.29016:root:configure terminal ; port-profile Unused_
Or_Quarantine_Veth ; state enabled (SUCCESS)
Thu Jul 23 10:25:19 2009:start:171.71.55.185@pts/5:admin:
Thu Jul 23 11:07:37 2009:update:171.71.55.185@pts/5:admin:enabled aaa user default role 
enabled/disabled
doc-switch(config)# 
 
   

This example shows how to display 400 bytes of the accounting log:

switch# show accounting log 400
 
   
Sat Feb 16 21:15:24 2008:update:/dev/pts/1_172.28.254.254:admin:show accounting log 
start-time 2008 Feb 16 18:31:21
Sat Feb 16 21:15:25 2008:update:/dev/pts/1_172.28.254.254:admin:show system uptime
Sat Feb 16 21:15:26 2008:update:/dev/pts/1_172.28.254.254:admin:show clock
 
   

This example shows how to display the accounting log starting at 16:00:00 on February 16, 2008:

switch(config)# show accounting log start-time 2008 Feb 16 16:00:00
 
   
Sat Feb 16 16:00:18 2008:update:/dev/pts/1_172.28.254.254:admin:show logging log file 
start-time 2008 Feb 16 15:59:16
Sat Feb 16 16:00:26 2008:update:/dev/pts/1_172.28.254.254:admin:show accounting log 
start-time 2008 Feb 16 12:05:16
Sat Feb 16 16:00:27 2008:update:/dev/pts/1_172.28.254.254:admin:show system uptime
Sat Feb 16 16:00:28 2008:update:/dev/pts/1_172.28.254.254:admin:show clock
Sat Feb 16 16:01:18 2008:update:/dev/pts/1_172.28.254.254:admin:show logging log file 
start-time 2008 Feb 16 16:00:16
Sat Feb 16 16:01:26 2008:update:/dev/pts/1_172.28.254.254:admin:show accounting log 
start-time 2008 Feb 16 12:05:16
Sat Feb 16 16:01:27 2008:update:/dev/pts/1_172.28.254.254:admin:show system uptime
Sat Feb 16 16:01:29 2008:update:/dev/pts/1_172.28.254.254:admin:show clock
Sat Feb 16 16:02:18 2008:update:/dev/pts/1_172.28.254.254:admin:show logging log file 
start-time 2008 Feb 16 16:01:16
Sat Feb 16 16:02:26 2008:update:/dev/pts/1_172.28.254.254:admin:show accounting log 
start-time 2008 Feb 16 12:05:16
Sat Feb 16 16:02:28 2008:update:/dev/pts/1_172.28.254.254:admin:show system uptime
 
   

Related Commands

Command
Description

clear accounting log

Clears the accounting log.


show banner motd

To display the configured banner message, use the show banner motd command.

show banner motd

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display the configured banner message:

switch(config)# show banner motd
April 16, 2008 Welcome to the Switch

Related Commands

Command
Description

banner motd

Configures the banner message of the day.

switchname

Changes the switch prompt.


show boot

To display the system and kickstart boot variables for verification, use the show boot command.

show boot [auto-copy [list] | sup-1 | sup-2 | variables]

Syntax Description

auto-copy

(Optional) Determines whether auto-copy is enabled.

list

(Optional) Displays the list of files to be auto-copied.

sup-1

(Optional) Displays the sup-1 VSM configuration.

sup-2

(Optional) Displays the sup-2 VSM configuration.

variables

(Optional) Displays a list of boot variables.


Defaults

None

Command Modes

Global configuration (config)

Supported User Roles

network-admin

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display the system and kickstart boot variables for verification:

switch# config t
switch(config)# show boot 
 
   
sup-1
kickstart variable = 
bootflash:/nexus-1000v-kickstart-mzg.4.0.4
.SV1.2.bin
system variable = 
bootflash:/nexus-1000v-mzg.4.0.4.SV1.2.bin
sup-2
kickstart variable = 
bootflash:/nexus-1000v-kickstart-mzg.4.0.4
.SV1.2.bin
system variable = 
bootflash:/nexus-1000v-mzg.4.0.4.SV1.2.bin
No module boot variable set
switch(config)# 

Related Commands

Command
Description

reload module

Reloads the Virtual Supervisor Module (VSM).

show version

Displays the software version on the VSM.


show cdp

To display your Cisco Discovery Protocol (CDP) configuration, use the show cdp command.

show cdp {all | entry {all | name name} | global | interface interface | traffic interface traffic-interface}

Syntax Description

all

Displays all interfaces in the CDP database.

entry

Displays CDP entries in the database.

name name

Displays a specific CDP entry matching a name.

global

Displays CDP parameters for all interfaces.

interface interface

Displays CDP parameters for a specified interface.

traffic interface traffic-interface

Displays CDP traffic statistics.


Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display the global CDP configuration:

switch(config)# show cdp global

Global CDP information:

CDP enabled globally

Sending CDP packets every 5 seconds

Sending a holdtime value of 10 seconds

Sending CDPv2 advertisements is disabled

Sending DeviceID TLV in Mac Address Format


This example shows how to display the CDP configuration for a specified interface:

switch(config)# show cdp interface ethernet 2/3
Ethernet2/3 is up
    CDP enabled on interface
    Sending CDP packets every 60 seconds
    Holdtime is 180 seconds\
 
   

This example shows how to display the CDP traffic statistics for a specified interface:

switch(config)# show cdp traffic interface ethernet 2/3
----------------------------------------
Traffic statistics for Ethernet2/3
Input Statistics:
    Total Packets: 98
    Valid CDP Packets: 49
        CDP v1 Packets: 49
        CDP v2 Packets: 0
    Invalid CDP Packets: 49
        Unsupported Version: 49
        Checksum Errors: 0
        Malformed Packets: 0
 
   
Output Statistics:
    Total Packets: 47
        CDP v1 Packets: 47
        CDP v2 Packets: 0
    Send Errors: 0
 
   

This example shows how to display the CDP parameters for all interfaces:

switch# show cdp all
Ethernet2/2 is up
    CDP enabled on interface
    Sending CDP packets every 60 seconds
    Holdtime is 180 seconds
Ethernet2/3 is up
    CDP enabled on interface
    Sending CDP packets every 60 seconds
    Holdtime is 180 seconds
Ethernet2/4 is up
    CDP enabled on interface
    Sending CDP packets every 60 seconds
    Holdtime is 180 seconds
Ethernet2/5 is up
    CDP enabled on interface
    Sending CDP packets every 60 seconds
    Holdtime is 180 seconds
Ethernet2/6 is up
    CDP enabled on interface
    Sending CDP packets every 60 seconds
    Holdtime is 180 seconds
mgmt0 is up
    CDP enabled on interface
    Sending CDP packets every 60 seconds
    Holdtime is 180 seconds
 
   

Related Commands

Command
Description

show cdp neighbors

Displays the configuration and capabilities of upstream devices.

cdp enable

In interface mode, enables CDP on an interface. In EXEC mode, enables CDP for your device.

cdp advertise

Assigns the CDP version to advertise.


show cdp neighbors

To display the configuration and capabilities of upstream devices, use the show cdp neighbors command.

show cdp neighbors [interface {control control-int-number | ethernet slot/port |
mgmt mgmt-int-number}] detail

Syntax Description

interface name

(Optional) Specifies CDP neighbors for an interface.

control

Specifies a control interface.

control-int-
number

Number that represents the control interface. The Cisco Nexus 1010 only supports control0

ethernet

Specifies an Ethernet interface.

slot/port

Slot and port number of the Ethernet interface. The slot range is 1-66 and the port range is 1-256.

mgmt

Specifies a management interface.

mgmt-int-
number

Number that represents the management interface. The Cisco Nexus 1010 only supports mgmt0.

detail

Displays the detailed configuration of all CDP neighbors.


Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display the configuration and capabilities of upstream devices:

switch(config)# show cdp neighbors 
Capability Codes: R - Router, T - Trans-Bridge, B - Source-Route-Bridge
                  S - Switch, H - Host, I - IGMP, r - Repeater,
                  V - VoIP-Phone, D - Remotely-Managed-Device,
                  s - Supports-STP-Dispute
 
   
Device ID              Local Intrfce   Hldtme  Capability  Platform      Port ID
 
   
swordfish-6k-2         Eth2/2          169     R S I    WS-C6503-E    Gig1/14 
swordfish-6k-2         Eth2/3          139     R S I    WS-C6503-E    Gig1/15 
swordfish-6k-2         Eth2/4          135     R S I    WS-C6503-E    Gig1/16 
swordfish-6k-2         Eth2/5          177     R S I    WS-C6503-E    Gig1/17 
swordfish-6k-2         Eth2/6          141     R S I    WS-C6503-E    Gig1/18 

This example shows how to display configuration and capabilities of upstream devices for a specific interface:

switch(config)# show cdp neighbors interface ethernet 2/3
Capability Codes: R - Router, T - Trans-Bridge, B - Source-Route-Bridge
                  S - Switch, H - Host, I - IGMP, r - Repeater,
                  V - VoIP-Phone, D - Remotely-Managed-Device,
                  s - Supports-STP-Dispute
 
   
 
   
Device ID              Local Intrfce   Hldtme  Capability  Platform      Port ID
 
   
swordfish-6k-2         Eth2/3          173     R S I    WS-C6503-E    Gig1/15 
 
   
 
   

Related Commands

Command
Description

show cdp

Displays the CDP configuration and capabilities for your device.

cdp enable

In interface mode, enables CDP on an interface. In EXEC mode, enables CDP for your device.

cdp advertise

Assigns the CDP version to advertise.


show cli variables

To display user-defined CLI persistent variables, use the show cli variables command.

To remove user-defined CLI persistent variables, use the cli no var name command in configuration mode.

show cli variables

cli no var name name

Syntax Description

name

Name of an existing variable.


Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display user-defined CLI persistent variables:

switch# show cli variables
VSH Variable List
-----------------
TIMESTAMP="2008-07-02-13.45.15"
testinterface="ethernet 3/1"
 
   

This example shows how to remove the user-defined CLI persistent variable named mgmtport.

switch# cli no var name mgmtport
switch# 

Related Commands

Command
Description

cli var name

Defines a command-line interface (CLI) variable for a terminal session.

run-script

Runs a command script that is saved in a file.


show cores

To view recent core images, use the show cores command.

show cores

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Usage Guidelines

System core image files are generated when a service fails.

Examples

This example shows how to display recent core images:

switch# show cores
Module-num       Instance-num      Process-name     PID      Core-create-time
----------       ------------      ------------     ---      ----------------
switch#

Related Commands

Command
Description

show processes

Displays information regarding process logs.


show file

To display a full filename by entering a partial filename and pressing the Tab key, use the show file command.

show file {bootflash: | volatile: | debug:} partial_filename [cksum | md5sum]

Syntax Description

bootflash

Specifies a directory or filename.

volatile:

Specifies a directory or filename on volatile flash.

debug:

Specifies a directory or filename on expansion flash.

partial_
filename

Portion of the filename to be displayed. Pressing the Tab key lists any existing files that match the partial name.

cksum

(Optional) Displays the CRC checksum for a file.

md5sum

(Optional) Displays the MD5 checksum for a file.


Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Usage Guidelines

When you type a partial filename and then press the Tab key, the CLI completes the filename if the characters that you typed are unique to a single file.

If not, the CLI lists a selection of filenames that match the characters that you typed.

You can then retype enough characters to make the filename unique, and CLI completes the filename for you.

Examples

This example shows how to display a full filename by entering a partial filename and pressing the Tab key:

switch# show file bootflash:nexus-1000v <Tab>
bootflash:nexus-1000v-dplug-mzg.4.0.4.SV1.0.42.bin 
bootflash:nexus-1000v-mzg.4.0.4.SV1.0.42.bin
bootflash:nexus-1000v-kickstart-mzg.4.0.4.SV1.0.42.bin

Related Commands

Command
Description

dir

Displays the contents of a directory or file.

copy

Copies a file from the specified source location to the specified destination location.

mkdir

Creates a directory at the current directory level.

rmdir

Removes a directory.


show interface brief

To display a short version of the interface configuration, use the show interface brief command.

show interface brief

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to to display a short version of the interface configuration:

switch# show int brief
--------------------------------------------------------------------------------
Port VRF Status IP Address Speed MTU
--------------------------------------------------------------------------------
mgmt0 -- up 172.23.232.141 1000 1500
--------------------------------------------------------------------------------
Ethernet VLAN Type Mode Status Reason Speed Port
Interface Ch #
--------------------------------------------------------------------------------
Eth3/2 1 eth trunk up none 1000(D) --
Eth3/3 1 eth access up none 1000(D) --
switch#
 
   

Related Commands

Command
Description

interface

Adds, removes or configures interfaces.

show interface capabilities

Displays information about the capabilities of the interfaces.

show interface counters trunk

Displays the counters for Layer 2 switch port trunk interfaces.

show interface status

Displays the interface line status.


show interface capabilities

To display information about the capabilities of the interfaces, use the show interface capabilities command.

show interface capabilities

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any configuration mode

Supported User Roles

network-admin

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display information about the capabilities of the interfaces:

switch# show interface capabilities
mgmt0
  Model:                 --
  Type:                  --
  Speed:                 10,100,1000,auto
  Duplex:                half/full/auto
  Trunk encap. type:     802.1Q
  Channel:               no
  Broadcast suppression: none
  Flowcontrol:           rx-(none),tx-(none)
  Rate mode:             none
  QOS scheduling:        rx-(none),tx-(none)
  CoS rewrite:           yes
  ToS rewrite:           yes
  SPAN:                  yes
  UDLD:                  yes
  Link Debounce:         no
  Link Debounce Time:    no
  MDIX:                  no
  Port Group Members:    none
 
   
port-channel1
  Model:                 unavailable
  Type:                  unknown
  Speed:                 10,100,1000,10000,auto
  Duplex:                half/full/auto
  Trunk encap. type:     802.1Q
  Channel:               yes
  Broadcast suppression: percentage(0-100)
  Flowcontrol:           rx-(off/on/desired),tx-(off/on/desired)
  Rate mode:             none
  QOS scheduling:        rx-(none),tx-(none)
  CoS rewrite:           yes
  ToS rewrite:           yes
  SPAN:                  yes
  UDLD:                  no
  Link Debounce:         no
  Link Debounce Time:    no
  MDIX:                  no
  Port Group Members:    none
 
   
port-channel2
  Model:                 unavailable
  Type:                  unknown
  Speed:                 10,100,1000,10000,auto
  Duplex:                half/full/auto
  Trunk encap. type:     802.1Q
  Channel:               yes
  Broadcast suppression: percentage(0-100)
  Flowcontrol:           rx-(off/on/desired),tx-(off/on/desired)
  Rate mode:             none
  QOS scheduling:        rx-(none),tx-(none)
  CoS rewrite:           yes
  ToS rewrite:           yes
  SPAN:                  yes
  UDLD:                  no
  Link Debounce:         no
  Link Debounce Time:    no
  MDIX:                  no
  Port Group Members:    none
 
   
port-channel12
  Model:                 unavailable
  Type:                  unknown
  Speed:                 10,100,1000,10000,auto
  Duplex:                half/full/auto
  Trunk encap. type:     802.1Q
  Channel:               yes
  Broadcast suppression: percentage(0-100)
  Flowcontrol:           rx-(off/on/desired),tx-(off/on/desired)
  Rate mode:             none
  QOS scheduling:        rx-(none),tx-(none)
  CoS rewrite:           yes
  ToS rewrite:           yes
  SPAN:                  yes
  UDLD:                  no
  Link Debounce:         no
  Link Debounce Time:    no
  MDIX:                  no
  Port Group Members:    none
 
   
control0
  Model:                 --
  Type:                  --
  Speed:                 10,100,1000,auto
  Duplex:                half/full/auto
  Trunk encap. type:     802.1Q
  Channel:               no
  Broadcast suppression: none
  Flowcontrol:           rx-(none),tx-(none)
  Rate mode:             none
  QOS scheduling:        rx-(none),tx-(none)
  CoS rewrite:           yes
  ToS rewrite:           yes
  SPAN:                  yes
  UDLD:                  yes
  Link Debounce:         no
  Link Debounce Time:    no
  MDIX:                  no
  Port Group Members:    none
 
   
switch#

Related Commands

Command
Description

interface

Adds, removes or configures interfaces.

show interface brief

Displays a short version of the interface configuration.

show interface counters trunk

Displays the counters for Layer 2 switch port trunk interfaces

show interface status

Displays the interface line status.


 
   

show interface counters trunk

To display the counters for Layer 2 switch port trunk interfaces, use the show interface counters trunk command.

show interface {ethernet slot/port} counters trunk

Syntax Description

ethernet slot/port

Specifies the module number and port number for the trunk interface that you want to display.


Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Usage Guidelines

The device supports only IEEE 802.1Q encapsulation. This command also displays the counters for trunk port channels.

Examples

This example shows how to display the counters for a trunk interface. This display shows the frames transmitted and received through the trunk interface, as well as the number of frames with the wrong trunk encapsulation:

switch# show interface ethernet 2/9 counters trunk
 
   
---------------------------------------------------------------------
Port            TrunkFramesTx   TrunkFramesRx      WrongEncap
---------------------------------------------------------------------
Ethernet2/9                 0               0               0
switch# 
 
   

Related Commands

Command
Description

clear counters

Clears interface counters

show interface brief

Displays a short version of the interface configuration.

show interface capabilities

Displays information about the capabilities of the interfaces.

show interface status

Displays the interface line status.


show interface status

To display the interface line status, use the show interface status command.

show interface status [down | err-disabled | inactive | module module-number | up]

Syntax Description

down

(Optional) Specifies interfaces that are in the down state.

err-disabled

(Optional) Specifies interfaces that are in the errdisabled state.

inactive

(Optional) Specifies interfaces that are in the inactive state.

module

(Optional) Limits the display to interfaces on a particular module.

module-number

Number that identifies an existing module. The range is from 1 from 66.

up

(Optional) Specifies interfaces that are in the up state.


Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display the line status for interfaces in the up state:

switch# show interface status up
 
   
--------------------------------------------------------------------------------
 
   
Port           Name               Status   Vlan      Duplex  Speed   Type
--------------------------------------------------------------------------------
 
   
mgmt0          --                 up       routed    full    1000    --
 
   
ctrl0          --                 up       routed    full    1000    --
 
   
switch#

Related Commands

Command
Description

interface

Adds, removes or configures interfaces.

show interface brief

Displays a short version of the interface configuration.

show interface capabilities

Displays information about the capabilities of the interfaces.

show interface counters trunk

Displays the counters for Layer 2 switch port trunk interfaces


 
   

show logging logfile

To display the contents of the log file, use the show logging logfile command.

show logging logfile [start-time time | end-time time]

Syntax Description

start-time

(Optional) Specifies the starting time for which you want the logfile displayed.

end-time

(Optional) Specifies the ending time for which you want the logfile displayed.

time

Specify the time as follows:

Time
Description

yyyy

Year

mmm

Month (for example, jan, feb, mar)

dd

Day of month (for example 01)

hh:mm:ss

Hour, minutes, seconds (for example, 04:00:00)


Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display the contents of the logfile:

switch# show logging logfile start-time 2009 Aug 23 22:00:00 end-time 2009 Aug 24 24:00:00
2009 Aug 23 22:58:00 doc-n1000v %PORTPROFILE-5-SYNC_COMPLETE: Sync completed.
2009 Aug 24 23:53:15 doc-n1000v %MODULE-5-MOD_OK: Module 3 is online (serial: )
2009 Aug 24 23:53:15 doc-n1000v %PLATFORM-5-MOD_STATUS: Module 3 current-status is MOD_S
TATUS_ONLINE/OK 
switch# 

Related Commands

Command
Description

logging logfile

Configures the log file used to store system messages.


show logging module

To display the current configuration for logging module messages to the log file, use the show logging module command.

show logging module

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display the configuration for logging module messages to the log file:

switch# show logging module
Logging linecard:               disabled
switch# 
 
   

Related Commands

Command
Description

logging module

Starts logging of module messages to the log file.


show logging server

To display the current server configuration for logging system messages, use the show logging server command.

show logging server

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display the current server configuration for logging system messages:

switch## show logging server
Logging server:                 enabled
{172.28.254.253}
        server severity:        notifications
        server facility:        local7
        server VRF:             management
switch## 
 
   

Related Commands

Command
Description

logging server

Designates a remote server for system message logging, and configures it.


show logging timestamp

To display the unit of measure used in the system messages time stamp, use the show logging timestamp command.

show logging timestamp

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display the unit of measure used in the system messages time stamp:

switch## show logging timestamp
Logging timestamp:              Seconds
switch##
 
   

Related Commands

Command
Description

logging timestamp

Sets the unit of measure for the system messages time stamp.


show module

To display module information, use the show module command.

show module [module-number | internal | ipv6-info | uptime | vem]

Syntax Description

module-number

(Optional) Number that identifies an existing module. The range is from 1 from 22.

internal

(Optional) Displays information about the module.

ipv6-info

(Optional) Displays information related to the server IPv6 address.

uptime

(Optional) Displays how long the module has been up and running.

vem

(Optional) Displays information about the Virtual Ethernet Module (VEM).


Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display module information:

switch# show module
Mod  Ports  Module-Type                      Model              Status
---  -----  -------------------------------- ------------------ ------------
1    0      Virtual Supervisor Module        Nexus1000V         active *
 
   
Mod  Sw               Hw
---  ---------------  ------
1    4.0(4)SP1(1)     0.0
 
   
Mod  MAC-Address(es)                         Serial-Num
---  --------------------------------------  ----------
1    00-19-07-6c-5a-a8 to 00-19-07-6c-62-a8  NA
 
   
Mod  Server-IP        Server-UUID                           Server-Name
---  ---------------  ------------------------------------  --------------------
 
   
1    172.23.232.152   NA                                    NA
 
   
 
   
* this terminal session
switch#

Related Commands

Command
Description

svs-domain

Configures an SVS domain and enter SVS domain configuration mode.

show svs domain

Displays the domain information for the Cisco Nexus 1010, such as the domain ID, control VLAN ID, and management VLAN ID.


show network

To display information about the network, use the show network command.

show network [counters | uplinks | virtual-service-blade name]

Syntax Description

counters

(Optional) Specifies statistical information about the network.

uplinks

(Optional) Specifies information about network uplinks, such as addresses, duplex settings, and traffic.

virtual-service-blade

(Optional) Specifies information about a virtual service blade.

name

Name of an existing virtual service blade.


Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display statistical information about the network:

switch# show network counters
-----------------------------------------------------------------------
                Port       InOctets    InUcastPkts    InMcastPkts
-----------------------------------------------------------------------
    GigabitEthernet1       87485620        1110644          79637
    GigabitEthernet2              0              0              0
    GigabitEthernet3       62129278         714059           2144
    GigabitEthernet4              0              0              0
    GigabitEthernet5       57579524         579127           2138
    GigabitEthernet6              0              0              0
        PortChannel1       87485620        1110644          79637
        PortChannel2      119708802        1293186           4282
-----------------------------------------------------------------------
                Port      OutOctets   OutUcastPkts   OutMcastPkts
-----------------------------------------------------------------------
    GigabitEthernet1       27703018         262330          79637
    GigabitEthernet2              0              0              0
    GigabitEthernet3         274156           2144           2144
    GigabitEthernet4              0              0              0
    GigabitEthernet5         273664           2138           2138
    GigabitEthernet6              0              0              0
        PortChannel1       27703018         262330          79637
        PortChannel2         547820           4282           4282
switch#

Related Commands

Command
Description

show network

Displays information about the network.

show virtual-service-blade

Displays information about virtual service blades.

show virtual-service-blade-
type summary

Displays information about the virtual service types and the virtual services belonging to that type.


show ntp peer-status

To display the status for all Network Time Protocol (NTP) servers and peers, use the show ntp peer-status command.

show ntp peer-status

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Usage Guidelines

A domain name is resolved only when you have a DNS server configured.

Examples

This example shows how to display the configured server and peers:

switch# show ntp peer-status
Total peers : 2
* - selected for sync, + -  peer mode(active),
- - peer mode(passive), = - polled in client mode
    remote          local        st  poll  reach   delay      vrf
------------------------------------------------------------------------
=192.0.2.10      0.0.0.0         16   16      0   0.00000 default
+72.229.253.127  0.0.0.0         16   16      0   0.00000 default
switch#

Related Commands

Command
Description

show ntp peers

Displays all NTP peers.

show ntp statistics

Displays NTP statistics.

ntp server

Forms an association with a server.

ntp peer

Forms an association with a peer.


show ntp peers

To display all Network Time Protocol (NTP) peers, use the show ntp peers command.

show ntp peers

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Usage Guidelines

A domain name is resolved only when you have a DNS server configured.

Examples

This example shows how to display the configured server and peers:

switch# show ntp peers
--------------------------------------------------
  Peer IP Address               Serv/Peer
--------------------------------------------------
  192.0.2.10                    Server (configured)
  72.229.253.127                Peer (configured)
switch#
 
   

Related Commands

Command
Description

show ntp peer-status

Displays the status for all NTP servers and peers.

show ntp statistics

Displays NTP statistics.

ntp server

Forms an association with a server.

ntp peer

Forms an association with a peer.


show ntp statistics

To display Network Time Protocol (NTP) statistics, use the show ntp statistics command.

show ntp statistics {io | local | memory | peer {ip-address | dns-name}}

Syntax Description

io

Specifies the input-output statistics.

local

Specifies the counters maintained by the local NTP.

memory

Specifies the statistics counters related to the memory code.

peer

Specifies the per-peer statistics counter of a peer.

ip-address

IP address of this peer.

dns-name

DNS name of this peer.


Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Usage Guidelines

A domain name is resolved only when you have a DNS server configured.

Examples

This example shows how to display the configured server and peers:

switch# show ntp statistics local
system uptime:          6742265
time since reset:       6742265
old version packets:    0
old version packets:    0
unknown version number: 0
bad packet format:      0
packets processed:      0
bad authentication:     0
packets rejected:       0
switch#

Related Commands

Command
Description

ntp server

Forms an association with a server.

ntp peer

Forms an association with a peer.


show password strength-check

To display whether the password strength is being checked, use the show password strength-check command.

show password strength-check

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display whether the password strength is being checked:

switch# show password strength-check
Password strength check enabled
switch#

Related Commands

Command
Description

password strength-check

Enables password-strength checking.

username

Creates a user account.

role name

Names a user role and puts you in role configuration mode for that role.


show processes

To display the state and the start count of all processes, use the show processes command.

show processes [cpu | log | memory]

Syntax Description

cpu

(Optional) Specifies processes related to the CPU.

log

(Optional) Specifies information regarding process logs.

memory

(Optional) Specifies processes related to memory.


Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display the state and the start count of all processes:

switch# show processes
 
   
PID    State  PC        Start_cnt    TTY   Type  Process
-----  -----  --------  -----------  ----  ----  -------------
    1      S  77f8a468            1     -     O  init
    2      S         0            1     -     O  ksoftirqd/0
    3      S         0            1     -     O  desched/0
    4      S         0            1     -     O  events/0
    5      S         0            1     -     O  khelper
   10      S         0            1     -     O  kthread
   18      S         0            1     -     O  kblockd/0
   35      S         0            1     -     O  khubd
  121      S         0            1     -     O  pdflush
  122      S         0            1     -     O  pdflush
  124      S         0            1     -     O  aio/0
  123      S         0            1     -     O  kswapd0
  709      S         0            1     -     O  kseriod
  756      S         0            1     -     O  kide/0
  766      S         0            1     -     O  ata/0
  770      S         0            1     -     O  scsi_eh_0
 1096      S         0            1     -     O  kjournald
 1101      S         0            1     -     O  kjournald
 1620      S         0            1     -     O  kjournald
 1627      S         0            1     -     O  kjournald
 1952      S  77f6c18e            1     -     O  portmap
 1965      S         0            1     -     O  nfsd
 1966      S         0            1     -     O  nfsd
 1967      S         0            1     -     O  nfsd
 1968      S         0            1     -     O  nfsd
 1969      S         0            1     -     O  nfsd
 1970      S         0            1     -     O  nfsd
 1971      S         0            1     -     O  nfsd
 1972      S         0            1     -     O  nfsd
 1973      S         0            1     -     O  lockd
 1974      S         0            1     -     O  rpciod
 1979      S  77f6e468            1     -     O  rpc.mountd
 1989      S  77f6e468            1     -     O  rpc.statd
 2016      S  77e0e468            1     -    VG  sysmgr
 2298      S         0            1     -     O  mping-thread
 2299      S         0            1     -     O  mping-thread
 2315      S         0            1     -     O  stun_kthread
 2316      S         0            1     -     O  stun_arp_mts_kt
 2339      S         0            1     -     O  redun_kthread
 2340      S         0            1     -     O  redun_timer_kth
 2866      S         0            1     -     O  sf_rdn_kthread
 2866      S         0            1     -     O  sf_rdn_kthread
 2867      S  77f37468            1     -    VU  xinetd
 2868      S  77f6e468            1     -    VU  tftpd
 2869      S  7788c1b6            1     -    VL  syslogd
 2870      S  77ecf468            1     -    VU  sdwrapd
 2872      S  77d94468            1     -    VU  platform
 2877      S         0            1     -     O  ls-notify-mts-t
 2889      S  77eb2be4            1     -    VU  pfm_dummy
 2896      S  77f836be            1     -     O  klogd
 2903      S  77d9ebe4            1     -    VL  vshd
 2904      S  77e41468            1     -    VU  stun
 2905      S  77a74f43            1     -    VL  smm
 2906      S  77e5a468            1     -    VL  session-mgr
 2907      S  77c4e468            1     -    VL  psshelper
 2908      S  77f75468            1     -    VU  lmgrd
 2909      S  77e36be4            1     -    VG  licmgr
 2910      S  77ebe468            1     -    VG  fs-daemon
 2911      S  77ec5468            1     -    VL  feature-mgr
 2912      S  77e7a468            1     -    VU  confcheck
 2913      S  77eb3468            1     -    VU  capability
 2915      S  77c4e468            1     -    VU  psshelper_gsvc
 2922      S  77f75468            1     -     O  cisco
 2937      S  77895f43            1     -    VL  clis
 2937      S  77895f43            1     -    VL  clis
 2952      S  77cba468            1     -    VL  xmlma
 2953      S  77e8b468            1     -    VL  vmm
 2955      S  77e80468            1     -    VU  ttyd
 2957      S  77ecb6be            1     -    VL  sysinfo
 2958      S  77b57468            1     -    VL  sksd
 2959      S  77ea7468            1     -    VG  res_mgr
 2960      S  77e53468            1     -    VG  plugin
 2961      S  77ccf468            1     -    VL  mvsh
 2962      S  77e05468            1     -    VU  module
 2963      S  77cce468            1     -    VL  evms
 2964      S  77ccf468            1     -    VL  evmc
 2965      S  77ecc468            1     -    VU  core-dmon
 2966      S  7765b40d            1     -    VL  ascii-cfg
 2967      S  77cebbe4            1     -    VL  securityd
 2968      S  77cb5468            1     -    VU  cert_enroll
 2969      S  77b17be4            1     -    VL  aaa
 2973      S  77e19468            1     -    VU  ExceptionLog
 2975      S  77dfb468            1     -    VU  bootvar
 2976      S  77df9468            1     -    VG  ifmgr
 2977      S  77ead468            1     -    VU  tcap
 2978      S  77a6bf43            1     -    VL  l3vm
 2978      S  77a6bf43            1     -    VL  l3vm
 2979      S  77a62f43            1     -    VL  u6rib
 2980      S  77a62f43            1     -    VL  urib
 2981      S  77f30be4            1     -    VU  core-client
 2983      S  77b95468            1     -    VL  aclmgr
 3008      S  77d51468            1     -    VU  aclcomp
 3011      S  7774440d            1     -    VL  tacacs
 3012      S  77a72f43            1     -    VL  adjmgr
 3016      S  77a74f43            1     -    VL  arp
 3021      S  778a1896            1     -    VL  icmpv6
 3022      S  7791ef43            1     -    VL  netstack
 3050      S  7770240d            1     -    VL  radius
 3051      S  77f59be4            1     -    VL  ip_dummy
 3052      S  77f59be4            1     -    VL  ipv6_dummy
 3053      S  7783c40d            1     -    VU  ntp
 3054      S  77f59be4            1     -    VL  pktmgr_dummy
 3055      S  778ae40d            1     -    VL  snmpd
 3056      S  77f59be4            1     -    VL  tcpudp_dummy
 3063      S  7782d40d            1     -    VL  cdp
 3064      S  77b1540d            1     -    VL  dcos-xinetd
 3154      S  77b4040d            1     -     O  ntpd
 3195      S  77e0d468            1     -    VL  vsim
 3196      S  778ee40d            1     -    VL  ufdm
 3196      S  778ee40d            1     -    VL  ufdm
 3197      S  77d42468            1     -    VU  sf_nf_srv
 3198      S  778e240d            1     -    VL  sal
 3199      S  77a14f43            1     -    VL  rpm
 3200      S  778cd40d            1     -    VG  pltfm_config
 3201      S  77efc468            1     -    VU  pixmc
 3202      S  77e0f468            1     -    VG  pixm
 3203      S  77c43468            1     -    VU  pdl_srv_tst
 3204      S  7789e40d            1     -    VL  nfm
 3205      S  77ddc468            1     -    VU  msp
 3206      S  77dbc468            1     -    VL  monitor
 3207      S  7789c40d            1     -    VL  mfdm
 3208      S  7787340d            1     -    VL  l2fm
 3209      S  77dc0468            1     -    VL  ipqosmgr
 3210      S  77e81468            1     -    VU  ethanalyzer
 3211      S  777b740d            1     -    VL  dhcp_snoop
 3212      S  77b3940d            1     -    VL  dcos-thttpd
 3213      S  77c26468            1     -    VU  copp
 3214      S  77b2b468            1     -    VL  eth_port_channel
 3215      S  77d15468            1     -    VL  vlan_mgr
 3219      S  758bc40d            1     -    VU  vms
 3220      S  77b8a468            1     -    VL  eth-port-sec
 3221      S  77abb468            1     -    VL  stp
 3221      S  77abb468            1     -    VL  stp
 3226      S  77de5468            1     -    VL  lacp
 3228      S  777ba40d            1     -    VL  ethpm
 3232      S  77a0127b            1     -    VL  igmp
 3235      S  77dba468            1     -    VL  private-vlan
 3241      S  77d70468            1     -    VU  vim
 3246      S  77d4b468            1     -    VU  portprofile
 3285      S  77f836be            1     1     O  getty
 3286      S  77f806be            1    S0     O  getty
 3290      S  77f1deee            1     -     O  gettylogin1
 3308      S  77f836be            1    S1     O  getty
 3360      S  77ae140d            1     -     O  dcos_sshd
 3361      S  77aaa468            1     8     O  vsh
 4213      Z         0            1     -     O  vmw_maintenance
25188      Z         0            1     -     O  vmw_maintenance
31228      Z         0            1     -     O  vmw_maintenance
  427      Z         0            1     -     O  vmw_maintenance
 1035      Z         0            1     -     O  vmw_maintenance
 2439      Z         0            1     -     O  vmw_maintenance
 7167      Z         0            1     -     O  vmw_maintenance
 8246      Z         0            1     -     O  vmw_maintenance
 8856      Z         0            1     -     O  vmw_maintenance
10539      Z         0            1     -     O  vmw_maintenance
10539      Z         0            1     -     O  vmw_maintenance
16083      Z         0            1     -     O  vmw_maintenance
19353      S  77ae140d            1     -     O  dcos_sshd
19354      S  7752340d            1     -     O  xmlsa
13167      S  77ae140d            1     -     O  dcos_sshd
13169      S  77aaa468            1    17     O  vsh
14253      S  7798140d            1     -     O  in.dcos-telnetd
14254      S  77aaa468            1    18     O  vsh
14757      S  7798140d            1     -     O  in.dcos-telnetd
14758      S  77a82eee            1    19     O  vsh
14933      S  77f426be            1    19     O  more
14934      S  77aa9be4            1    19     O  vsh
14935      R  77f716be            1     -     O  ps
    -     NR         -            0     -    VL  eigrp
    -     NR         -            0     -    VL  isis
    -     NR         -            0     -    VL  ospf
    -     NR         -            0     -    VL  ospfv3
    -     NR         -            0     -    VL  rip
    -     NR         -            0     -    VL  eigrp
    -     NR         -            0     -    VL  isis
    -     NR         -            0     -    VL  ospf
    -     NR         -            0     -    VL  ospfv3
    -     NR         -            0     -    VL  rip
    -     NR         -            0     -    VL  rip
    -     NR         -            0     -    VL  eigrp
    -     NR         -            0     -    VL  isis
    -     NR         -            0     -    VL  ospf
    -     NR         -            0     -    VL  ospfv3
    -     NR         -            0     -    VL  rip
    -     NR         -            0     -    VL  eigrp
    -     NR         -            0     -    VL  isis
    -     NR         -            0     -    VL  ospf
    -     NR         -            0     -    VL  ospfv3
    -     NR         -            0     -    VL  rip
    -     NR         -            0     -    VL  amt
    -     NR         -            0     -    VL  bgp
    -     NR         -            0     -    VL  eou
    -     NR         -            0     -    VL  glbp
    -     NR         -            0     -    VL  hsrp_engine
    -     NR         -            0     -    VU  installer
    -     NR         -            0     -    VL  interface-vlan
    -     NR         -            0     -    VU  lisp
    -     NR         -            0     -    VL  msdp
    -     NR         -            0     -    VL  pim
    -     NR         -            0     -    VL  pim6
    -     NR         -            0     -    VL  scheduler
    -     NR         -            0     -    VL  isis
    -     NR         -            0     -    VL  ospf
    -     NR         -            0     -    VL  ospfv3
    -     NR         -            0     -    VL  rip
    -     NR         -            0     -    VL  amt
    -     NR         -            0     -    VL  bgp
    -     NR         -            0     -    VL  eou
    -     NR         -            0     -    VL  glbp
    -     NR         -            0     -    VL  hsrp_engine
    -     NR         -            0     -    VU  installer
    -     NR         -            0     -    VL  interface-vlan
    -     NR         -            0     -    VU  lisp
    -     NR         -            0     -    VL  msdp
    -     NR         -            0     -    VL  pim
    -     NR         -            0     -    VL  pim6
    -     NR         -            0     -    VL  scheduler
    -     NR         -            0     -    VU  vbuilder
 
   
State: R(runnable), S(sleeping), Z(defunct)
 
   
Type:  U(unknown), O(non sysmgr)
       NR(not running), ER(terminated etc)
switch#

Related Commands

Command
Description

show system redundancy status

Displays the HA status of the system.

show module

Displays information about all available VSMs and VEMs in the system.


show running-config diff

To verify the difference between the running and startup configurations, use the show running-config diff command.

show running-config diff

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Usage Guidelines

When you switch over from one Virtual Supervisor Module (VSM) to another, any unsaved running configuration that was available in an active VSM is still unsaved in the new active VSM. You can verify this unsaved running configuration with this command, and save that configuration in the startup, if needed.

Examples

This example shows how to verify the difference between the running and startup configurations:

switch# show running-config diff
*** Startup-config
--- Running-config
***************
*** 1,38 ****
version 4.0(4)SP1(1)
role feature-group name new
role name testrole
username admin password 5 $1$S7HvKc5G$aguYqHl0dPttBJAhEPwsy1 role network-admin
telnet server enable
ip domain-lookup
 
   

Related Commands

Command
Description

system switchover

Initiates, on the active VSM, a manual switchover to the standby VSM.

copy running-config startup-config

Copies the running configuration to the startup configuration.


show running-config interface ethernet

To display the running configuration for a specific Ethernet interface, use the show running-config interface ethernet command.

show running-config interface ethernet slot/port

Syntax Description

slot/port

Slot number and port number for an existing Ethernet interface.


Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display the running configuration for Ethernet interface 2/1:

switch# show running-config interface ethernet 2/1
version 4.0(4)SP1(1)
 
   
interface Ethernet3/2
  inherit port-profile uplink_all

Related Commands

Command
Description

show running-config interface port-channel

Displays information about the running configuration of the port channel.

show running-config interface diff

Verifies the difference between the running and startup configuration.


show running-config interface port-channel

To display the running configuration for a specific port channel, use the show running-config interface port-channel command.

show running-config interface port-channel {channel-number}

Syntax Description

channel-number

Number of the port-channel group. The range of values is from 1 to 4096.


Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display the running configuration for port channel 10:

switch(config)# show running-config interface port-channel 10
version 4.0(4)SP1(1)
 
   
interface port-channel10
  switchport
  switchport mode trunk
 
   

Related Commands

Command
Description

show running-config interface diff

Verifies the difference between the running and startup configuration.

show running-config interface ethernet

Displays the running configuration for a specific Ethernet interface.


show snmp

To display information about one or more destination profiles, use the show snmp command.

show snmp [community | context | engineID | group | host | sessions | trap | user]

Syntax Description

community

(Optional) Specifies SNMP community strings.

context

(Optional) Specifies SNMP context mapping entries.

engineID

(Optional) Specifies the SNMP engineID.

group

(Optional) Specifies the SNMP group.

host

(Optional) Specifies SNMP hosts.

sessions

(Optional) Specifies SNMP sessions.

trap

(Optional) Specifies SNMP traps.

user

(Optional) Specifies SNMPv3 users.


Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display information about the SNMP engineID:

switch# show snmp engineID
Local SNMP engineID: [Hex] 800000090302000C000000
                     [Dec] 128:000:000:009:003:002:000:012:000:000:000
switch#

Related Commands

Command
Description

snmp-server contact

Configures sysContact, which is the SNMP contact name.

snmp-server location

Configures sysLocation, which is the SNMP location.


show ssh key

To display the Secure Shell (SSH) server keys, use the show ssh key command.

show ssh key [dsa | rsa]

Syntax Description

dsa

(Optional) Specifies the display of DSA SSH keys.

rsa

(Optional) Specifies the display of RSA SSH keys.


Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display SSH server keys:

switch# show ssh key
switch#

Related Commands

Command
Description

ssh key

Generates the SSH server key.

show ssh server

Displays whether the SSH server is enabled.


show ssh server

To display the Secure Shell (SSH) server configuration, use the show ssh server command.

show ssh server

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display the SSH server configuration:

switch# show ssh server
ssh is enabled
version 2 enabled
switch#
 
   

Related Commands

Command
Description

ssh

Creates an SSH IP session to a remote device using IP.

ssh key

Generates the SSH server key.

show ssh key

Displays the SSH server keys.


show startup-config aaa

To display the Authentication, Authorization and Accounting protocol (AAA) configuration in the startup configuration, use the show startup-config aaa command.

show startup-config aaa

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display the AAA configuration in the startup configuration:

switch# show startup-config aaa
version 4.0(4)SP1(1)
 
   
switch#

Related Commands

Command
Description

aaa authentication login default

Cconfigures the default AAA authentication methods.

show startup-config security

Displays the user account configuration in the startup configuration


show startup-config security

To display the user account configuration in the startup configuration, use the show startup-config security command.

show startup-config security

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display the user account configuration in the startup configuration:

switch# show startup-config security
version 4.0(4)SP1(1)
username admin password 5 $1$3/cH7rWm$W3QUjfQOyfySds5p3/PtX.  role network-admin
 
   
username kathleen password 5 $1$7vewiaFA$iLCfmalyKeSBySqrAgvNZ/  role network-op
 
   
erator
username kathleen role network-admin
telnet server enable
 
   
switch#

Related Commands

Command
Description

show startup-config aaa

Displays the Authentication, Authorization and Accounting protocol (AAA) configuration.


show svs domain

To display domain information, such as the domain ID, control VLAN ID, and management VLAN ID for the Cisco Nexus 1010, use the show svs domain command:

show svs domain

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display the Virtual Supervisor Module (VSM) domain configuration:

switch# show svs domain

SVS domain config:

Domain id: 3555

Control vlan: 305

Management vlan: 233

L2/L3 Control mode: L2

L3 control interface: NA

Status: Config not pushed to VC.

switch#

Related Commands

Command
Description

svs-domain

Creates and configures a domain for the Cisco Nexus 1000V that identifies the VSM and Virtual Ethernet Modules (VEMs) and the control and packet VLANs for communication and management.


show svs neighbors

To display all SVS neighbors, use the show svs neighbors command.

show svs neighbors

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display all SVS neighbors:

switch# show svs neighbors
 
   
Active Domain ID: 113
 
   
AIPC Interface MAC: 0050-56b6-2bd3
Inband Interface MAC: 0050-56b6-4f2d
 
   
Src MAC           Type   Domain-id    Node-id     Last learnt (Sec. ago)
------------------------------------------------------------------------
 
   
0002-3d40-7102     VEM       113         0302     71441.12
0002-3d40-7103     VEM       113         0402       390.77
 
   
switch#

Related Commands

Command
Description

show svs domain

Displays the Virtual Supervisor Module (VSM) domain configuration.

svs-domain

Creates and configures a domain for the Cisco Nexus 1000V that identifies the VSM and Virtual Ethernet Modules (VEMs) and the control and packet VLANs for communication and management.


show svs domain

To display the following domain information for the Cisco Nexus 1010, use the show svs domain command:

Domain ID

Control VLAN ID

Management VLAN ID

show svs domain

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display the VSM domain configuration:

switch# show svs domain

SVS domain config:

Domain id: 3555

Control vlan: 305

Management vlan: 233

L2/L3 Control mode: L2

L3 control interface: NA

Status: Config not pushed to VC.

switch#

Related Commands

Command
Description

svs-domain

Creates and configures a domain for the Cisco Nexus 1000V that identifies the VSM and VEMs and the control and packet VLANs for communication and management.


show system resources

To display system-related CPU and memory statistics, use the show system resources command.

show system resources

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display system-related CPU and memory statistics:

switch# show system resources
Load average:   1 minute: 0.00   5 minutes: 0.00   15 minutes: 0.00
Processes   :   261 total, 1 running
CPU states  :   0.0% user,   0.0% kernel,   100.0% idle
Memory usage:   2075012K total,    946780K used,   1128232K free
                  66764K buffers,  475404K cache
 
   
switch#

Related Commands

Command
Description

show network

Displays information about the network.

show module

Displays module information.

show processes

Displays the state and the start count of all processes


show tacacs-server

To display the TACACS+ server configuration, use the show tacacs-server command.

show tacacs-server

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Usage Guidelines

The global shared key is saved in encrypted form in the running configuration. To display the key, use the show running-config command.

Examples

This example shows how to displays the TACACS+ server configuration:

switch# show tacacs-server
Global TACACS+ shared secret:********
timeout value:5
deadtime value:0
total number of servers:1
following TACACS+ servers are configured:
10.10.2.2:
available on port:49

Related Commands

Command
Description

tacacs+ enable

Enables TACACS+.

tacacs-server key

Designates the global key shared between the Cisco Nexus 1000V and the TACACS+ server hosts.

show tacacs-server

Displays the TACACS+ server configuration.


show tcp client

To display information about the TCP client, use the show tcp client command.

show tcp client [pid pid] [detail]

Syntax Description

pid

(Optional) Specifies information about the client process.

pid

ID for the specified client process.

detail

(Optional) Specifies socket details.


Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display information about the TCP client:

switch# show tcp client
Total number of clients: 12
Total number of cancels: 255372
client: syslogd, pid: 2962, sockets: 2
client: ntp, pid: 3148, sockets: 2
client: dcos-xinetd, pid: 3156, sockets: 2
client: snmpd, pid: 3150, sockets: 4
client: ntpd, pid: 3243, sockets: 3
client: dcos-thttpd, pid: 3305, sockets: 2
client: radiusd, pid: 3143, sockets: 2
client: vms, pid: 3318, sockets: 0
client: dcos_sshd, pid: 3491, sockets: 3
client: vsh, pid: 3494, sockets: 0
client: in.dcos-telnetd, pid: 25028, sockets: 3
client: vsh, pid: 25029, sockets: 0

Related Commands

Command
Description

show tcp connection

Displays information about the TCP connection.

show tcp statistics

Displays TCP protocol statistics.


show tcp connection

To display information about the connection, use the show tcp connection command.

show tcp connection [pid pid | tcp | udp | raw] [local {srcIP | srcIP6}] [foreign {dstIP | dstIP6}] [detail]

Syntax Description

pid

(Optional) Specifies the client process connection status.

pid

ID for the client process connection status.

tcp

(Optional) Specifies all TCP connections.

udp

(Optional) Specifies all UDP connections.

raw

(Optional) Specifies all RAW connections.

local

(Optional) Specifies all TCP connections with a specified local address.

srcIP

Local IP address in the format A.B.C.D.

srcIP6

Local IP address in the format A:B::C:.D.

foreign

(Optional) Specifies all TCP connections with a specified foreign address.

dstIP

Destination IP address in the format A.B.C.D.

dstIP6

Destination IP address in the format A:B::C:.D.

detail

(Optional) Specifies detailed connection infomation.


Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display detailed information about the connection:

switch# show tcp connection detail
Total number of tcp sockets: 8
Active connections (including servers)
Local host: * (22), Foreign host: * (0)
  Protocol: tcp6, type: stream, ttl: 64, tos: 0, Id: 6
  Options: none, state:
  Receive buffer:
    cc: 0, hiwat: 25300, lowat: 1, flags: none
  Send buffer:
    cc: 0, hiwat: 25300, lowat: 2048, flags:
  Sequence number state:
    iss: 0, snduna: 0, sndnxt: 0, sndwnd: 0
    irs: 0, rcvnxt: 0, rcvwnd: 0, sndcwnd: 1012
  Timing parameters:
    srtt: 0 ms, rtt: 0 ms, rttv: 12000 ms, krtt: 3000 ms
    rttmin: 1000 ms, mss: 1012, duration: 1390144100 ms
  State: LISTEN
  Flags: none
  Context: management
 
   
Local host: * (23), Foreign host: * (0)
  Protocol: tcp6, type: stream, ttl: 64, tos: 0, Id: 17
  Options: none, state:
  Receive buffer:
    cc: 0, hiwat: 17204, lowat: 1, flags: none
  Send buffer:
    cc: 0, hiwat: 17204, lowat: 2048, flags:
  Sequence number state:
    iss: 0, snduna: 0, sndnxt: 0, sndwnd: 0
    irs: 0, rcvnxt: 0, rcvwnd: 0, sndcwnd: 1012
  Timing parameters:
    srtt: 0 ms, rtt: 0 ms, rttv: 12000 ms, krtt: 3000 ms
    rttmin: 1000 ms, mss: 1012, duration: 1390144100 ms
  State: LISTEN
  Flags: none
  Context: management
 
   
Local host: * (80), Foreign host: * (0)
  Protocol: tcp6, type: stream, ttl: 64, tos: 0, Id: 13
  Options: none, state: none
  Receive buffer:
    cc: 0, hiwat: 16384, lowat: 1, flags: none
  Send buffer:
    cc: 0, hiwat: 16384, lowat: 2048, flags:
  Sequence number state:
    iss: 0, snduna: 0, sndnxt: 0, sndwnd: 0
    irs: 0, rcvnxt: 0, rcvwnd: 0, sndcwnd: 1073725440
  Timing parameters:
    srtt: 0 ms, rtt: 0 ms, rttv: 12000 ms, krtt: 3000 ms
    rttmin: 1000 ms, mss: 1024, duration: 1390144100 ms
  State: LISTEN
  Flags: none
  Context: management
 
   
Local host: * (80), Foreign host: * (0)
  Protocol: tcp, type: stream, ttl: 64, tos: 0, Id: 14
  Options: none, state: none
  Receive buffer:
    cc: 0, hiwat: 16500, lowat: 1, flags: none
  Send buffer:
    cc: 0, hiwat: 16500, lowat: 2048, flags:
  Sequence number state:
    iss: 0, snduna: 0, sndnxt: 0, sndwnd: 0
    irs: 0, rcvnxt: 0, rcvwnd: 0, sndcwnd: 500
  Timing parameters:
    srtt: 0 ms, rtt: 0 ms, rttv: 12000 ms, krtt: 3000 ms
    rttmin: 1000 ms, mss: 500, duration: 1390144100 ms
  State: LISTEN
  Flags: none
  Context: management
 
   
Local host: * (161), Foreign host: * (0)
  Protocol: tcp, type: stream, ttl: 64, tos: 0, Id: 3
  Options: none, state: none
  Receive buffer:
    cc: 0, hiwat: 16384, lowat: 1, flags: none
  Send buffer:
    cc: 0, hiwat: 16384, lowat: 2048, flags:
  Sequence number state:
    iss: 0, snduna: 0, sndnxt: 0, sndwnd: 0
    irs: 0, rcvnxt: 0, rcvwnd: 0, sndcwnd: 512
  Timing parameters:
    srtt: 0 ms, rtt: 0 ms, rttv: 12000 ms, krtt: 3000 ms
    rttmin: 1000 ms, mss: 512, duration: 1390144100 ms
  State: LISTEN
  Flags: none
  Context: management
 
   
Local host: * (161), Foreign host: * (0)
  Protocol: tcp6, type: stream, ttl: 64, tos: 0, Id: 5
  Options: none, state: none
  Receive buffer:
    cc: 0, hiwat: 16384, lowat: 1, flags: none
  Send buffer:
    cc: 0, hiwat: 16384, lowat: 2048, flags:
  Sequence number state:
    iss: 0, snduna: 0, sndnxt: 0, sndwnd: 0
    irs: 0, rcvnxt: 0, rcvwnd: 0, sndcwnd: 1073725440
  Timing parameters:
    srtt: 0 ms, rtt: 0 ms, rttv: 12000 ms, krtt: 3000 ms
    rttmin: 1000 ms, mss: 1024, duration: 1390144100 ms
  State: LISTEN
  Flags: none
  Context: management
 
   
Local host: 10.10.233.74 (22), Foreign host: 10.10.185.189 (48131)
  Protocol: tcp, type: stream, ttl: 64, tos: 0, Id: 20
  Options: none, state: none
  Receive buffer:
    cc: 0, hiwat: 17500, lowat: 1, flags: none
  Send buffer:
    cc: 0, hiwat: 17500, lowat: 2048, flags:
  Sequence number state:
    iss: 3575780911, snduna: 3576001996, sndnxt: 3576001996, sndwnd: 32767
    irs: 905490047, rcvnxt: 905574926, rcvwnd: 17500, sndcwnd: 1953
  Timing parameters:
    srtt: 700 ms, rtt: 0 ms, rttv: 0 ms, krtt: 1000 ms
    rttmin: 1000 ms, mss: 500, duration: 1390101600 ms
  State: ESTABLISHED
  Flags: none
  Context: management
 
   
Local host: 10.10.233.74 (23), Foreign host: 10.10.22.107 (35030)
  Protocol: tcp, type: stream, ttl: 64, tos: 0, Id: 18
  Options: none, state: none
  Receive buffer:
    cc: 0, hiwat: 17500, lowat: 1, flags: none
  Send buffer:
    cc: 0, hiwat: 17500, lowat: 2048, flags:
  Sequence number state:
    iss: 3273730667, snduna: 3273793065, sndnxt: 3273793065, sndwnd: 32767
    irs: 3760023047, rcvnxt: 3760024636, rcvwnd: 17500, sndcwnd: 25095
  Timing parameters:
    srtt: 700 ms, rtt: 0 ms, rttv: 0 ms, krtt: 1000 ms
    rttmin: 1000 ms, mss: 500, duration: 467168700 ms
  State: ESTABLISHED
  Flags: none
  Context: management
 
   
Total number of udp sockets: 11
Active connections (including servers)
Local host: * (123), Foreign host: * (0)
  Protocol: udp6, type: dgram, ttl: 64, tos: 0, Id: 11
  Options: none, state: none
  Receive buffer:
    cc: 0, hiwat: 42240, lowat: 1, flags: none
  Send buffer:
    cc: 0, hiwat: 9216, lowat: 2048, flags:
  Context: management
 
   
Local host: * (123), Foreign host: * (0)
  Protocol: udp, type: dgram, ttl: 64, tos: 0x10, Id: 10
  Options: none, state: none
  Receive buffer:
    cc: 0, hiwat: 42240, lowat: 1, flags: none
  Send buffer:
    cc: 0, hiwat: 9216, lowat: 2048, flags:
  Context: management
 
   
Local host: * (161), Foreign host: * (0)
  Protocol: udp, type: dgram, ttl: 64, tos: 0, Id: 1
  Options: none, state:
  Receive buffer:
    cc: 0, hiwat: 131072, lowat: 1, flags: none
  Send buffer:
    cc: 0, hiwat: 131072, lowat: 2048, flags:
  Context: management
 
   
Local host: * (161), Foreign host: * (0)
  Protocol: udp6, type: dgram, ttl: 64, tos: 0, Id: 2
  Options: none, state:
  Receive buffer:
    cc: 0, hiwat: 131072, lowat: 1, flags: none
  Send buffer:
    cc: 0, hiwat: 131072, lowat: 2048, flags:
  Context: management
 
   
Local host: 127.0.0.1 (123), Foreign host: * (0)
  Protocol: udp, type: dgram, ttl: 64, tos: 0x10, Id: 12
  Options: none, state: none
  Receive buffer:
    cc: 0, hiwat: 42240, lowat: 1, flags: none
  Send buffer:
    cc: 0, hiwat: 9216, lowat: 2048, flags:
  Context: management
 
   
Local host: 127.0.0.1 (130), Foreign host: * (0)
  Protocol: udp, type: dgram, ttl: 64, tos: 0, Id: 9
  Options: none, state:
  Receive buffer:
    cc: 0, hiwat: 42240, lowat: 1, flags: none
  Send buffer:
    cc: 0, hiwat: 9216, lowat: 2048, flags:
  Context: management
 
   
Local host: 127.0.0.1 (27613), Foreign host: 127.0.0.1 (123)
  Protocol: udp, type: dgram, ttl: 64, tos: 0, Id: 8
  Options: , state: none
  Receive buffer:
    cc: 0, hiwat: 42240, lowat: 1, flags:
  Send buffer:
    cc: 0, hiwat: 9216, lowat: 2048, flags:
  Context: management
 
   
 
   
Total number of raw sockets: 0

Related Commands

Command
Description

show telnet server

Displays the Telnet server configuration.

show tcp client

Displays information about the TCP client.

show tcp statistics

Displays TCP protocol statistics.


show tcp statistics

To display TCP protocol statistics, use the show tcp statistics command.

show tcp statistics [all | tcp4 | tcp6 | tcpsum | udp4 | udp6 | udpsum | raw4 | raw6 | rawsum]

Syntax Description

all

(Optional) Specifies all TCPv4, TCPv6, UDPv4, UDPv6, RAWv4, and RAWv6 protocol statistics.

tcp4

(Optional) Specifies TCPv4 protocol statistics.

tcp6

(Optional) Specifies TCPv6 protocol statistics.

tcpsum

(Optional) Specifies the sum of TCPv4 and TCPv6 protocols statistics.

udp4

(Optional) Specifies UDPv4 protocol statistics.

udp6

(Optional) Specifies UDPv6 protocol statistics.

udpsum

(Optional) Specifies the sum of UDPv4 and UDPv6 protocols statistics.

raw4

(Optional) Specifies RAWv4 protocol statistics.

raw6

(Optional) Specifies RAWv6 protocol statistics.

rawsum

(Optional) Specifies the sum of RAWv4 and RAWv6 protocols statistics.


Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display TCP protocol statistics:

switch# show tcp statistics
TCP Received:
        479908 packets total
        0 checksum error, 0 bad offset, 0 too short, 0 MD5 error
        232451 packets (72213943 bytes) in sequence
        195 duplicate packets (192 bytes)
        0 partially dup packets (0 bytes)
        8652 out-of-order packets (0 bytes)
        0 packets (0 bytes) with data after window
        2 packets after close
        0 window probe packets, 0 window update packets
        44339 duplicate ack packets, 0 ack packets with unsent data
        252581 ack packets (103465405 bytes)
TCP Sent:
        533421 total, 0 urgent packets
        94694 control packets
        326430 data packets (105082025 bytes)
        90 data packets (22114 bytes) retransmitted
        105144 ack only packets
        34 window probe packets, 7029 window update packets
TCP:
44330 connections initiated, 6715 connections accepted, 50669 connections established
51045 connections closed (including 165 dropped, 376 embryonic dropped)
3067 total rxmt timeout, 0 connections dropped in rxmt timeout
463 keepalive timeout, 92 keepalive probe, 371 connections dropped in keepalive
 
   

Related Commands

Command
Description

show tcp connection

Displays information about the TCP connection.

show tcp client

Displays information about the TCP client.


show tech-support

To collect switch information for Cisco TAC to assist you in diagnosing issues, use the show tech-support command.

show tech-support {nexus1010 | ipv6 | svs | aaa}

Syntax Description

nexus1010

Gathers technical support information regarding the Cisco Nexus 1010.

ipv6

Displays IPv6 information, such as IPv6 static routes and traffic statistics.

svs

Displays SVS information, such as interface and software configurations.

aaa

Displays Authentication, Authorization and Accounting (AAA) events and statistical information.


Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to collect switch information for Cisco TAC regarding IPv6 issues:

switch# show tech-support nexus1010
`show hardware`
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
 
   
Software
  loader:    version unavailable [last: image booted through mgmt0]
  kickstart: version 4.0(4)SP1(1)
  system:    version 4.0(4)SP1(1)
  kickstart image file is:
  kickstart compile time:  4/4/2010 22:00:00
  system image file is:    bootflash:/nexus-1010-mz.4.0.4.SP1.1.bin
  system compile time:     4/4/2010 22:00:00 [04/05/2010 11:15:52]
 
   
Hardware
  Cisco Nexus 1010 Chassis ("Cisco Nexus1010 Chassis")
   with 14666752 kB of memory.
  Device name: cppa-mgr
  bootflash:    3897832 kB
  Disk Storage capacity for VM virtual disks: 346335 GB
  Number of physical 1Gbps ethernet ports: 6
  Number of CPU Cores: 12
  CPU Cores details:
  model name    : Intel(R) Xeon(R) CPU           E5520  @ 2.27GHz
  model name    : Intel(R) Xeon(R) CPU           E5520  @ 2.27GHz
  model name    : Intel(R) Xeon(R) CPU           E5520  @ 2.27GHz
  model name    : Intel(R) Xeon(R) CPU           E5520  @ 2.27GHz
  model name    : Intel(R) Xeon(R) CPU           E5520  @ 2.27GHz
  model name    : Intel(R) Xeon(R) CPU           E5520  @ 2.27GHz
  model name    : Intel(R) Xeon(R) CPU           E5520  @ 2.27GHz
  model name    : Intel(R) Xeon(R) CPU           E5520  @ 2.27GHz
  model name    : Intel(R) Xeon(R) CPU           E5520  @ 2.27GHz
  model name    : Intel(R) Xeon(R) CPU           E5520  @ 2.27GHz
  model name    : Intel(R) Xeon(R) CPU           E5520  @ 2.27GHz
  model name    : Intel(R) Xeon(R) CPU           E5520  @ 2.27GHz
 
   
 
   
Kernel uptime is 2 day(s), 15 hour(s), 25 minute(s), 34 second(s)
 
   
 
   
plugin
  Core Plugin, Ethernet Plugin
--------------------------------
Switch hardware ID information
--------------------------------
 
   
Switch is booted up
  Switch type is : Nexus 1010 Chassis
  Model number is Nexus 1010
  Manufacture date is 03/09/2010
  PID-VID-SN: R200-1120402-.-3536887121268865265
  UUID is 208F4277-020F-BADB-ADBE-A80000DEAD00
 
   
--------------------------------
Chassis has 2 Module slots
--------------------------------
 
   
Module1  ok
  Module type is : Cisco Nexus1010 Chassis
  0 submodules are present
  Model number is Nexus 1010
  H/W version is .
  Manufacture Date is Year 0 Week 3
  Serial number is T023D741D01
 
   
Module2  ok
  Module type is : Cisco Nexus1010 Chassis
  0 submodules are present
  Model number is Nexus 1010
  H/W version is .
  Manufacture Date is Year 0 Week 3
  Serial number is T023D741D81
 
   
`show system internal resources`
Load Average:  1 minute: 0.07   5 minutes: 0.02  15 minutes: 0.00
Processes   :  168 total, 1 running
CPU States  :   0.2  user,  0.0  kernel, 99.8 idle
Memory Usage:  16323844K total, 2605340K used, 13718504K free
               416K buffers, 518240K cache
Repository  :    121115568K total, 554484K used (1-percent), 114457188K free
Storage     :   362335928K total, 983828K used (1-percent), 343091420K free
`show virtual-service-blade summary`
 
   
-------------------------------------------------------------------------------
Name                Role        State                    Nexus1010-Module
-------------------------------------------------------------------------------
vsm-1               PRIMARY     VSB POWERED ON           Nexus1010-PRIMARY
vsm-1               SECONDARY   VSB POWERED ON           Nexus1010-SECONDARY
`show virtual-service-blade `
virtual-service-blade vsm-1
  Description:
  Slot id:        1
  Host Name:      vsm-1
  Management IP:  10.78.108.40
  VSB Type Name :  VSM-1.0
  Interface:          control    vlan:   1044
  Interface:       management    vlan:   1032
  Interface:           packet    vlan:   1045
  Interface:         internal    vlan:     NA
  Ramsize:        2048
  Disksize:       3
  Heartbeat:      127579
  HA Admin role: Primary
    HA Oper role: STANDBY
    Status:       VSB POWERED ON
    Location:     PRIMARY
    SW version:   4.0(4)SP1(1)
  HA Admin role: Secondary
    HA Oper role: ACTIVE
    Status:       VSB POWERED ON
    Location:     SECONDARY
    SW version:   4.0(4)SP1(1)
  VSB Info:
    Domain ID : 1054
 
   
`show network`
GigabitEthernet1 is up
  Hardware: Ethernet, address: 0022.bdcd.cfde (bia 0022.bdcd.cfde)
  MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
    reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA
  full-duplex, 1000 Mb/s
  Auto-Negotiation is turned on
    474204 packets input, 76658996 bytes
    13376 multicast frames, 0 compressed
    0 input errors, 0 frame, 0 overrun, 0 fifo
    2 packets output, 168 bytes
    0 underrun, 0 output errors, 0 collisions
    0 fifo, 0 carrier errors
 
   
GigabitEthernet2 is up
  Hardware: Ethernet, address: 0022.bdcd.cfde (bia 0022.bdcd.cfde)
  MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
    reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA
  full-duplex, 1000 Mb/s
  Auto-Negotiation is turned on
    5616986 packets input, 695991717 bytes
    3651124 multicast frames, 0 compressed
    0 input errors, 0 frame, 0 overrun, 0 fifo
    2019700 packets output, 536582585 bytes
    0 underrun, 0 output errors, 0 collisions
    0 fifo, 0 carrier errors
 
   
GigabitEthernet3 is up
  Hardware: Ethernet, address: 0010.185b.fdd8 (bia 0010.185b.fdd8)
  MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
    reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA
  full-duplex, 1000 Mb/s
  Auto-Negotiation is turned on
    8709 packets input, 1087172 bytes
    7622 multicast frames, 0 compressed
    0 input errors, 0 frame, 0 overrun, 0 fifo
    7622 packets output, 975374 bytes
    0 underrun, 0 output errors, 0 collisions
    0 fifo, 0 carrier errors
 
   
GigabitEthernet4 is up
  Hardware: Ethernet, address: 0010.185b.fdd8 (bia 0010.185b.fdd8)
  MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
    reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA
  full-duplex, 1000 Mb/s
  Auto-Negotiation is turned on
    8711 packets input, 1087000 bytes
    7617 multicast frames, 0 compressed
    0 input errors, 0 frame, 0 overrun, 0 fifo
    7617 packets output, 974976 bytes
    0 underrun, 0 output errors, 0 collisions
    0 fifo, 0 carrier errors
 
   
GigabitEthernet5 is up
  Hardware: Ethernet, address: 0010.185b.fdd8 (bia 0010.185b.fdd8)
  MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
    reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA
  full-duplex, 1000 Mb/s
  Auto-Negotiation is turned on
    8861 packets input, 1097728 bytes
    7616 multicast frames, 0 compressed
    0 input errors, 0 frame, 0 overrun, 0 fifo
    7616 packets output, 974848 bytes
    0 underrun, 0 output errors, 0 collisions
    0 fifo, 0 carrier errors
 
   
GigabitEthernet6 is up
  Hardware: Ethernet, address: 0010.185b.fdd8 (bia 0010.185b.fdd8)
  MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
    reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA
  full-duplex, 1000 Mb/s
  Auto-Negotiation is turned on
    8863 packets input, 1097612 bytes
    7616 multicast frames, 0 compressed
    0 input errors, 0 frame, 0 overrun, 0 fifo
    7616 packets output, 974848 bytes
    0 underrun, 0 output errors, 0 collisions
    0 fifo, 0 carrier errors
 
   
PortChannel1 is up
  Hardware: Ethernet, address: 0022.bdcd.cfde (bia 0022.bdcd.cfde)
  MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
    reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA
  full-duplex, 1000 Mb/s
  Auto-Negotiation is turned on
    6091191 packets input, 772651337 bytes
    3664500 multicast frames, 0 compressed
    0 input errors, 0 frame, 0 overrun, 0 fifo
    2019702 packets output, 536582753 bytes
    0 underrun, 0 output errors, 0 collisions
    0 fifo, 0 carrier errors
 
   
PortChannel2 is up
  Hardware: Ethernet, address: 0010.185b.fdd8 (bia 0010.185b.fdd8)
  MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
    reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA
  full-duplex, 1000 Mb/s
  Auto-Negotiation is turned on
    35144 packets input, 4369512 bytes
    30471 multicast frames, 0 compressed
    0 input errors, 0 frame, 0 overrun, 0 fifo
    30471 packets output, 3900046 bytes
    0 underrun, 0 output errors, 0 collisions
    0 fifo, 0 carrier errors
 
   
VbEthernet1/1 is up
  Hardware: Ethernet, address: 0002.3d74.1d83 (bia 0002.3d74.1d83)
  MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
    reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA
  full-duplex, 1000 Mb/s
  Auto-Negotiation is turned on
    1007113 packets input, 267568821 bytes
    0 multicast frames, 0 compressed
    0 input errors, 0 frame, 0 overrun, 0 fifo
    1091173 packets output, 236791139 bytes
    0 underrun, 0 output errors, 0 collisions
    0 fifo, 0 carrier errors
 
   
VbEthernet1/2 is up
  Hardware: Ethernet, address: 0002.3d74.1d82 (bia 0002.3d74.1d82)
  MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
    reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA
  full-duplex, 1000 Mb/s
  Auto-Negotiation is turned on
    2634 packets input, 525675 bytes
    0 multicast frames, 0 compressed
    0 input errors, 0 frame, 0 overrun, 0 fifo
    117582 packets output, 7936300 bytes
    0 underrun, 0 output errors, 0 collisions
    0 fifo, 0 carrier errors
 
   
VbEthernet1/3 is up
  Hardware: Ethernet, address: 0002.3d74.1d84 (bia 0002.3d74.1d84)
  MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
    reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA
  full-duplex, 1000 Mb/s
  Auto-Negotiation is turned on
    0 packets input, 0 bytes
    0 multicast frames, 0 compressed
    0 input errors, 0 frame, 0 overrun, 0 fifo
    113563 packets output, 7268200 bytes
    0 underrun, 0 output errors, 0 collisions
    0 fifo, 0 carrier errors
 
   
`show redundancy status`
Redundancy mode
---------------
      administrative:   HA
         operational:   HA
 
   
This supervisor (sup-2)
-----------------------
    Redundancy state:   Active
    Supervisor state:   Active
      Internal state:   Active with HA standby
 
   
Other supervisor (sup-1)
------------------------
    Redundancy state:   Standby
 
   
    Supervisor state:   HA standby
      Internal state:   HA standby
 
   
System start time:          Wed Mar 17 23:17:15 2010
 
   
System uptime:              2 days, 15 hours, 26 minutes, 41 seconds
Kernel uptime:              2 days, 15 hours, 26 minutes, 26 seconds
Active supervisor uptime:   1 days, 11 hours, 27 minutes, 17 seconds
`show system internal redundancy status`
MyState:RDN_ST_AC
Other State:RDN_ST_SB
Other state from reg:RDN_ST_SB(3)
State:RDN_DRV_ST_AC_SB
Slot:2
Num failures to send MTS message:0
`show system internal redundancy info`
My CP:
  slot: 1
  domain: 1053
  role:   secondary
  status: RDN_ST_AC
  state:  RDN_DRV_ST_AC_SB
  intr:   enabled
  power_off_reqs: 0
  reset_reqs:     1
Other CP:
  slot: 0
  status: RDN_ST_SB
  active: true
  ver_rcvd: true
  degraded_mode: false
Redun Device 0:
  name: ha0
  pdev: eda54240
  alarm: false
  mac: 00:02:3d:74:1d:00
  tx_set_ver_req_pkts:   291
  tx_set_ver_rsp_pkts:   3
  tx_heartbeat_req_pkts: 127356
  tx_heartbeat_rsp_pkts: 100709
  rx_set_ver_req_pkts:   3
  rx_set_ver_rsp_pkts:   0
  rx_heartbeat_req_pkts: 100709
  rx_heartbeat_rsp_pkts: 127349
  rx_drops_wrong_domain: 0
  rx_drops_wrong_slot:   0
  rx_drops_short_pkt:    0
  rx_drops_queue_full:   0
  rx_drops_inactive_cp:  0
  rx_drops_bad_src:      0
  rx_drops_not_ready:    0
  rx_unknown_pkts:       0
Redun Device 1:
  name: ha1
  pdev: ed9d3ac0
  alarm: true
  mac: ff:ff:ff:ff:ff:ff
  rx_unknown_pkts:       0
Redun Device 1:
  name: ha1
  pdev: ed9d3ac0
  alarm: true
  mac: ff:ff:ff:ff:ff:ff
  tx_set_ver_req_pkts:   281
  tx_set_ver_rsp_pkts:   1
  tx_heartbeat_req_pkts: 3
  tx_heartbeat_rsp_pkts: 1
  rx_set_ver_req_pkts:   1
  rx_set_ver_rsp_pkts:   0
  rx_heartbeat_req_pkts: 1
  rx_heartbeat_rsp_pkts: 0
  rx_drops_wrong_domain: 0
  rx_drops_wrong_slot:   0
  rx_drops_short_pkt:    0
  rx_drops_queue_full:   0
  rx_drops_inactive_cp:  0
  rx_drops_bad_src:      0
  rx_drops_not_ready:    0
  rx_unknown_pkts:       0
switch#
 
   

Related Commands

Command
Description

show logging logfile

Displays the contents of the log file.

logging logfile

Configures the log file used to store system messages.


show telnet server

To display the Telnet server configuration, use the show telnet server command.

show telnet server

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display the Telnet server configuration:

switch# show telnet server
telnet service enabled
switch#

Related Commands

Command
Description

show tcp connection

Displays information about the connection.

telnet

Uses Telnet to connect to another system.


show terminal

To display the terminal settings for the current session, use the show terminal command.

show terminal

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display the terminal settings for the current session:

switch# show terminal
TTY: /dev/pts/8 type: "vt100"
Length: 24 lines, Width: 88 columns
Session Timeout: None
switch#

Related Commands

Command
Description

terminal terminal-type

Sets the terminal type.

terminal length

Sets the number of lines on the screen.

terminal width

Sets the width of the display terminal.

line console

Puts you in console configuration mode.

line vty

Puts you in line configuration mode.


show user-account

To display user account configuration, use the show user-account command.

show user-account [username]

Syntax Description

username

(Optional) Name of a user with an existing account.


Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display user account configuration for the user named NewUser:

switch(config)# show user-account NewUser
user:NewUser
this user account has no expiry date
roles:network-operator network-admin
switch(config)#
 
   

Related Commands

Command
Description

role name

Names a user role and places you in role configuration mode for that role.

show users

Displays the current users logged in the system.


show users

To display information about the user session, use the show users command.

show users

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display information about the user session:

switch# show users
NAME     LINE         TIME         IDLE          PID COMMENT
admin    pts/17       Dec 16 06:37   .         30406 (172.28.254.254) session=ss
 
   
h
admin    pts/18       Jan  3 19:01   .          3847 (sjc-vpn5-786.cisco.com) *
switch#

Related Commands

Command
Description

show user-account

Displays the new user account configuration.

role name

Names a user role and places you in role configuration mode for that role.


show version

To display the versions of system software and hardware that are currently running on the switch, use the show version command.

show version [module]

Syntax Description

module

(Optional) Specifies the software version of a module.


Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display the versions of system software and hardware that are currently running on the switch:

switch# show version
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2009, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
 
   
Software
  loader:    version 1.2(2) [last: image booted through mgmt0]
  kickstart: version 4.0(4)SP1(1)
  system:    version 4.0(4)SP1(1)
  kickstart image file is:
  kickstart compile time:  9/22/2009 2:00:00
  system image file is:    bootflash:/nexus-1000v-mz.4.0.4.SV1.2.bin
  system compile time:     9/22/2009 2:00:00 [10/07/2009 10:11:01]
 
   
Software
  loader:    version 1.2(2) [last: image booted through mgmt0]
  kickstart: version 4.0(4)SP1(1)
  system:    version 4.0(4)SP1(1)
  kickstart image file is:
  kickstart compile time:  9/22/2009 2:00:00
  system image file is:    bootflash:/nexus-1000v-mz.4.0.4.SV1.2.bin
  system compile time:     9/22/2009 2:00:00 [10/07/2009 10:11:01]
 
   
Hardware
  Cisco Nexus 1000V Chassis ("Virtual Supervisor Module")
  Intel(R) Xeon(R) CPU         with 2075012 kB of memory.
  Processor Board ID T5056B645A8
 
   
  Device name: n1000v
  bootflash:    2332296 kB
 
   
Kernel uptime is 79 day(s), 0 hour(s), 24 minute(s), 55 second(s)
 
   
plugin
  Core Plugin, Ethernet Plugin
switch#

Related Commands

Command
Description

show version image

Displays the versions of system software and hardware that are currently running on the switch.

show running-config diff

Displays the difference between the startup configuration and the running configuration currently on the switch.


show version image

To display the software version of a given image, use the show version command.

show version image {bootflash: URI | volatile: URI}

Syntax Description

bootflash:

Specifies bootflash as the directory name.

URI

URI of the system where the image resides.

volatile:

Specifies volatile as the directory name.


Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display the versions of system software and hardware that are currently running on the switch:

switch# show version image bootflash:isan.bin
   image name: nexus-1000v-mz.4.0.4.SV1.1.bin
   bios: version unavailable
   system: version 4.0(4)SV1(1)
   compiled: 4/2/2009 23:00:00 [04/23/2009 09:55:29]
switch#

Related Commands

Command
Description

show version

Displays the software version of a given image.

show running-config diff

Displays the difference between the startup configuration and the running configuration currently on the switch.


show virtual-service-blade

To display information about virtual services, use the show virtual-service-blade command.

show virtual-service-blade [name vsb-name | summary]

Syntax Description

name

Specifies the name of a virtual service.

vsb-name

Name of an existing virtual service.

summary

Specifies summary information about all virtual services, such as their role, state, and module.


Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display information about the virtual service named VSM-1:

switch# show virtual-service-blade name VSM-1

virtual-service-blade VSM-1

Description:

Slot id: 1

Host Name:

Management IP:

VSB Type Name : VSM_SV1_3

Interface: control vlan: 281

Interface: management vlan: 231

Interface: packet vlan: 282

Interface: internal vlan: NA

Ramsize: 2048

Disksize: 3

Heartbeat: 0

virtual-service-blade:

HA Oper role: NONE

Status: VSB NOT PRESENT

Location: SECONDARY

SW version:

VSB Info:

switch#

Related Commands

Command
Description

show network

Displays information about the network.

show virtual-service-blade-
type summary

Displays a summary of all virtual service configurations by type, such as Virtual Supervisor Module (VSM) or Network Analysis and Monitoring (NAM).


show virtual-service-blade-type summary

To display a summary of all virtual service configurations by type, such as Virtual Supervisor Module (VSM) or Network Analysis and Monitoring (NAM), use the show virtual-service-blade-type summary command.

show virtual-service-blade-type summary

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display a summary of all virtual service configurations by type:

switch# show virtual-service-blade-type summary

-------------------------------------------------------------------------------

Virtual-Service-Blade-Type Virtual-Service-Blade

-------------------------------------------------------------------------------

VSM_SV1_3 VSM-1

VSM-2

VSM-3

VSM-4

NAM-MV NAM

switch#

Related Commands

Command
Description

show network

Displays information about the network.

show virtual-service-blade

Displays information about virtual services.


show virtual-service-domain brief

To display a list of the Virtual Service Domains (VSDs) currently configured in a Virtual Supervisor Module (VSM), including VSD names and port profiles, use the show virtual-service-domain brief command.

show virtual-service-domain brief

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operatorr

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display a list of the VSDs currently configured in a VSM:

switch# show virtual-service-domain brief
Name             default action    in-ports    out-ports   mem-ports
vsd1             drop              1           1           4
vsd2             forward           1           1           0
vsim-cp# sho virtual-service-domain interface
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Name             Interface             Type      Status
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
vsd1             Vethernet1            Member    Active
vsd1             Vethernet2            Member    Active
vsd1             Vethernet3            Member    Active
vsd1             Vethernet6            Member    Active
vsd1             Vethernet7            Inside    Active
vsd1             Vethernet8            Outside   Active
vsd2             Vethernet9            Inside    Active
vsd2             Vethernet10           Outside   Active
vsim-cp# show virtual-service-domain name vsd1
Default Action: drop
___________________________
Interface        Type
___________________________
Vethernet1       Member
Vethernet2       Member
Vethernet3       Member
Vethernet6       Member
Vethernet7       Inside
Vethernet8       Outside
 
switch#
 
   

Related Commands

Command
Description

virtual-service-domain

Creates a Virtual Service Domain (VSD) that classifies and separates traffic for network services.


show virtual-service-domain interface

To display the interfaces currently assigned to the Virtual Service Domains (VSDs) in a Virtual Supervisor Module (VSM), use the show virtual-service-domain interface command.

show virtual-service-domain interface

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display the interfaces currently assigned to the VSDs in a VSM:

switch# show virtual-service-domain interface
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Name             Interface             Type      Status
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
vsd1             Vethernet1            Member    Active
vsd1             Vethernet2            Member    Active
vsd1             Vethernet3            Member    Active
vsd1             Vethernet6            Member    Active
vsd1             Vethernet7            Inside    Active
vsd1             Vethernet8            Outside   Active
vsd2             Vethernet9            Inside    Active
vsd2             Vethernet10           Outside   Active
 
   

Related Commands

Command
Description

virtual-service-domain

Creates a virtual service domain that classifies and separate traffic for network services.


show virtual-service-domain name

To display a specific Virtual Service Domain (VSD) currently configured in a Virtual Supervisor Module (VSM), including associated port profiles, use the show virtual-service-domain name command.

show virtual-service-domain name virtual-service-domain_name

Syntax Description

virtual-service-domain_name

Name of the VSD.


Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display a specific VSD configuration:

switch# show virtual-service-domain name vsd1
Default Action: drop
___________________________
Interface        Type
___________________________
Vethernet1       Member
Vethernet2       Member
Vethernet3       Member
Vethernet6       Member
Vethernet7       Inside
Vethernet8       Outside
 
switch#
 
   

Related Commands

Command
Description

virtual-service-domain

Creates a virtual service domain that classifies and separate traffic for network services.


show xml server status

To display information about XML server settings and any active XML server sessions, use the show xml server status command.

show xml server status

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

Any command mode

Supported User Roles

network-admin

Command History

Release
Modification

4.0(4)SP1(1)

This command was introduced.


Examples

This example shows how to display information about XML server settings and any active XML server sessions:

switch# show xml server status
operational status is enabled
maximum session configured is 8
switch# 

Related Commands

Command
Description

xml server max-session

Sets the number of allowed XML server sessions.

xml server terminate session

Terminates the specified XML server session.