High Availability and Redundancy Configuration Guide, Cisco DCNM for SAN, Release 6.x
Preface
Downloads: This chapterpdf (PDF - 101.0KB) The complete bookPDF (PDF - 574.0KB) | Feedback

Preface

Table Of Contents

Preface

Audience

Organization

Document Conventions

Related Documentation

Release Notes

Regulatory Compliance and Safety Information

Compatibility Information

Hardware Installation

Software Installation and Upgrade

Cisco NX-OS

Cisco DCNM-SAN

Cisco DCNM

Command-Line Interface

Intelligent Storage Networking Services Configuration Guides

Troubleshooting and Reference

Obtaining Documentation and Submitting a Service Request


Preface


This preface describes the audience, organization, and conventions of the High Availability and Redundancy Configuration Guide, Cisco DCNM for SAN. It also provides information on how to obtain related documentation.

Audience

This guide is for experienced network administrators who are responsible for configuring and maintaining the Cisco MDS 9000 Family of multilayer directors and fabric switches.

Organization

This guide is organized as follows:

Chapter 1

High Availability Overview

Provides an overview of high availability and redundancy features.

Chapter 2

Configuring High Availability

Describes how to configure the high availability feature, including switchover processes.


Document Conventions

Command descriptions use these conventions:

boldface font

Commands and keywords are in boldface.

italic font

Arguments for which you supply values are in italics.

[ ]

Elements in square brackets are optional.

[ x | y | z ]

Optional alternative keywords are grouped in brackets and separated by vertical bars.


Screen examples use these conventions:

screen font

Terminal sessions and information the switch displays are in screen font.

boldface screen font

Information you must enter is in boldface screen font.

italic screen font

Arguments for which you supply values are in italic screen font.

< >

Nonprinting characters, such as passwords, are in angle brackets.

[ ]

Default responses to system prompts are in square brackets.

!, #

An exclamation point (!) or a pound sign (#) at the beginning of a line of code indicates a comment line.


This document uses the following conventions:


Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the manual.



Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.

Related Documentation

The documentation set for the Cisco MDS 9000 Family includes the following documents. To find a document online, use the Cisco MDS NX-OS Documentation Locator at:

http://www.cisco.com/en/US/docs/storage/san_switches/mds9000/roadmaps/doclocater.htm

Release Notes

Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Releases

Cisco MDS 9000 Family Release Notes for MDS SAN-OS Releases

Cisco MDS 9000 Family Release Notes for Cisco MDS 9000 EPLD Images

Cisco DCNM Release Notes

Regulatory Compliance and Safety Information

Regulatory Compliance and Safety Information for the Cisco MDS 9000 Family

Compatibility Information

Cisco Data Center Interoperability Support Matrix

Cisco MDS 9000 NX-OS Hardware and Software Compatibility Information and Feature Lists

Cisco MDS 9000 Family Switch-to-Switch Interoperability Configuration Guide

Hardware Installation

Cisco MDS 9500 Series Hardware Installation Guide

Cisco MDS 9200 Series Hardware Installation Guide

Cisco MDS 9100 Series Hardware Installation Guide

Cisco MDS 9124 and Cisco MDS 9134 Multilayer Fabric Switch Quick Start Guide

Software Installation and Upgrade

Cisco MDS 9000 NX-OS Software Upgrade and Downgrade Guide

Cisco NX-OS

Cisco MDS 9000 Family NX-OS Licensing Guide

Cisco MDS 9000 Family NX-OS Fundamentals Configuration Guide

Cisco MDS 9000 Family NX-OS System Management Configuration Guide

Cisco MDS 9000 Family NX-OS Interfaces Configuration Guide

Cisco MDS 9000 Family NX-OS Fabric Configuration Guide

Cisco MDS 9000 Family NX-OS Quality of Service Configuration Guide

Cisco MDS 9000 Family NX-OS Security Configuration Guide

Cisco MDS 9000 Family NX-OS IP Services Configuration Guide

Cisco MDS 9000 Family NX-OS Intelligent Storage Services Configuration Guide

Cisco MDS 9000 Family NX-OS High Availability and Redundancy Configuration Guide

Cisco MDS 9000 Family NX-OS Inter-VSAN Routing Configuration Guide

Cisco MDS 9000 Family Cookbook for Cisco MDS SAN-OS

Cisco DCNM-SAN

Cisco DCNM Fundamentals Guide, Release 6.x

System Management Configuration Guide, Cisco DCNM for SAN, Release 6.x

Interfaces Configuration Guide, Cisco DCNM for SAN, Release 6.x

Fabric Configuration Guide, Cisco DCNM for SAN, Release 6.x

Quality of Service Configuration Guide, Cisco DCNM for SAN, Release 6.x

Security Configuration Guide, Cisco DCNM for SAN, Release 6.x

IP Services Configuration Guide, Cisco DCNM for SAN, Release 6.x

Intelligent Storage Services Configuration Guide, Cisco DCNM for SAN, Release 6.x

High Availability and Redundancy Configuration Guide, Cisco DCNM for SAN, Release 6.x

Inter-VSAN Routing Configuration Guide, Cisco DCNM for SAN, Release 6.x

SMI-S and Web Services Programming Guide, Cisco DCNM for SAN, Release 6.x

Cisco DCNM

The following publications support both Cisco DCNM for LAN and DCNM for SAN, and address the new licensing model, the new installation process, and the new features of Cisco DCNM:

Cisco DCNM Fundamentals Guide, Release 6.x

Cisco DCNM Installation Guide, Release 6.x

Command-Line Interface

Cisco MDS 9000 Family Command Reference

Intelligent Storage Networking Services Configuration Guides

Cisco MDS 9000 Family I/O Acceleration Configuration Guide

Cisco MDS 9000 Family SANTap Deployment Guide

Cisco MDS 9000 Family Data Mobility Manager Configuration Guide

Cisco MDS 9000 Family Storage Media Encryption Configuration Guide

Troubleshooting and Reference

Cisco MDS 9000 Family and Nexus 7000 Series System Messages Reference

Cisco MDS 9000 Family SAN-OS Troubleshooting Guide

Cisco MDS 9000 Family NX-OS MIB Quick Reference

Cisco DCNM for SAN Database Schema Reference

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.