Cisco Fabric Manager Configuration Guides Master Index
Available Languages
Table Of Contents
Symbols - Numerics - A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Z
Master Index
The following MDS NX-OS configuration guide abbreviations are used in the Master Index.
•
IOA- I/O Accelerator Configuration Guide
•
•
•
•
•
•
•
Symbols
* (asterisk)
autolearned entries sec:9-20
port security wildcard sec:9-15
port security wildcards sec:9-15
Numerics
12-port 4-Gbps switching modules
BB_credit buffers Intf:6-12
configuration guidelines Intf:5-17
default settings Intf:5-30
16-port switching modules
configuring BB_credits Intf:6-1
LEDs Intf:2-16
24-port 4-Gbps switching modules
bandwidth fairness Intf:5-24
configuration guidelines Intf:5-16
default settings Intf:5-30
example configurations Intf:6-11
oversubscription Intf:5-20
shared resources Intf:5-10
24-port 8-Gbps switching modules
default settings Intf:5-30
example configurations Intf:6-7
32-port switching modules
configuring BB_credits Intf:6-1
SPAN guidelines sysmgnt:10-6
3DES encryption
IKE sec:7-7
IPsec sec:7-6
4/44-port 8-Gbps switching modules
default settings Intf:5-30
example configurations Intf:6-8
48-port 4-Gbps switching modules
bandwidth fairness Intf:5-24
configuration guidelines Intf:5-16
default settings Intf:5-30
example configurations Intf:6-9
oversubscription Intf:5-20
shared resources Intf:5-10
48-port 8-Gbps switching modules
default settings Intf:5-30
example configurations Intf:6-6
4-port 10-Gbps switching modules
BB_credit buffers Intf:6-13
configuration guidelines Intf:5-18
default settings Intf:5-30
A
AAA
authentication process sec:4-6
authorization process sec:4-6
configuring information Fund:7-59
default settings sec:4-37
description sec:4-1
DHCHAP authentication sec:8-10
distributing with CFS (procedure) sec:4-30
enabling server distribution sec:4-28
local services sec:4-33
remote services sec:4-4
setting authentication sec:4-33
starting a distribution session sec:4-29
AAA authentication
configuring ipsvc:2-29, ipsvc:2-30
AAA servers
groups sec:4-4
monitoring sec:4-5
remote authentication sec:4-4
access control
enforcingiSCSI
enforcing access control ipsvc:2-28
iSCSI ipsvc:2-25, ipsvc:2-27
Access Control Lists. See IPv4-ACLs; IPv6-ACLs
access controlzoning based access controliSCSI
zoning based access control ipsvc:2-28
accounting
viewing lists Fund:7-10
ACL based access control
configuring for iSCSI ipsvc:2-27
ACLs
configuring for iSCSI ipsvc:2-27
adapters
Fibre Channel-to-Ethernet Fund:9-2
adminDown tooltip Fund:13-14
administrative speeds
configuring Intf:2-12
administrative states
description Intf:2-8
setting Intf:2-11
administrator passwords
default Fund:2-5
recovering (procedure sec:3-21
Admin tab
description Fund:7-50
advanced
IVR configuration IVR:2-1
IVR zone zones and zone sets IVR:2-13
Advanced Encrypted Standard encryption. See AES encryption
advertised interfaces ipsvc:2-13
advertisement packets
setting time intervals ipsvc:5-13
AES encryption
description sysmgnt:6-4
IKE sec:7-7
IPsec sec:7-6
SNMP support sysmgnt:6-4
AES-XCBC-MAC
IPsec sec:7-7
AFIDs
configuring default IVR:2-5
configuring individual IVR:2-5
description IVR:1-3, IVR:2-4, IVR:2-8
guidelines IVR:2-4
aliases
switching between global device aliases and fcaliases Fund:3-12
using as enclosure names Fund:5-38, Fund:5-39
using with Fabric Manager Fund:3-12
ALPA caches
clearing Fund:B-2
description Intf:2-22
displaying contents Fund:B-2
ANSI T11 FC-GS-3
support Fund:2-17
applications
management Fund:2-17
ARP caches
clearing Fund:B-2
displaying Fund:B-2
authentication
CHAP option ipsvc:2-58
configuring local with Device Manager ipsvc:2-31
Fabric Manager Web Services Fund:4-4
fabric security sec:8-1
guidelines sec:4-4
iSCSI setup ipsvc:2-57
local ipsvc:2-31, sec:4-3
MD5 ipsvc:5-14
mechanism ipsvc:2-30
mutual CHAPmutual CHAP authentication ipsvc:2-32
restricting iSLB initiatorinitiator authentication
restrictingiSLB
simple text ipsvc:5-14
user IDs sec:4-3
See also simple text authentication
authentication, authorization, and accounting. See AAA
authorization
rule placement order sec:3-5
autogenerated iSCSI targetiSCSI
autogenerated target ipsvc:2-29
auto-negotiation
configuring Gigabit Ethernet interfaces ipsvc:6-6, ipsvc:7-3
autonomous fabric ID
autonomous fabric identifiers. See AFIDs
AutoNotify
description sysmgnt:4-5
auto port mode
description Intf:2-7
interface configuration Intf:2-3
autosensing speed
Generation 2 switching modules Intf:2-13
auto topology mode
configuration guidelines IVR:1-10
enabling IVR:1-12
B
bandwidth fairness
disabling Intf:5-26
enabling Intf:5-24
Generation 2 switching modules Intf:5-24
basic
IVR configuration IVR:1-1
basic configuration
task list IVR:1-5
BB_credit buffers
12-port 4-Gbps switching module allocations Intf:6-12
12-port 4-Gbps switching module considerations Intf:6-12
24-port 4-Gbps switching module allocations Intf:6-10
24-port 4-Gbps switching module considerations Intf:6-11, Intf:6-12
24-port 8-Gbps switching module considerations Intf:6-7
4/44-port 8-Gbps switching module considerations Intf:6-8
48-port 4-Gbps switching module considerations Intf:6-9
48-port 8-Gbps switching module considerations Intf:6-6
4-port 10-Gbps switching module allocations Intf:6-13
4-port 10-Gbps switching module considerations Intf:6-13, Intf:6-14, Intf:6-15
allocation defaults (table) Intf:6-6, Intf:6-7, Intf:6-8, Intf:6-9
BB_credits
configuring Intf:6-2
description Intf:6-1
reason codes Fund:C-1, Intf:2-9
BB_SC
enabling Intf:6-19
beacon modes
configuring Intf:2-17
identifying LEDs Intf:2-16
bit errors
reasons Intf:2-17
bit error thresholds
configuring Intf:2-17
description Intf:2-17
bitErrRTThresExceeded tooltip Fund:13-14
bootflash:
file system Fund:12-2
recovering from corruption Fund:B-1
space requirements Fund:12-3
border switches
description IVR:1-3
IVR configuration guidelines IVR:2-7
B port mode
description Intf:2-7
interface modes Intf:2-7
B ports
configuring ipsvc:2-24
interoperability mode ipsvc:2-23
SAN extenders ipsvc:2-24
bridge port mode. See B port mode
buffer pools
Generation 2 switching modules Intf:6-3
buffer sizes
configuring in FCIP profiles ipsvc:2-20
buffer-to-buffer credits. See BB_credits
buffer-to-buffer start change. See BB_SC
build fabric frames
description sysmgnt:8-3
bundleMisCfg tooltip Fund:13-14
C
Call Home
AutoNotify feature sysmgnt:4-5
CFS support sysmgnt:2-2
configuration distribution sysmgnt:4-18
configuringsysmgnt:4-5to sysmgnt:4-19
configuring e-mail options sysmgnt:4-15
contact information sysmgnt:4-6
database merge guidelines sysmgnt:4-19
default settings sysmgnt:4-41
description sysmgnt:4-1
duplicate message throttle sysmgnt:4-17
enabling sysmgnt:4-17
features sysmgnt:4-2
inventory notifications sysmgnt:4-16
message format options sysmgnt:4-2
RMON-based alerts sysmgnt:4-14
syslog-based alerts sysmgnt:4-13
testing communications sysmgnt:4-20
Call Home alert groups
configuring sysmgnt:4-10
customizing messages sysmgnt:4-11
description sysmgnt:4-10
Call Home contacts
assigning information sysmgnt:4-6
Call Home destination profiles
attributes sysmgnt:4-8
configuring sysmgnt:4-8
Call Home messages
configuring levels sysmgnt:4-12
format options sysmgnt:4-2
Call Home notifications
full-txt format for syslog sysmgnt:4-25
XML format for RMON sysmgnt:4-29
XML format for syslog sysmgnt:4-26
CAs
authenticating sec:6-10
certificate download example sec:6-18
creating a trust point sec:6-8
default settings sec:6-36
deleting digital certificates sec:6-15
enrollment using cut-and-paste sec:6-4
example configurationsec:6-16to sec:6-35
Fabric Manager Web Services Fund:7-5
identity sec:6-2
maintaining sec:6-14
maximum limits sec:6-35
monitoring sec:6-14
multiple sec:6-4
multiple trust points sec:6-3
peer certificates sec:6-5
purpose sec:6-2
certificate authorities. See CAs
certificate revocation lists. See CRLs
CFS
application requirements sysmgnt:2-5
default settings sysmgnt:2-26
disabling on a switch sysmgnt:2-4
displaying configuration information sysmgnt:2-11
distribution modes sysmgnt:2-4
distribution over IP sysmgnt:2-11
distribution scopes sysmgnt:2-3
enabling on a switch sysmgnt:2-4
example configuration using Device Manager sysmgnt:2-25
example configuration using Fabric Manager sysmgnt:2-23
feature description sysmgnt:2-2
iSLB config distribution ipsvc:2-47
logging configuration distribution sysmgnt:3-13
merge support sysmgnt:2-10
merge support (procedure) sysmgnt:2-25
protocol description sysmgnt:2-3
SAN-OS features supported sysmgnt:2-2
saving configurations sysmgnt:2-9
CFS applications
clearing session locks sysmgnt:2-10
committing changes sysmgnt:2-7
discarding changes sysmgnt:2-9
enabling sysmgnt:2-6
enabling (procedure) sysmgnt:2-6
fabric locking sysmgnt:2-6
CFS over IP
configuring static IP peers sysmgnt:2-12
default settings sysmgnt:2-26
description sysmgnt:2-11
CFS regions
creating sysmgnt:2-19
description sysmgnt:2-17
using CLI sysmgnt:2-19
channelAdminDown tooltip Fund:13-14
channelConfigurationInProgress tooltip Fund:13-14
channelOperSuspended tooltip Fund:13-14
CHAP authentication ipsvc:2-29, ipsvc:2-44, ipsvc:2-58
CHAP challenge ipsvc:2-32
CHAP response ipsvc:2-32
CHAP user name ipsvc:2-31
CIM
configuring Fund:B-3
support Fund:2-17
Cisco Access Control Server. See Cisco ACS
Cisco ACS
configuring for RADIUSsec:4-34to sec:4-37
configuring for TACACS+sec:4-34to sec:4-37
cisco-av-pair
specifying for SNMPv3 sec:4-17
Cisco Discovery Protocol ipsvc:6-11
Cisco MDS 9000 Family
initial setupFund:2-2to Fund:2-12
starting a switch Fund:2-1
Cisco MDS 9216i switches
configuring extended BB_credits Intf:6-17
Cisco MDS SAN-OS
software images Fund:12-1
Cisco Traffic Analyzer
configuring with Performance Manager Fund:11-10
description Fund:9-3
installing (procedure) Fund:9-3
using with Fabric Manager Fund:9-2
Cisco Transport Controller. See CTC
Cisco vendor ID
description sec:4-16
CLI
accessing Fund:D-2
firewall Fund:4-2
clients
disconnecting Fund:7-56
viewing Fund:7-56
clock modules
managing Fund:B-2
cloud discovery. See iSNS cloud discovery
COM1 ports
configuring Fund:B-1
command scheduler
configuring sysmgnt:5-2
default settings sysmgnt:5-3
defining jobs sysmgnt:5-3
description sysmgnt:5-1
See also execution logs; jobs; schedules
command schedulers
configuring Fund:B-2
command scripts
executing Fund:B-2
common roles
configuring sec:3-10
deleting (procedure) sec:3-3
common users
mapping CLI to SNMP sec:3-11
communities
adding Fund:7-57
removing Fund:7-58
CompactFlash
slot0: Fund:12-2
configuration files
displaying Fund:B-2
configuration limits IVR:1-4
configurations
changing initial Fund:2-12
configuring NPV Intf:9-8
congestion window monitoring. See CWM
connectivity
troubleshooting tool Fund:5-41
console logging
configuring sysmgnt:3-5
console ports
parameters Fund:2-2
console sessions
message logging severity levels sysmgnt:3-5
console settings
configuring Fund:B-1
contact information
assigning for Call Home sysmgnt:4-6
Contiguous Domain ID Assignments
About sysmgnt:8-17
contract IDs
description sysmgnt:4-34
core dumps
IPS modules Fund:B-2, ipsvc:6-5
core files
saving to CompactFlash Fund:B-3
CRLs
configuring sec:6-15
configuring revocation checking methods sec:6-11
description sec:6-5
downloading example sec:6-33
generation example sec:6-32
crypto IPv4-ACLs
any keyword sec:7-25
configuration guidelines sec:7-22
creating sec:7-25
mirror images sec:7-24
crypto map entries
global lifetime values sec:7-37
setting SA lifetimes sec:7-31
crypto maps
auto-peer option sec:7-32
configuration guidelines sec:7-29
configuring perfect forward secrecy sec:7-35
entries for IPv4-ACLs sec:7-28
perfect forward secrecy sec:7-34
SA lifetime negotiations sec:7-30
SAs between peers sec:7-28
crypto map sets
applying to interfaces sec:7-36
CTC
description ipsvc:2-17
launching ipsvc:2-17
current VSANs
description IVR:1-3
custom reports
creating a template Fund:7-39
modifying a template Fund:7-47
Custom tab
description Fund:7-39
Cut-through routing mode ipsvc:2-35
cut-thru routing mode ipsvc:2-36
CWM
configuring in FCIP profiles ipsvc:2-19
D
D_S_TOV
errors when setting Fund:13-7
data
management Fund:2-17
database files
resolving lock errors Fund:7-51
Data Encryption Standard encryption. See DES encryption
daylight saving time
adjusting for Fund:B-1
dedicated rate mode
description Intf:5-6
migrating from shared rate mode Intf:5-15, Intf:5-16
migrating to shared rate mode Intf:5-16, Intf:5-17
default gateways. See IPv4 default gateways
default networks
configuring Fund:2-7, Fund:2-10
default networks. See IPv4 default networks
default users
description Fund:2-3
deniedDueToPortBinding tooltip Fund:13-14
DES encryption
IKE sec:7-7
IPsec sec:7-6
desktops
shortcuts not visible Fund:13-4
destination IDs
exchange based Intf:8-5
flow based Intf:8-4
destination profiles
configuring sysmgnt:4-8
device aliases
CFS support sysmgnt:2-2
device IDs
Call Home format sysmgnt:4-35
Device Manager
color definitions Fund:6-7
connection failures Fund:13-10
context menus Fund:6-8
description Fund:2-15, Fund:6-1
disk images not visible Fund:13-7
downgrading Fund:13-4
FAQs Fund:13-1
icons Fund:6-6
installation failures Fund:13-6, Fund:13-7
label definitions Fund:6-7
login failure recovery Fund:13-6
managing ports Fund:6-8
PortChannels Fund:6-8
preferences Fund:6-10
setting preferences Fund:6-10
tabs Fund:6-7
trunking Fund:6-8
upgrade failures Fund:13-4
upgrading Fund:13-4
using interface (figure) Fund:6-4
viewing port status Fund:6-7
viewing supervisor modules Fund:6-8
viewing switch modules Fund:6-8
viewing system messages sysmgnt:3-12
devices
discovery Fund:10-1
management Fund:2-17
modifying groupings (procedure) Fund:5-37
searching in Fabric Manager Fund:13-22
DH
IKE sec:7-7
DHCHAP
AAA authentication sec:8-10
authentication modes sec:8-4
compatibility with other SAN-OS features sec:8-3
configuring AAA authentication sec:8-10
default settings sec:8-10
description sec:8-2
enabling sec:8-4
group settings sec:8-6
hash algorithms sec:8-6
licensing sec:8-2
passwords for local switches sec:8-7
passwords for remote devices sec:8-8
timeout values sec:8-9
differentiated services code point. See DSCP
Diffie-Hellman Challenge Handshake Authentication Protocol. See DHCHAP
Diffie-Hellman protocol. See DH
digital certificates
configuration examplesec:6-17to sec:6-18
default settings sec:6-36
deleting from CAs sec:6-15
generating requests for identity certificates sec:6-12
installing identity certificates sec:6-12
maintaining sec:6-14
maximum limits sec:6-35
monitoring sec:6-14
peers sec:6-5
purpose sec:6-2
requesting identity certificate example sec:6-23
revocation example sec:6-29
SSH support sec:3-20
digital signature algorithm. See DSA key pairs
DirectX
installing Fund:13-6
DNS
configuring Fund:2-7, Fund:2-10
configuring IP addresses Fund:2-7
default settings ipsvc:5-15
DNS servers
configuring ipsvc:5-14
domainAddrAssignFailureIsolation tooltip Fund:13-14
domain ID
CFS support sysmgnt:2-2
domain IDs
allowed lists sysmgnt:8-13
assignment failures Intf:2-10
configuring allowed lists sysmgnt:8-13
contiguous assignments sysmgnt:8-17
description sysmgnt:8-11
distributing sysmgnt:8-2
duplicates causing errors Fund:13-13
enabling contiguous assignments sysmgnt:8-17
failures Fund:C-2
IVR configuration guidelines IVR:2-6
non-unique and IVR NAT IVR:1-11
preferred sysmgnt:8-12
static sysmgnt:8-12
unique IVR:2-6
domainInvalidRCFReceived tooltip Fund:13-14
domain manager
fast restart feature sysmgnt:8-6
isolation Intf:2-10
domainManagerDisabled tooltip Fund:13-14
domainMaxReTxFailure tooltip Fund:13-14
domain names
configuring Fund:2-7
domainOtherSideEportIsolation tooltip Fund:13-14
domainOverlapIsolation tooltip Fund:13-14
domains
overlap isolations Fund:C-2
DPVM
CFS support sysmgnt:2-2
wizard Fund:5-40
drill down reports
description Fund:7-1
drivers
iSCSI ipsvc:2-2
DSA key-pairs
generating sec:3-17
dsa key pairs
generating sec:3-17
DSCP
configuring ipsvc:2-25
dynamic bandwidth management
description Intf:5-9
dynamic initiator mode parameter
distributed with CFS ipsvc:2-47
dynamic iSCSI initiator
converting ipsvc:2-41
convert to staticiSCSI
convert dynamic initiator to static ipsvc:2-20
dynamic mapping ipsvc:2-9, ipsvc:2-41
dynamic mappingiSCSI
dynamic mappingiSCSI
static mappingstatic mapping ipsvc:2-8
E
E_D_TOV
errors when setting Fund:13-7
edge switches
description IVR:1-3
edge VSANs
description IVR:1-3
EFMD
fabric binding sec:10-1
EISLs
PortChannel links Intf:8-2
ELP
verifying using Device Manager (procedure) ipsvc:2-17
elpFailureClassFParamErr tooltip Fund:13-14
elpFailureClassNParamErr tooltip Fund:13-15
elpFailureInvalidFlowCTLParam tooltip Fund:13-15
elpFailureInvalidPayloadSize tooltip Fund:13-15
elpFailureInvalidPortName tooltip Fund:13-15
elpFailureInvalidTxBBCredit tooltip Fund:13-15
elpFailureIsolation tooltip Fund:13-15
elpFailureLoopbackDetected tooltip Fund:13-15
elpFailureRatovEdtovMismatch tooltip Fund:13-15
elpFailureRevMismatch tooltip Fund:13-15
ELP failures
reason codes Fund:C-2
elpFailureUnknownFlowCTLCode tooltip Fund:13-15
e-mail addresses
assigning for Call Home sysmgnt:4-7
e-mail notifications
Call Home sysmgnt:4-1
enclosure names
aliases Fund:5-38, Fund:5-39
end devices
viewing storage port traffic and errors Fund:7-16
entity status inquiry. See ESI
EPLD images
configuring Fund:B-2
E port mode
classes of service Intf:2-4
description Intf:2-4
ePortProhibited tooltip Fund:13-15
E ports
32-port guidelines Intf:2-3
32-port switching module configuration guidelines Intf:8-8
configuring Intf:2-12, ipsvc:2-25
fabric binding checking sec:10-2
FCS support sysmgnt:9-1
SPAN sources sysmgnt:10-3
trunking configuration ipsvc:2-17
eppFailure tooltip Fund:13-15
errorDisabled tooltip Fund:13-15
error messages
gen error messages Fund:13-7
error reports
clearing previous Fund:B-3
escFailureIsolation tooltip Fund:13-15
ESC failures
reason codes Fund:C-2
ESI
non-resp threshold ipsvc:2-73
Ethernet interface
configuring Intf:3-1
default settings Intf:3-3
interface information Intf:3-1
Device Manager Intf:3-2
Fabric Manager Intf:3-1
overview Intf:3-1
Ethernet interfaces
viewing performance information Fund:7-24
Ethernet PortChannels
configuring ipsvc:6-11
description ipsvc:6-10
iSCSI ipsvc:2-56
redundancy ipsvc:2-6
events
displaying using Device Manager Fund:10-5
displaying using Fabric Manager Fund:10-5
displaying using Fabric Manager Web Services Fund:10-5
viewing Fund:7-10
Exchange Fabric Membership Data. See EFMD sec:10-1
exchange link parameter. See ELP
exchange link parameter failures. See ELP failures
expansion port mode. See E port mode
explicit fabric logout ipsvc:2-17
exporting
Performance Manager reports as CSV Fund:11-9
extended BB_credits
configuring Intf:6-18
Generation 2 switching modules Intf:6-16
licensing Intf:6-16
Extended Link Protocol. See ELP
external CompactFlash
formatting Fund:B-2
external RADIUS server
CHAP ipsvc:2-58
external RADIUS servers
CHAP ipsvc:2-58
F
fabric
editing monitoring Fund:7-54
Fabric Analyzer
using display filters Fund:B-3
fabric binding
activation sec:10-3
checking for Ex ports sec:10-2
compatibility with DHCHAP sec:8-3
default settings sec:10-4
descriptionsec:10-1to sec:10-2
EFMD sec:10-1
enforcement sec:10-2
licensing requirements sec:10-1
port security comparison sec:10-1
saving configurations sec:10-4
fabricBindingDBMismatch tooltip Fund:13-15
fabricBindingDomainInvalid tooltip Fund:13-15
fabricBindingNoRspFromPeer tooltip Fund:13-15
fabricBindingSWWNNotFound tooltip Fund:13-15
Fabric Configuration Server. See FCS
Fabric Configuration Servers. See FCSs
fabric lock
releasing ipsvc:2-50
fabric loop port mode. See FL port mode
Fabric Manager IVR:1-6
browser support Fund:2-20
Cisco Traffic Analyzer Fund:9-2
connection failures Fund:13-10
corrupted jar file errors Fund:13-22
description Fund:2-1, Fund:2-14
detachable tables Fund:5-27
downgrading Fund:13-4
downloading software Fund:2-19
error recovery Fund:13-7
FAQs Fund:13-1
FCIP Fund:13-19
installation failures Fund:13-6, Fund:13-7
installing Fund:2-18
integrating with other tools Fund:2-42
ISL statistics Fund:11-3
Java support Fund:2-19
launching troubleshooting Fund:13-3
login failure recovery Fund:13-6
missing Information pane Fund:13-9
mixed software environments Fund:13-22
network discovery Fund:5-35
preinstallation tasks Fund:2-19
problems with map changes Fund:13-8
running behind firewalls Fund:2-42
running with multiple NICs Fund:13-20
searching for devices Fund:13-22
setting preferences Fund:5-33
shows as disabled service Fund:13-6
support operating systems Fund:2-19
uninstalling Fund:2-45
upgrade failures Fund:13-4
upgrading Fund:2-40, Fund:13-4
Fabric Manager authentication
description Fund:4-1
discovery best practices Fund:4-3
Web Server support Fund:4-4
Fabric Manager Clients
advanced mode Fund:5-2
description Fund:2-14, Fund:5-1
displaying physical attributes Fund:5-23
Fabric pane Fund:5-27
filtering Fund:5-23
Information pane Fund:5-26
main menu Fund:5-16
setting preferences Fund:5-33
status bar Fund:5-33
toolbar icons (table) Fund:5-20
troubleshooting tools Fund:5-41
using interface (figure) Fund:5-15
wizards Fund:5-40
Fabric Manager Server
authentication Fund:4-2
configuring preferences Fund:7-57
continuously monitoring fabrics Fund:3-7
database failed to start Fund:13-10
description Fund:2-14, Fund:3-1
disk space requirements Fund:3-1
fabric discovery Fund:4-3
features Fund:3-1
full fabric rediscovery Fund:3-11
installation overview Fund:3-2
installing Fund:3-2
licensing Fund:3-6
local host error messages Fund:13-20
modifying settings Fund:3-10
passwords Fund:3-11
performing administrative tasks Fund:7-50
performing configuration tasks Fund:7-50
polling periods Fund:3-11
Red Hat Linux support Fund:3-1
Solaris support Fund:3-1
user names Fund:3-11
viewing logs Fund:7-68
Windows support Fund:3-1
Fabric Manager Web Server
authentication Fund:4-4
configuring RADIUS authentication Fund:4-4
configuring TACACS+ authentication Fund:4-5
description Fund:2-16
viewing system messages sysmgnt:3-12
Fabric Manager Web Services
configuring communities Fund:7-57
configuring users Fund:7-59
description Fund:7-1
exporting performance data Fund:7-3
initial screen Fund:7-9
installing Fund:7-3
launching Fund:7-7
navigating Fund:7-2
printing Fund:7-3
recovering passwords Fund:7-51
using with SSL Fund:7-5
fabric port mode. See F port mode
fabric reconfiguration
fcdomain phase sysmgnt:8-2
fabrics
discovery Fund:5-35
management Fund:2-17
monitoring Fund:3-7
fabrics. See RCFs; build fabric frames
fabric security
authentication sec:8-1
default settings sec:8-10
FabricWare
events Fund:D-2
Fabric Manager support (table) Fund:D-3
Fibre Channel support Fund:D-1
installing Fabric Manager Web Services Fund:7-3
roles Fund:D-2
security Fund:D-2
SNMP traps Fund:D-2
syslog traps Fund:D-2
zoning support Fund:D-1
FAQs
Device Manager Fund:13-1
Fabric Manager Fund:13-1
fcaliases
using with Fabric Manager Fund:3-12
FCC
logging facility sysmgnt:3-2
fcdomains
autoreconfigured merged fabrics sysmgnt:8-9
default settings sysmgnt:8-23
description sysmgnt:8-2
disabling sysmgnt:8-8
domain IDs sysmgnt:8-11
domain manager fast restart sysmgnt:8-6
dsiplaying statistics sysmgnt:8-23
enabling sysmgnt:8-8
enabling autoreconfiguration sysmgnt:8-10
incoming RCFs sysmgnt:8-9
initiation sysmgnt:8-8
overlap isolation Intf:2-10
restarts sysmgnt:8-3
switch priorities sysmgnt:8-7
FC-GS-3 requests
device grouping support Fund:5-37
FC ID
configuring IVR:2-12
features and benefits IVR:2-12
guidelines IVR:2-12
FC IDs
allocating sysmgnt:8-2
description sysmgnt:8-18
persistentsysmgnt:8-18to sysmgnt:8-23
FCIP ipsvc:2-1
advanced features ipsvc:2-26
checking trunk status (procedure) ipsvc:2-17
compatibility with DHCHAP sec:8-3
compression ipsvc:2-33
configuring using FCIP Wizardipsvc:2-8to ipsvc:2-15
default parameters ipsvc:2-34
discarding packets ipsvc:2-22
enabling ipsvc:2-8
Gigabit Ethernet ports ipsvc:6-4, ipsvc:7-1
IP storage services support ipsvc:6-1, ipsvc:6-2
link failures ipsvc:2-5
restrictions Fund:13-19
time stamps ipsvc:2-22
VE ports ipsvc:2-2
verifying ELP (procedure) ipsvc:2-17
verifying interfaces (procedure) ipsvc:2-17
virtual ISLs ipsvc:2-2
VRRP ipsvc:2-6
write acceleration ipsvc:2-26
FCIP compression
configuring (procedure) ipsvc:2-12
description ipsvc:2-33
FCIP interfaces
configuring advanced featuresipsvc:2-20to ipsvc:2-25
configuring peers ipsvc:2-21
configuring QoS ipsvc:2-25
creating ipsvc:2-21
parameters ipsvc:2-4
SPAN sources sysmgnt:10-3
FCIP links
B port interoperability mode ipsvc:2-23
configuring ipsvc:2-15
configuring peers ipsvc:2-21
configuring QoS ipsvc:2-25
creating ipsvc:2-16
description ipsvc:2-3
endpoints ipsvc:2-3
initiating IP connections ipsvc:2-22
TCP connections ipsvc:2-3
FCIP peers
configuring IP addresses ipsvc:2-21
fcipPortAdminCfgChange tooltip Fund:13-15
fcipPortKeepAliveTimerExpire tooltip Fund:13-15
fcipPortMaxReTx tooltip Fund:13-16
fcipPortPersistTimerExpire tooltip Fund:13-16
fcipPortSrcAdminDown tooltip Fund:13-16
fcipPortSrcLinkDown tooltip Fund:13-16
FCIP profiles
creating ipsvc:2-15
description ipsvc:2-4
fcipSrcModuleNotOnline tooltip Fund:13-16
fcipSrcPortRemoved tooltip Fund:13-16
FCIP tape acceleration
configuring ipsvc:2-33
descriptionipsvc:2-28to ipsvc:2-33
FCIP TCP parameters
configuring buffer size ipsvc:2-20
configuring CWM ipsvc:2-19
configuring keepalive timeouts ipsvc:2-18
configuring maximum jitter ipsvc:2-20
configuring maximum retransmissions ipsvc:2-18
configuring minimum retransmit timeouts ipsvc:2-18
configuring PMTUs ipsvc:2-19
configuring SACKs ipsvc:2-19
configuring window management ipsvc:2-19
FCIP write acceleration
configuring ipsvc:2-28
configuring (procedure) ipsvc:2-12
description ipsvc:2-26
FC Logical Interface Tables ipsvc:2-22
FCoE
wizard Fund:5-40
FCoE Configuration Wizard Intf:4-9
fcotChksumErr tooltip Fund:13-16
fcotNotPresent tooltip Fund:13-16
fcotVendorNotSupported tooltip Fund:13-16
FCP
routing requests ipsvc:2-4
FCS
description sysmgnt:9-1
logging facility sysmgnt:3-2
significance sysmgnt:9-2
FC-SP
authentication sec:8-1
enabling sec:8-4
enabling on ISLs sec:8-10
fcspAuthenfailure tooltip Fund:13-16
FCSs
default settings sysmgnt:9-6
description sysmgnt:9-1
displaying informationsysmgnt:9-3to sysmgnt:9-4
fctimers
CFS support sysmgnt:2-2
configuring CFS Fund:B-3
Federal Information Processing Standards. See FIPS
Fibre Channel ipsvc:2-1
iSCSI targetsipsvc:2-8to ipsvc:2-14
Fibre Channel Analyzers
configuring using SPAN sysmgnt:10-12
Fibre Channel analyzers
capturing frames locally Fund:B-3
clearing configured information Fund:B-3
monitoring without SPAN sysmgnt:10-11
sending frames to remote IP addresses Fund:B-3
Fibre Channel domains. See fcdomains
Fibre Channel header modifications IVR:1-4
Fibre Channel interface
default settings Intf:2-29
Fibre Channel interfaces
administrative states Intf:2-8
BB_credits Intf:6-1
characteristicsIntf:2-2to Intf:2-11
configuring Intf:2-10
configuring beacon modes Intf:2-17
configuring bit error thresholds Intf:2-17
configuring descriptions Intf:2-13
configuring frame encapsulation Intf:2-16
configuring port modes Intf:2-12
configuring receive data field sizes Intf:6-19
configuring speeds Intf:2-12
deleting from PortChannels Intf:8-20
disabling Intf:2-11
enabling Intf:2-11
graceful shutdown Intf:2-11
modesIntf:2-3to Intf:2-7
operational states Intf:2-8
performance buffers Intf:6-2
reason codes Intf:2-8
states Intf:2-8
taking out of service on Generation 2 switching modules Intf:5-26
troubleshooting operational states Intf:2-9
See also interfaces Intf:2-8
Fibre Channel over IP. See FCIP
Fibre Channel Security Protocol. See FC-SP
Fibre Channel targets
dynamic importing ipsvc:2-10
dynamic mapping ipsvc:2-10
Fibre Channel traffic
SPAN sources sysmgnt:10-3
Fibre Channel zoning-based access control ipsvc:2-28
FICON
fabric binding requirements sec:10-3
Fabric Manager Client support Fund:5-2
ficonBeingEnabled tooltip Fund:13-16
ficonNoPortnumber tooltip Fund:13-16
ficonNotEnabled tooltip Fund:13-16
ficonVsanDown tooltip Fund:13-16
FICP
wizard Fund:5-40
files
compressing Fund:B-2
displaying contents Fund:B-1
displaying last lines Fund:B-2
uncompressing Fund:B-2
File Transfer Protocol. See FTP
filtering
end port groups Fund:5-32
switch groups Fund:5-32
configuration guidelines sec:2-1
self-tests sec:2-3
firewalls
configuring Fund:2-14
running with Fabric Manager Fund:2-42
firstPortNotUp tooltip Fund:13-16
firstPortUpAsEport tooltip Fund:13-16
FLOGI
logging facility sysmgnt:3-2
flows
performance statistics Fund:8-1
viewing performance information Fund:7-23
FL port mode
classes of service Intf:2-5
description Intf:2-5
FL ports
configuring Intf:2-12
description Intf:2-5
nonparticipating code Intf:2-10
nonparticipating codes Fund:C-2
persistent FC IDs sysmgnt:8-19
SPAN sources sysmgnt:10-3
F port mode
classes of service Intf:2-5
description Intf:2-5
F ports
configuring Intf:2-12
description Intf:2-5
SPAN sources sysmgnt:10-3
FPSF
load balancing (example) ipsvc:2-5
frame encapsulation
configuring Intf:2-16
frames
configuring MTU size ipsvc:6-6, ipsvc:7-4
frequently asked questions. See FAQs
FSPF
path selection protocol Fund:D-1
support Fund:2-17
FTP
logging facility sysmgnt:3-2
support Fund:2-16
full core dumps
IPS modules ipsvc:6-6
Fx ports
32-port default Intf:2-3
configuring Intf:2-12
description Intf:2-7
FCS sysmgnt:9-1
FCS support sysmgnt:9-1
interface modes Intf:2-7
See also F ports; FL ports Intf:2-7
G
Generation 1 switching modules
extended BB_credits Intf:6-16
port index allocations Intf:5-11
Generation 2 switching modules
buffer groupsIntf:6-3to Intf:6-14
configuringIntf:5-14to Intf:6-19
configuring port speeds Intf:5-18
configuring rate modes Intf:5-19
default settings Intf:5-30
descriptionIntf:5-1to Intf:5-3
dynamic bandwidth management Intf:5-9
extended BB_credits Intf:6-16, Intf:6-17
installing in Generation 1 chassis Fund:12-18
out-of-service interfaces Intf:5-10
port groups Intf:5-3
port index allocations Intf:5-11
port rate modes Intf:5-4
recovering from powered-down state Intf:5-12
releasing shared resources Intf:5-27
taking interfaces out of service Intf:5-26
Generation 3 switching modules
default settings Intf:5-30
Gigabit Ethernet
IPv4 example configuration ipsvc:6-5
Gigabit Ethernet interface example ipsvc:2-54
Gigabit Ethernet interfaces
configuringipsvc:6-4to ipsvc:6-11
configuring auto-negotiation ipsvc:6-6, ipsvc:7-3
configuring IPv4 ipsvc:7-2
configuring IPv6 addresses ipsvc:8-12
configuring MTU frame sizes ipsvc:6-6, ipsvc:7-4
configuring promiscuous mode ipsvc:6-7, ipsvc:7-4
configuring VRRP ipsvc:6-10
default parameters ipsvc:7-7
IPv4-ACL guidelines ipsvc:7-6
subinterfaces ipsvc:6-7, ipsvc:7-5
subnet requirements ipsvc:6-7, ipsvc:7-5
viewing performance information Fund:7-24
Gigabit Ethernet subinterfaces
configuring VLANs ipsvc:7-5
global authentication
paramter distributed ipsvc:2-47
global keys
assigning for RADIUS sec:4-10
H
hardware
viewing list Fund:7-10
hardware failures
configuring actions Fund:B-3
HA solution example ipsvc:2-53
HBA port ipsvc:2-16, ipsvc:2-21
HBA ports
configuring area FCIDs sysmgnt:8-20
Health tab
description Fund:7-9
hexadecimal fields ipsvc:8-11
high availability
compatibility with DHCHAP sec:8-3
Ethernet PortChannel ipsvc:2-56
Ethernet PortChannels ipsvc:2-6
Fibre Channel PortChannels ipsvc:2-7
software upgrades Fund:12-5
VRRP ipsvc:2-6, ipsvc:2-55
VRRPVRRP-based high availability ipsvc:2-55
historical data
preserving Fund:13-19
host names
configuring for digital certificates sec:6-6
hosts
performance statistics Fund:8-1
HTTP
port used Fund:2-43
support Fund:2-16
HTTP proxy servers
configuring Fund:13-21
HTTPS
support Fund:2-16
hwFailure tooltip Fund:13-16
I
ICMP
IPv6 ipsvc:8-6
ICMP packets
IPv6 header format, figure ipsvc:8-7
type value sec:5-4
icons
Device Manager Fund:6-6
IDs
Cisco vendor ID sec:4-16
contract IDs sysmgnt:4-34
login IDs Fund:2-6
serial IDs sysmgnt:4-35, sysmgnt:4-36, sysmgnt:4-38, sysmgnt:4-40
server IDs sysmgnt:4-36
site IDs sysmgnt:4-34
IKE
algorithms for authentication sec:7-7
default settings sec:6-36, sec:7-39
description sec:7-3
initializing sec:7-13
refreshing SAs sec:7-20
terminology sec:7-5
transforms for encryption sec:7-7
viewing configuration (procedure) sec:7-11
IKE domains
clearing sec:7-20
description sec:7-13
IKE initiators
configuring version sec:7-18
IKE peers
configuring keepalive times sec:7-17
IKE policies
configuring negotiation parameters sec:7-15
negotiation sec:7-14
IKE tunnels
clearing sec:7-20
description sec:7-13
images
See kickstart images; software images; system images
Software Installation Wizard Fund:12-8
images. See kickstart images; software images; system images
in-band access
configuring Fund:2-9
IPFC Fund:2-13
in-band management
configuring Fund:2-9, Fund:2-10
Ethernet connection Fund:2-18
IPFC ipsvc:5-7
IPFC connection Fund:2-18
logical interface Fund:2-9
incomAdminRxBBCreditPerBuf tooltip Fund:13-16
incompatibleAdminMode tooltip Fund:13-16
incompatibleAdminRxBBCredit tooltip Fund:13-16
incompatibleAdminRxBufferSize tooltip Fund:13-16
incompatibleadminSpeed tooltip Fund:13-16
initialization string
configuring Fund:B-1
initializing tooltip Fund:13-16
initiators
statically mapped iSCSI ipsvc:2-37
install all command
failure cases Fund:12-7
interfaceRemoved tooltip Fund:13-16
interfaces
adding to PortChannels Intf:8-17, Intf:8-18
configuring data field size Intf:6-19
configuring descriptions Intf:2-13
default settings Intf:2-29
deleting from PortChannels Intf:8-20
forced addition to PortChannels Intf:8-19
isolated states Intf:8-18
nonoperational reason codes Fund:C-1
reason codes Fund:C-1
SFP types Intf:2-19
suspended states Intf:8-18
interface statistics
gathering Intf:2-19
Internet Control Message Protocol. See ICMP
Internet Explorer
Fabric Manager support Fund:2-20
Internet Key Exchange. See IKE
Internet Storage Name Service. See iSNS
Inter-VSAN Routing zones. See IVR zones
Inter-VSAN Routing zone sets. See IVR zone sets
invalidAttachment tooltip Fund:13-16
invalidConfig tooltip Fund:13-16
invalidFabricBindExh tooltip Fund:13-16
inventories
configuring notifications sysmgnt:4-16
managing Fund:10-3
viewing details for switches Fund:7-32
viewing details for VSANs Fund:7-31
viewing information Fund:7-30
viewing ISL information Fund:7-36
viewing module details Fund:7-34
viewing zone information Fund:7-38
Inventory tab
description Fund:7-29
IP-ACLs
wizard Fund:5-40
IP addresses
management interfaces Fund:2-3
IP connections
active mode ipsvc:2-22
initiating ipsvc:2-22
passive mode ipsvc:2-22
IP domain names
configuring for digital certificates sec:6-6
IPFC
configuration guidelines ipsvc:5-7
description ipsvc:5-7
errors caused by configuration Fund:13-8
in-band access Fund:2-13
in-band management Fund:2-18
logging facility sysmgnt:3-2
IP filters
contents sec:5-3
restricting IP traffic sec:5-1, sec:5-2
using IP-ACL Wizard (procedure) sec:5-5
IP routing
IPS core dumps. See core dumps
IPsec
algorithms for authentication sec:7-6
configuring with FCIP Wizard (procedure) ipsvc:2-9
crypto IPv4-ACLssec:7-21to sec:7-25
default settings sec:7-39
description sec:7-2
digital certificate supportsec:7-7to sec:7-10
enabling with FCIP Wizard (procedure) sec:7-10
fabric setup requirements sec:7-5
global lifetime values sec:7-37
hardware compatibility sec:7-4
licensing requirements sec:7-4
maintenance sec:7-37
prerequisites sec:7-4
RFC implementations sec:7-1, sec:7-2
terminology sec:7-5
transform sets sec:7-25
transforms for encryption sec:7-6
unsupported features sec:7-5
viewing configuration (procedure) sec:7-11
IPS modules
configuring CDP ipsvc:6-11
core dumps Fund:B-2, ipsvc:6-5
partial core dumps ipsvc:6-5
port modes ipsvc:6-4, ipsvc:7-1
software upgrades ipsvc:6-3
supported features ipsvc:6-1, ipsvc:6-2
IPS port mode
description ipsvc:6-4
IPS ports ipsvc:2-9
modes ipsvc:7-1
multiple connections ipsvc:2-54
SPAN sources sysmgnt:10-3
IP storage services
default parameters ipsvc:6-11
IP Storage services modules. See IPS modules
IPv4
configuring Gigabit Ethernet interfaces ipsvc:7-2
default settings ipsvc:7-7
description ipsvc:7-1
transitioning to IPv6 ipsvc:8-15
IPv4-ACLs
adding entries sec:5-7
applying to interfaces sec:5-10, sec:5-11
configuration guidelines sec:5-2
creating complex IPv4-ACLs (procedure) sec:5-6
creating with IP-ACL Wizard (procedure) sec:5-5
cryptosec:7-21to sec:7-25
crypto map entries sec:7-28
example configuration sec:5-12
FabricWare support Fund:D-2
guidelines for Gigabit Ethernet interfaces ipsvc:7-6
reading dump logs sec:5-9
removing entries sec:5-8
IPv4 addresses
configuring IPv6 and IPV6 protocol stacks ipsvc:8-13
IPv6 protocol stacks ipsvc:8-10
IPv4 default gateways
configuring Fund:2-10, ipsvc:5-3
configuring mgmt0 interfaces Intf:2-27
description ipsvc:5-3
static routes (tip) ipsvc:5-6
IPv4 default networks
description ipsvc:5-6
IPv6
address types ipsvc:8-3
configuring addressing ipsvc:8-11
configuring IPv4 and IPv6 addresses ipsvc:8-13
configuring management interfaces ipsvc:5-3
default settings ipsvc:8-15
descriptionipsvc:8-1to ipsvc:8-11
dual IPv4 and IPv6 protocol stack applications, figure ipsvc:8-11
dual IPv4 and IPv6 protocol stacks ipsvc:8-10
dual IPv4 and IPv6 protocol stack technique, figure ipsvc:8-10
enabling routing ipsvc:8-11
enhancements over IPv4 ipsvc:8-1
ICMP ipsvc:8-6
IPv6-ACL guidelines ipsvc:8-14
neighbor discovery ipsvc:8-7
path MTU discovery ipsvc:8-7
router advertisement messages ipsvc:8-9
router discovery ipsvc:8-9
stateless autoconfiguration ipsvc:8-9
static routes ipsvc:8-13
transitioning from IPv4 ipsvc:8-15
IPv6-ACLs
guidelines for IPv6 ipsvc:8-14
IPv6 addresses
configuring ipsvc:8-11
configuring IPv4 and IPV6 protocol stacks ipsvc:8-13
formats ipsvc:8-2
link-local type ipsvc:8-4
multicast type ipsvc:8-5
prefix format ipsvc:8-3
unicast type ipsvc:8-3
IPv6 enhancements over IPv4 ipsvc:8-1
IPv6 neighbor discovery
advertisement messages ipsvc:8-7
description ipsvc:8-7
neighbor solicitation message, figure ipsvc:8-8
solicitation messages ipsvc:8-7
IPv6 routing
enabling ipsvc:8-11
IPv6 static routes
configuring ipsvc:8-13
IQN
formats ipsvc:2-9
IQNs
formats ipsvc:2-9
ISCSI
enforcing access control ipsvc:2-28
iSCSI
access controlipsvc:2-25to ipsvc:2-29
add initiator to zone database ipsvc:2-26
advanced VSAN membershipadvanced VSAN membership ipsvc:2-25
checking for WWN conflicts ipsvc:2-20
compatible drivers ipsvc:2-2
configuring AAA authentication ipsvc:2-29, ipsvc:2-30
configuring ACLs ipsvc:2-27
configuring VRRP ipsvc:2-55
creating virtual targets ipsvc:2-11
default parameters ipsvc:2-76
discovery phase ipsvc:2-28
drivers ipsvc:2-2
enabling ipsvc:2-2, ipsvc:2-5
error ipsvc:2-16
Fabric Manager Client support Fund:5-2
Fibre Channel targetsipsvc:2-8to ipsvc:2-14
Gigabit Ethernet ports ipsvc:6-4, ipsvc:7-1
GW flagiSCSI
gateway device ipsvc:2-17
HA with host without multi-path software ipsvc:2-52
initiator idle timeoutinitiator idle timeout
iSCSIinitiator idle timeout
initiator name ipsvc:2-31
initiator targets ipsvc:2-7
IPS module support ipsvc:6-1, ipsvc:6-2
IQNs ipsvc:2-15
login redirect ipsvc:2-38
MPS-14/2 module support ipsvc:6-1, ipsvc:6-2
multiple IPS ports ipsvc:2-54
PortChannel-based high availability ipsvc:2-56
PortChannel-based high availabilityEthernet PortChannel-based high availability ipsvc:2-56
protocol ipsvc:2-1, ipsvc:2-2
requests and responses ipsvc:2-4
restrict an initiator to a specific user name for CHAP authentication ipsvc:2-31
routing ipsvc:2-1, ipsvc:2-2
routing modes chartrouting modes chart for iSCSI ipsvc:2-35
session creation ipsvc:2-28
session limits ipsvc:2-16
statically mapped initiators ipsvc:2-37
tables in Fabric Manager ipsvc:2-20
targets in Device Manager ipsvc:2-10
transparent initiator mode ipsvc:2-16
users with local authentication ipsvc:2-31
using iSCSI Wizard (procedure)ipsvc:2-6to ipsvc:2-8
VSAN membership ipsvc:2-23
VSAN membership example ipsvc:2-24
VSAN membership for iSCSI interfaces ipsvc:2-23, ipsvc:2-24
wizard Fund:5-40
zone name ipsvc:2-8
iSCSI authentication
configuring ipsvc:2-29, ipsvc:2-44
configuring RADIUS (procedure) ipsvc:2-32
external RADIUS servers ipsvc:2-58
global override ipsvc:2-30
local authentication ipsvc:2-31
mechanisms ipsvc:2-30
restricting on initiators ipsvc:2-31
scenarios ipsvc:2-57
setup guidelines ipsvc:2-57
iSCSI-based access control ipsvc:2-25, ipsvc:2-27
iSCSI devices
example membership in VSANs ipsvc:2-24
iscsi-gw ipsvc:2-21
iSCSI high availability
configuringipsvc:2-51to ipsvc:2-57
iSCSI hosts
initiator identification ipsvc:2-15
iSCSI initiators
configuring static IP address mapping ipsvc:2-19
dynamic mapping ipsvc:2-18
making dynamic WWN mapping static ipsvc:2-20
proxy mode ipsvc:2-21
statically mapped (procedure) ipsvc:2-19
static mapping ipsvc:2-18
transparent mode ipsvc:2-16
WWN assignments ipsvc:2-18
iSCSI interfaces
configuring listener ports ipsvc:2-33
configuring listener portsiSCSI
listener port ipsvc:2-33
configuring QoS ipsvc:2-34
configuring routing modesiSCS
configuring routing modesrouting modes ipsvc:2-34
configuring TCP tuning parameters ipsvc:2-33
creating ipsvc:2-6
creatingiSCSI
creating interfaces ipsvc:2-6
SPAN sources sysmgnt:10-3
iSCSI LUs ipsvc:2-9
iSCSI protocol ipsvc:2-1
iSCSI server load balancing ipsvc:2-36
iSCSI Server Load Balancing. See iSLB
iSCSI sessions
authenticationiSCSI
session authenticationauthentication
iSCSI targets
advertising ipsvc:2-13
dynamic importing ipsvc:2-9
dynamic mapping ipsvc:2-9
examples ipsvc:2-13
secondary access ipsvc:2-53
static importing ipsvc:2-11
static importingstatic mappingiSCSI targets
static mapping ipsvc:2-11
transparent failover ipsvc:2-51
iSLB
activating zones ipsvc:2-42
auto-zoning ipsvc:2-48
CFS support sysmgnt:2-2
committing configuration changescommitting configuration changes
iSLB ipsvc:2-49
configuration limits ipsvc:2-37
configuration prerequisites ipsvc:2-38
configuring ipsvc:2-36
configuring initiators and targets ipsvc:2-42
configuring VRRP ipsvc:2-46
configuring with Device Manager ipsvc:2-38
configuring zones ipsvc:2-42
default settings ipsvc:2-77
distributing configuration using CF ipsvc:2-47
dynamic initiator mapping ipsvc:2-41
enabling configuration distribution ipsvc:2-48
initiator WWN assignment ipsvc:2-36
maximum initiators ipsvc:2-37
static initiator configurationinitiator configuration
static iSLB ipsvc:2-37
VSAN membership ipsvc:2-41
zone set activation failed ipsvc:2-43
iSlb
default settings ipsvc:2-77
iSLB auto-zone feature ipsvc:2-38
iSLB initiators ipsvc:2-38
assigning WWNs ipsvc:2-41
configuringipsvc:2-40to ipsvc:2-45
dynamic initiator mapping ipsvc:2-41
VSAN membership ipsvc:2-41
iSLB initiator targets
description ipsvc:2-42
iSLB sessions
maximum per IPS portiSLB
maximum sessions per IPS port ipsvc:2-37
iSLB with CFS distribution ipsvc:2-37
ISLs
graph past 24 hours performance Fund:7-27
performance statistics Fund:8-1
PortChannel links Intf:8-2
statistics Fund:11-3
viewing detailed inventory information Fund:7-36
viewing performance information Fund:7-17
iSMS servers
enabling ipsvc:2-72
iSNS
CFS support sysmgnt:2-2
client registration ipsvc:2-73
cloud discovery ipsvc:2-74
configuring ipsvc:2-74
configuring serversipsvc:2-72to ipsvc:2-74
description ipsvc:2-68
ESI ipsvc:2-73
iSNS client
description ipsvc:2-68
iSNS clients
creating profiles ipsvc:2-69
iSNS cloud discovery
CFS distribution ipsvc:2-76
description ipsvc:2-74
iSNS profiles
creating ipsvc:2-69
iSNS servers
configuration distribution ipsvc:2-72
description ipsvc:2-70
enabling ipsvc:2-72
example scenario ipsvc:2-71
IVR
activating topologies IVR:2-10
AF IDs IVR:2-8
basic configuration IVR:1-1
basic configuration task list IVR:1-5
border switch IVR:1-3
border switch, guidelines IVR:2-7
border switch configuration guidelines IVR:2-7
border switches IVR:1-3
configuration IVR:2-9
configuration limits IVR:1-4
configuration task lists IVR:1-5, IVR:2-1
configuring
advanced IVR:2-2
basic IVR:1-6
configuring logging levels IVR:1-22
configuring without auto topology IVR:2-6
configuring without IVR NAT IVR:2-6
guidelines IVR:2-6
current VSANs IVR:1-3
database merge guidelines IVR:1-23
databases IVR:1-9
default settings IVR:1-26
default zone policy IVR:1-14
domain ID configuration guidelines IVR:2-6
domain ID guidelines IVR:2-6
edge switch IVR:1-3
edge switches IVR:1-3
edge VSANs IVR:1-3
enabling IVR:1-8
enabling distribution with CFS IVR:1-8
Fabric Manager Client support Fund:5-2
features IVR:1-2
Fibre Channel header modifications IVR:1-4
FICON support Fund:B-2
interoperability IVR:1-5
logging IVR:1-22
native VSANs IVR:1-3
paths IVR:1-3
persistent FC IDs IVR:2-11
read-only zoning IVR:2-15
terminology IVR:1-3
transit VSAN configuration guidelines IVR:2-7
transit VSANs IVR:1-3
virtual domains IVR:1-13
VSAN topologies IVR:1-5
wizard Fund:5-40
zone communication IVR:1-14
zone configuration guidelines IVR:2-14
zone sets IVR:1-3
Zone Wizard IVR:1-6
IVR databases
active IVR:1-9
configured IVR:1-9
merge guidelines IVR:1-23
pending IVR:1-9
IVR logging
configuring levels IVR:1-22
IVR manual configuration
guidelines IVR:2-8
IVR NAT
border switch, guidelines IVR:1-12
configuration guidelines IVR:1-10
description IVR:1-11
enabling auto-discovery IVR:1-12
load balancing IVR:1-10
modifying IVR:1-12
requirements IVR:1-10
transit VSANs, guidelines IVR:1-11
IVR persistent FC IDs
configuring IVR:2-12
persistent IVR:2-11
IVR service groups
activation IVR:2-3
characteristics IVR:2-2
configuring IVR:2-3
default IVR:2-3
description IVR:1-3
IVR configuration guidelines IVR:2-2
IVR topologies
activating a manually configured topology IVR:2-10
CFS support sysmgnt:2-2
clearing manual entries IVR:2-10
configuring manually IVR:2-9
enabling automatic discovery IVR:1-12
migrating from IVR auto topology mode to IVR manual topology mode IVR:2-11
recovering IVR:1-22
IVR virtual domains
clearing IVR:1-13
description IVR:1-13
IVR without NAT
configuring IVR:2-7
IVR zones
activating with force option IVR:1-19
advanced
description IVR:2-13
automatic creation IVR:1-15
configuringIVR:1-16to IVR:1-19
configuring LUNs IVR:2-14
configuring QoS attributes IVR:2-14
configuring with IVR Zone Wizard IVR:1-6
differences with zones (table) IVR:1-14
maximum number of members IVR:1-4
maximum number of zones IVR:1-4
recovering the full database IVR:1-21
renaming IVR:2-15
IVR zone sets
activating IVR:1-20
advanced configuration
description IVR:2-13
configuringIVR:1-16to IVR:1-21
deactivating IVR:1-20
maximum number IVR:1-4
renaming IVR:2-15
IVR Zone Wizard IVR:1-6
J
Java
execution failures Fund:13-6
java.lang.ArrayIndexOutOfBoundsException errorArrayIndexOutOfBoundsException error Fund:13-7
Java RMI
ports used Fund:2-43
Java Runtime Environment. See JRE
Java Web Start
checking installation Fund:13-3
clearing the cache Fund:13-6
Fabric Manager support Fund:2-19
hangs on the download dialog Fund:13-5
not detected Fund:13-4
running from command line Fund:13-5
setting up on *.jnlp files Fund:13-5
jitter
configuring estimated maximum in FCIP profiles ipsvc:2-20
JNLP
verifying settings Fund:13-3
jobs
command scheduler sysmgnt:5-1
defining sysmgnt:5-3
JRE
Fabric Manager requirements Fund:7-4
K
keepalive timeouts
configuring in FCIP profiles ipsvc:2-18
kernel core dumps
configuring Fund:B-3
kickstart images
description Fund:12-2
KICKSTART variable Fund:12-1
selecting for supervisor modules Fund:12-3
Konqueror
configuring for Java Web Start Fund:13-5
L
latency
forwarding ipsvc:2-34
LEDs
beacon mode states Intf:2-16
speed Intf:2-17
licenses
backing up files Fund:B-1
extended BB_credits Intf:6-16
Fabric Manager Fund:13-24
moving between switches Fund:B-1
One-Click License Install failed Fund:13-9
unsupported features Fund:B-1
viewing switch information Fund:7-33
wizard Fund:5-40
linkFailCreditLossB2B tooltip Fund:13-17
linkFailCreditLoss tooltip Fund:13-17
linkFailDebounceTimeout tooltip Fund:13-17
linkFailLineCardPortShutdown tooltip Fund:13-17
linkFailLinkReset tooltip Fund:13-17
linkFailLIPF8Rcvd tooltip Fund:13-17
linkFailLIPRcvdB2B tooltip Fund:13-17
linkFailLossOfSignal tooltip Fund:13-17
linkFailLossOfSync tooltip Fund:13-17
linkFailLRRcvdB2B tooltip Fund:13-17
linkFailNOSRcvd tooltip Fund:13-17
linkFailOLSRcvd tooltip Fund:13-17
linkFailOPNyRETB2B tooltip Fund:13-17
linkFailOPNyTMOB2B tooltip Fund:13-17
linkFailPortInitFail tooltip Fund:13-17
linkFailPortUnusable tooltip Fund:13-17
linkFailRxQOverFlow tooltip Fund:13-17
linkFailTooManyINTR tooltip Fund:13-17
link failures
reason codes Fund:C-1
linkFailure tooltip Fund:13-17
link-local addresses
description ipsvc:8-4
format, figure ipsvc:8-5
link redundancy
Ethernet PortChannel aggregation ipsvc:6-10
Linux Fund:2-36
Fabric Manager support Fund:2-19
installing Fabric Manager Web Services Fund:7-4
install scripts Fund:2-36
load balancing ipsvc:2-36, ipsvc:2-38
description Intf:8-4
FSPF (example) ipsvc:2-5
PortChannels Intf:8-2
PortChannels (example) ipsvc:2-5
weighted ipsvc:2-42
load metric ipsvc:2-42
lock the fabric ipsvc:2-49
logging
default settings sysmgnt:3-14
disabling sysmgnt:3-4
enabling sysmgnt:3-4
message severity levels sysmgnt:3-3
logins
failure recovery Fund:13-6
SSH sec:4-5
Telnet sec:4-5
logs
increasing log window size Fund:13-10
RMON sysmgnt:7-14
SNMP events sysmgnt:6-14
viewing information Fund:7-68
viewing using Device Manager Fund:10-4
viewing using Fabric Manager Web Server Fund:10-4
loopbackDiagFailure tooltip Fund:13-17
loopbackIsolation tooltip Fund:13-17
loopback tests
configuring frequency Fund:B-3
loops
monitoring Fund:B-3
LUN ipsvc:2-9
trespass for storage port failover ipsvc:2-54
LUN mapping ipsvc:2-53
LUNs
explicit access control ipsvc:2-21
mapping and assignment ipsvc:2-21
LUs ipsvc:2-9
M
management
role-based Fund:5-40
management access
configuring in-bandFund:2-9to Fund:2-12
configuring out-of-bandFund:2-5to Fund:2-9
description Fund:2-13
in-band Fund:2-4
out-of-band Fund:2-4
management interfaces
configuring Intf:2-27, ipsvc:5-3
configuring for IPv6 ipsvc:5-3
default settings Intf:2-29
features Intf:2-27
IP addresses Fund:2-3
management protocols
supported (table) Fund:2-16
map preferences
Automatically Save Layout default Fund:5-35
Detach Overview Window default Fund:5-35
Display End Device Labels default Fund:5-34
Display End Devices default Fund:5-34
Display Unselected VSAN Members default Fund:5-34
Expand Loops default Fund:5-34
Expand Multiple Links default Fund:5-34
Layout New Devices Automatically default Fund:5-35
Open New Device Manager Each Time default Fund:5-34
Override Preferences for Non-default Layout default Fund:5-35
Select Switch or Link from Table default Fund:5-35
Use Quick Layout when Switch has >=30 End Devices default Fund:5-35
maps
black squares Fund:13-14
brown squares Fund:13-14
clearing license orange X Fund:13-24
clearing topologies Fund:13-21
color definitions Fund:13-13
default preferences Fund:5-34
freezing the layout look Fund:13-13
green squares with mode Fund:13-14
grouping end devices Fund:5-37
highlighting Fund:5-29
icon descriptions Fund:5-27
light gray squares Fund:13-14
module warnings Fund:13-13
no squares Fund:13-14
orange crosses Fund:13-14
orange squares with mode Fund:13-14
purging down elements Fund:5-30
red crosses Fund:13-14
red line through switches Fund:13-13
red squares Fund:13-14
refreshing Fund:5-30
saving Fund:5-30
shows two switches when only one Fund:13-13
tab descriptions Fund:5-29
upgrade software without losing map settings Fund:13-19
viewing large Fund:5-29
Visio diagrams Fund:5-30
maps module failuresmaps
fan failuresmaps
power supply failures Fund:13-13
maximum retransmissions
configuring in FCIP profiles ipsvc:2-18
McAfee Internet Suite 6.0 Professional
Device Manager installation failures Fund:13-7
Fabric Manager installation failures Fund:13-7
MD5 authentication
IKE sec:7-7
IPsec sec:7-6
VRRP ipsvc:5-14
merged fabrics
autoreconfigured sysmgnt:8-9
merge status conflictsiSLB
merge status conflictsCFS
merge status conflicts ipsvc:2-51
Message Authentication Code using AES. See AES-XCBC-MAC
Message Digest 5. See MD5 authentication
messages
selecting severity level Fund:7-56
mgmt0
out-of-band management Fund:2-18
mgmt0 interfaces
configuring Intf:2-27
configuring out-of-band access Fund:2-6
default settings Intf:2-29
features Intf:2-27
local IPv4 routing ipsvc:5-7
out-of-band access Fund:2-13
Microsoft Challenge Handshake Authentication Protocol. See MSCHAP
minimum retransmit timeouts
configuring in FCIP profiles ipsvc:2-18
modems
configuring settings Fund:B-1
module configurations
preserving Fund:B-2
purging Fund:B-2
modules
configuring message logging sysmgnt:3-6
connecting to Fund:B-2
replacing Fund:12-18
module tests
configuring Fund:B-3
monitoring traffic
RSPAN sysmgnt:10-16
SPAN sysmgnt:10-6
monitor sessions
message logging severity levels sysmgnt:3-5
Mozilla
configuring for Java Web Start Fund:13-5
MPS-14/2 modules ipsvc:2-1, ipsvc:2-2, ipsvc:2-3, ipsvc:2-6, ipsvc:2-21, ipsvc:2-28
configuring extended BB_credits Intf:6-17
port modes ipsvc:6-4, ipsvc:7-1
software upgrades ipsvc:6-4
supported features ipsvc:6-1, ipsvc:6-2
MSCHAP
description sec:4-31
MTU frame sizes
configuring Gigabit Ethernet interfaces ipsvc:6-6
MTUs
configuring frame sizes ipsvc:7-4
path discovery for IPv6 ipsvc:8-7
multicast addresses
IPv6 alternative to broadcast addresses ipsvc:8-6
IPv6 format, figure ipsvc:8-5
IPv6 solicited-node format, figure ipsvc:8-6
multi-path software example ipsvc:2-52
multiple fabrics Fund:10-3
managing Fund:13-24
multiple VSANs
configuring ipsvc:5-9
Multiprotocol Services modules. See MPS-14/2 modules
mutual CHAP authentication
configuring for iSCSI ipsvc:2-31
configuring for iSLB ipsvc:2-44
configuring for iSLBI ipsvc:2-44
N
native VSANs
description IVR:1-3
network administrator roles
FabricWare Fund:D-2
network administrators
additional roles sec:4-3
permissions sec:4-3
network monitoring
device discovery Fund:10-1
mapping topologies Fund:10-2
network operator roles
FabricWare Fund:D-2
network operators
permissions sec:4-3
NICs
manually specifying for Device Manager Fund:13-21
manually specifying for Fabric Manager Client Fund:13-21
manually specifying for Fabric Manager Server Fund:13-20
NL ports
interface modes Intf:2-7
nondisruptive upgrades
methods Fund:12-5
None authentication ipsvc:2-29
nonparticipating codes
description Intf:2-10
nonParticipating tooltip Fund:13-17
notifications
adding forwards Fund:7-55
conditions for sending Fund:7-65
removing forwards Fund:7-56
NPIV
configuring Fund:B-2
description Intf:9-1
enabling Intf:9-2
NP links Intf:9-4
N-Port identifier virtualization. See NPIV
N port identifier virtualization. See NPIV
NL ports
NP-ports Intf:9-4
NPV
wizard Fund:5-40
NPV, configuring Intf:9-8
NPV mode Intf:9-4
ntop freeware
batch files Fund:9-5
modifying launch scripts Fund:9-5
NTP
CFS support sysmgnt:2-2
logging facility sysmgnt:3-2
time-stamp option ipsvc:2-22
NTP servers
configuring Fund:2-8
Nx ports
FCS support sysmgnt:9-1
O
offline tooltip Fund:13-17
OHMS
configuring Fund:B-3
ohmsExtLBTest tooltip Fund:13-17
Online Certificate Status Protocol. See OCSP
Online Health Management System. See OHMS
Opera
configuring for Java Web Start Fund:13-5
operational states
configuring on Fibre Channel interfaces Intf:2-12
description Intf:2-8
OSCP
support sec:6-5
other tooltip Fund:13-17
out-of-band access
mgmt0 interfaces Fund:2-13
out-of-band management
configuring Fund:2-5, Fund:2-10
Ethernet connection Fund:2-18
out-of-service interfaces
description Intf:5-10
overlay VSANs
configuring ipsvc:5-8
description ipsvc:5-8
oversubscription
disabling restrictions Intf:5-22
enabling restrictions Intf:5-23
Generation 2 switching modules Intf:5-20
ratios Intf:5-20
P
PAA-2s
Cisco Traffic Analyzer Fund:9-3
description Fund:9-2
PAAs
compared with PAA-2s Fund:9-3
packets
discarding in FCIP ipsvc:2-22
parentDown tooltip Fund:13-18
pass-thru routing mode ipsvc:2-34, ipsvc:2-36
passwords
administrator Fund:2-3
assigning using Fabric Manager Fund:5-40
recovering Fund:7-51
recovering (procedure) sec:3-21
setting administrator default Fund:2-9
strong characteristics sec:3-13
pcAnyWhere
replacing with DirectX Fund:13-6
stopping Fund:13-6
PDU ipsvc:2-34
peerFCIPPortClosedConnection tooltip Fund:13-18
peerFCIPPortResetConnection tooltip Fund:13-18
performance
configuring collections Fund:7-62
customizing reports Fund:7-39
custom monitoring Fund:7-27
data Fund:8-3
event triggers Fund:8-2
graphs Fund:11-7
historical monitoring Fund:11-4
host-optimized port groups Fund:11-7
ISL statistics (procedure) Fund:11-3
monitoring Fund:8-1
monitoring in Device Manager (procedure) Fund:11-2
per-port monitoring (procedure) Fund:11-2
real-time monitoring Fund:11-1
summary reports Fund:11-7
tables Fund:11-7
using thresholds Fund:8-2
viewing future predictions Fund:7-26
viewing summaries Fund:7-14
performance buffers
configuring Intf:6-2
description Intf:6-2
performance collections
adding Fund:7-62
configuring thresholds Fund:7-65
removing Fund:7-63
Performance Manager
architecture Fund:8-1
authentication Fund:4-4
configuring data collection Fund:8-3
configuring flows Fund:8-3
configuring with Traffic Analyzer Fund:11-10
creating a flow Fund:11-4
creating collections Fund:11-4
data collection Fund:8-2
data interpolation Fund:8-2
description Fund:2-15
exporting as CSV Fund:11-9
reports Fund:11-6
shows as disabled service Fund:13-6
using thresholds Fund:8-2
verifying collections Fund:3-7
viewing reports Fund:11-6
wizard for configuring Fund:11-5
Performance Manager reports
exporting as XML Fund:11-8
generating top 10 Fund:11-7
viewing events Fund:11-7
viewing graphs Fund:11-7
viewing host-optimized port group performance Fund:11-7
viewing summary reports Fund:11-7
viewing tables Fund:11-7
Performance tab
description Fund:7-13
persistent domain ID
FICON VSANs sec:10-3
persistent FC IDs
configuring IVR:2-12, sysmgnt:8-19
description IVR:2-11, sysmgnt:8-18
enabling sysmgnt:8-19
purging sysmgnt:8-22
PKI
enrollment support sec:6-4
PMTUs
configuring in FCIP profiles ipsvc:2-19
polling periods
changing Fund:3-11
Port Analyzer Adapters 2. See PAA-2s
portBindFailure tooltip Fund:13-18
portBlocked tooltip Fund:13-18
PortChannel
interfaces ipsvc:2-13
subinterfaces ipsvc:2-13
portChannelMembersDown tooltip Fund:13-18
PortChannel modes
description Intf:8-6
PortChannel Protocol
autocreation Intf:8-22
configuring autocreation Intf:8-23
converting autocreated groups to manually configured Intf:8-23
creating channel group Intf:8-21
description Intf:8-20
enabling autocreation Intf:8-23
PortChannels
adding interfaces Intf:8-17, Intf:8-18
administratively down Intf:2-10
comparison with trunking Intf:8-3
compatibility checks Intf:8-18
compatibility with DHCHAP sec:8-3
configuration guidelines Intf:8-10
configuring for FCIP high availability ipsvc:2-5
configuring using Device Manager Fund:6-8
creating Intf:8-16
creation dialog box too small Fund:13-8
default settings Intf:8-25
deleting Intf:8-16
deleting interfaces Intf:8-20
description Intf:8-1
down states Fund:C-2
examples Intf:8-2
forcing interface additions Intf:8-19
Generation 2 switching module interfaces Intf:5-12
incompatible modes Fund:C-2
incompatible remote switch Fund:C-2
incompatible speeds Fund:C-2
interface states Intf:8-18
IQN formats ipsvc:2-9
load balancing Intf:8-4
load balancing (example) ipsvc:2-5
logging facility sysmgnt:3-2
member combinations ipsvc:6-10
misconfiguration error detection Intf:8-11
redundancy ipsvc:2-7
SPAN sources sysmgnt:10-3
verifying configurations Intf:8-24
wizard Fund:5-40
portFabricBindFailure tooltip Fund:13-18
portGracefulShutdown tooltip Fund:13-18
port groups
assigning extended BB_credits Intf:6-17
description Intf:5-3
Generation 2 Fibre Channel switching modules Intf:5-3
Generation 3 Fibre Channel switching modules Intf:5-7
host-optimized performance Fund:11-7
port indexes
description Intf:5-11
port modes
auto Intf:2-7
descriptionIntf:2-3to Intf:2-7
IPS ipsvc:6-4, ipsvc:7-1
port rate modes
configuring Intf:5-19
dedicated Intf:5-6
description Intf:5-4
oversubscribed Intf:5-7
shared Intf:5-7
ports
disabling using Device Manager Fund:6-8
enabling using Device Manager Fund:6-8
virtual E ipsvc:2-2
Port Security
wizard Fund:5-40
port security
activating sec:9-9
activation sec:9-3
activation rejection sec:9-10
auto-learning sec:9-2
CFS support sysmgnt:2-2
cleaning up databases sec:9-23
compatibility with DHCHAP sec:8-3
configuration guidelines sec:9-3
configuring CFS distributionsec:9-17to sec:9-20
copying databases sec:9-22
database interactions sec:9-20
database merge guidelines sec:9-20
data scenarios sec:9-21
deactivating sec:9-9
default settings sec:9-24
deleting databases sec:9-23
deleting entries from database (procedure) sec:9-17
disabling sec:9-8
displaying settings (procedure) sec:9-11
displaying statistics (procedure) sec:9-12
enabling sec:9-8
enforcement mechanisms sec:9-2
fabric binding comparison sec:10-1
forcing activation sec:9-10
license requirement sec:9-2
manual configuration guidelines sec:9-4
preventing unauthorized accesses sec:9-1
unauthorized accesses prevented sec:9-1
WWN identification sec:9-16
port security auto-learning
description sec:9-2
device authorization sec:9-14
disabling sec:9-13
distributing configuration sec:9-19
enabling sec:9-12
guidelines for configuring with CFS sec:9-3
guidelines for configuring without CFS sec:9-4
port security databases
cleaning up sec:9-23
copying sec:9-22
copying active to config (procedure) sec:9-11
deleting sec:9-23
interactions sec:9-20
manual configuration guidelines sec:9-4
merge guidelines sec:9-20
reactivating sec:9-11
scenarios sec:9-21
port speeds
configuring Intf:2-12
configuring on Generation 2 switching module interfaces Intf:5-18
portVsanMismatchIsolation tooltip Fund:13-18
preferences
Confirm Deletion default Fund:5-34
default Fund:5-33
Device Manager Fund:6-10
Export Tables with Format default Fund:5-34
Fabric Manager Clients Fund:5-33
Show CFS Warnings default Fund:5-34
Show Device Name by default Fund:5-33
Show End Device Using default Fund:5-34
Show Shortened iSCSI Names default Fund:5-34
Show Timestamps as Date/Time default Fund:5-34
Show WorldWideName (WWN) Vendor default Fund:5-34
Telnet Path default Fund:5-34
Use Secure Shell instead of Telnet default Fund:5-34
preshared keys
RADIUS sec:4-10
TACACS+ sec:4-19
principal switches
assigning domain ID sysmgnt:8-12
promiscuous mode
configuring Gigabit Ethernet interfaces ipsvc:6-7, ipsvc:7-4
protocol ipsvc:2-1
protocols
VRRP ipsvc:2-9
proxy initiator
configuringiSCSI
configuring proxy initiator ipsvc:2-22
proxy initiator mode ipsvc:2-15, ipsvc:2-26
configuring ipsvc:2-21
zoning ipsvc:2-23
proxy initiator modeiSCSI
proxy initiator mode ipsvc:2-21
Public Key Infrastructure. See PKI
Pv6 address formats ipsvc:8-11
pWWNs
converting dynamic to static ipsvc:2-20
Q
QoS
DSCP value ipsvc:2-25
logging facilities sysmgnt:3-2
wizard Fund:5-40
QoS values
configuring ipsvc:2-34
R
RADIUS ipsvc:2-58
AAA authentication ipsvc:2-29, ipsvc:2-44
AAA protocols sec:4-1
CFS merge guidelines sec:4-30
CFS support sysmgnt:2-2
clearing configuration distribution sessions sec:4-30
configuring an iSCSI RADIUS serveriSCSI
configuring a RADIUS server ipsvc:2-32
configuring Cisco ACSsec:4-34to sec:4-37
configuring server monitoring parameters sec:4-12
configuring test idle timer sec:4-14
configuring test user name sec:4-15
default settings sec:4-38
description sec:4-10
discarding configuration distribution changes sec:4-30
enabling configuration distribution sec:4-28
FabricWare support Fund:D-2
sending test messages for monitoring sec:4-16
setting preshared keys sec:4-10
specifying time-out sec:4-11
starting a distribution session sec:4-29
rate modes
configuring on Generation 2 switching module interfaces Intf:5-19
rcfInProgres tooltip Fund:13-18
RCFs
description sysmgnt:8-3
incoming sysmgnt:8-9
rejecting incoming sysmgnt:8-9
reason codes
description Intf:2-8
description (table) Fund:C-1
receive buffer groups. See buffer groups
receive data field sizes
configuring Intf:6-19
reconfigure fabric frames. See RCFs
recovery
from powered-down state Intf:5-12
passwords Fund:7-51
Red Hat Linux
Fabric Manager Server Fund:3-1
redundancy
Ethernet PortChannels ipsvc:2-6, ipsvc:2-7
Fibre Channel PortChannels ipsvc:2-7
VRRP ipsvc:2-6
remote AAA server
delayed authentication Fund:4-2
remote file systems
accessing Fund:B-2
remote SPAN
configuring Fund:B-2
resources
management Fund:2-17
RMON
alarms sysmgnt:7-1
configuring using Threshold Manager sysmgnt:7-2
default settings sysmgnt:7-14
defining an event (procedure) sysmgnt:7-12
enabling alarms sysmgnt:7-2
enabling alarms (procedure) sysmgnt:7-9
events sysmgnt:7-1
setting alarms (procedure) sysmgnt:7-3, sysmgnt:7-4, sysmgnt:7-6
viewing alarms (procedure) sysmgnt:7-13
viewing logs (procedure) sysmgnt:7-14
role-based management
controlling access Fund:5-40
role databases
disabling distribution sec:3-9
enabling distribution sec:3-9
viewing with Fabric Manager sec:3-10
roles
adding web services roles Fund:7-60
CFS support sysmgnt:2-2
configuring rules sec:3-3
default permissions sec:4-3
default setting sec:3-22
deleting (procedure) sec:3-3
privileges Fund:5-40
removing web services roles Fund:7-61
user profiles sec:4-4
round-trip response time
monitoring Fund:9-3
router discovery
IPv6 ipsvc:8-9
RRD
configuring database Fund:7-66
RSA key-pairs
deleting sec:6-16
description sec:6-3
generating sec:6-6
multiple sec:6-4
rsa key pairs
generating sec:3-17
RSCNs ipsvc:2-17
logging facility sysmgnt:3-2
RSCN timers
CFS support sysmgnt:2-2
RSPAN
advantages sysmgnt:10-14
configuring Fund:B-2, sysmgnt:10-16
description sysmgnt:10-13
explicit paths sysmgnt:10-18
monitoring traffic sysmgnt:10-16
monitoring traffic (example)sysmgnt:10-19to sysmgnt:10-21
tunnels sysmgnt:10-14
rules
configuring sec:3-3
S
SACKs
configuring in FCIP profiles ipsvc:2-19
SAN extension tuner
configuring Fund:B-2, ipsvc:3-3
data patterns ipsvc:3-3
default settings ipsvc:3-6
description ipsvc:3-1
license requirements ipsvc:3-3
tuning guidelines ipsvc:3-2
SAN operating system. See Cisco MDS SAN-OS
SAs
establishing between IPsec peers sec:7-28
lifetime negotiations sec:7-30
refreshing sec:7-20
setting lifetime sec:7-31
scheduler. See command scheduler
schedulers. See command schedulers
schedules
command scheduler sysmgnt:5-1
SCP
support Fund:2-16
scripts
FMServer.sh Fund:2-36
SCSI
monitoring frame counts Fund:9-3
monitoring I/Os per second Fund:9-3
monitoring read throughput Fund:9-3
monitoring traffic throughput Fund:9-3
routing requests ipsvc:2-2
SCSI flow services
CFS support sysmgnt:2-2
SCSI sessions
monitoring status Fund:9-3
SD port mode
description Intf:2-6
interface modes Intf:2-6
SD ports
bidirectional traffic sysmgnt:10-12
characteristics sysmgnt:10-5
Cisco Traffic Analyzer Fund:9-4
configuring Intf:2-12
configuring for SPAN monitoring sysmgnt:10-6
monitoring bidirectional traffic sysmgnt:10-12
RSPAN sysmgnt:10-13
Secure Hash Algorithm. See SHA-1
security
accounting sec:4-4
managing on the switch sec:4-1
security associations. See SAs
security control
local sec:4-2
remote AAA servers sec:4-9
security parameter index. See SPI
selective acknowledgments. See SACKs
serial console ports
accessing switches Fund:2-13
serial IDs
description sysmgnt:4-35
server groups
configuring sec:4-26
services
restarting Fund:7-51
starting Fund:7-51
stopping Fund:7-51
services modules
replacing Fund:12-18
setup command
using Fund:2-12
SFPs
displaying transmitter types Intf:2-19
not present reason codes Fund:C-1
transmitter types Intf:2-18
SFTP
support Fund:2-16
SHA-1
IKE sec:7-7
IPsec sec:7-7
shared rate mode
description Intf:5-7
migrating from dedicated rate mode Intf:5-16, Intf:5-17
migrating to dedicated rate mode Intf:5-15, Intf:5-16
oversubscription Intf:5-20
shell scripts
$HOME/.cisco_mds9000/bin directory Fund:13-4
DeviceManager.sh Fund:13-4
FabricManager.sh Fund:13-4
for uninstalling Fabric Manager Fund:2-46
shortcuts
not visible on desktops Fund:13-4
site IDs
description sysmgnt:4-34
SMTP
assigning contact names sysmgnt:4-8
SNMP
access control sysmgnt:6-2
access groups sysmgnt:6-3
adding communities sysmgnt:6-7
assigning contact sysmgnt:6-2
assigning location sysmgnt:6-2
configuring event security sysmgnt:6-14
configuring event security (procedure) sysmgnt:6-14
configuring LinkUp/LinkDown notifications sysmgnt:6-13
configuring notification target users sysmgnt:6-12
creating roles sec:3-11
creating users sysmgnt:6-4
default settings sysmgnt:6-15
deleting communities sysmgnt:6-7
deleting community strings (procedure) sysmgnt:6-7
enabling access Fund:2-7
enabling SNMP notifications sysmgnt:6-9
encryption-based privacy sysmgnt:6-4
group-based access sysmgnt:6-3
mapping CLI operations sec:3-11
modifying users sysmgnt:6-4
port used Fund:2-43
proxy services Fund:2-14
read-only access sysmgnt:6-7
read-write access sysmgnt:6-7
security features sec:4-2
server contact name sysmgnt:4-5
users with multiple roles (procedure) sysmgnt:6-6
user synchronization with CLI sysmgnt:6-3
Version 3 security features sysmgnt:6-2
versions supported sysmgnt:6-1
viewing event log sysmgnt:6-14
See also SNMPv1; SNMPv2c; SNMPv3
SNMP_TRAP
port used Fund:2-43
SNMP community strings
configuring Fund:2-10
SNMP manager
FCS sysmgnt:9-2
SNMP preferences
Enable Audible Alert when Event Received default Fund:5-34
Retry request 1 time(s) after 5 sec timeout default Fund:5-34
Trace SNMP packets in Log default Fund:5-34
SNMPv1
community strings sysmgnt:6-2
description sysmgnt:6-2
FabricWare support Fund:D-2
support Fund:2-16
SNMPv2
community strings sysmgnt:6-2
FabricWare support Fund:D-2
SNMPv2c
configuring notifications sysmgnt:6-8
description sysmgnt:6-2
support Fund:2-16
SNMPv3
assigning multiple roles sysmgnt:6-6
CLI user managementSNMPv3
AAA integration sysmgnt:6-2
configuring notifications sysmgnt:6-9
description sysmgnt:6-2
enforcing message encryption sysmgnt:6-5
restricting switch access sysmgnt:6-3
security features sysmgnt:6-2
specifying cisco-av-pair sec:4-17
support Fund:2-16
See also SNMP sysmgnt:6-2
software images
default settings Fund:12-19
selecting for supervisor modules Fund:12-3
space requirements Fund:12-4
upgrading SAN-OS images Fund:12-1
variables Fund:12-1
software installation
Software Installation Wizard Fund:12-8
software upgrades
disruptive Fund:12-5
mechanisms Fund:12-5
Software Installation Wizard Fund:12-8
Solaris Fund:2-36
Fabric Manager Server Fund:3-1
installing Fabric Manager Web Services Fund:7-4
install scripts Fund:2-36
source IDs
Call Home event format sysmgnt:4-35
exchange based Intf:8-5
flow based Intf:8-4
SPAN
configuration guidelines sysmgnt:10-6
configuringsysmgnt:10-6to sysmgnt:10-10
configuring Fibre Channel analyzers sysmgnt:10-11
configuring on switch ports Fund:9-4
configuring sessions sysmgnt:10-5
conversion behavior sysmgnt:10-9
default settings sysmgnt:10-21
description sysmgnt:10-1
egress sources sysmgnt:10-2
FC analyzers sysmgnt:10-10
filters sysmgnt:10-5
monitoring traffic Fund:9-1, sysmgnt:10-1
SD ports sysmgnt:10-5
sessions sysmgnt:10-5
sources sysmgnt:10-2, sysmgnt:10-4
sources for monitoring sysmgnt:10-2
VSAN sources sysmgnt:10-4
SPAN destination port mode. See SD port mode
SPAN filters
description sysmgnt:10-5
guidelines sysmgnt:10-5
SPAN ports
viewing detailed traffic information Fund:7-25
SPAN sessions
deleting using Device Manager sysmgnt:10-9
description sysmgnt:10-5
VSAN filters sysmgnt:10-5
SPAN sources
editing with Device Manager sysmgnt:10-8
egress sysmgnt:10-2
ingress sysmgnt:10-2
interface types sysmgnt:10-3
IPS ports sysmgnt:10-3
VSANs configuration guidelines sysmgnt:10-4
SPAN tunnel port mode. See ST port mode
SPI
configuring virtual routers ipsvc:5-14
srcPortNotBound tooltip Fund:13-18
SSH
default service sec:3-16
description sec:3-17
digital certificate authentication sec:3-20
enabling Fund:2-8, Fund:2-11, sec:3-20
FabricWare support Fund:D-2
generating server key-pairs sec:3-17
logins sec:4-5
overwriting server key-pairs sec:3-18
port used Fund:2-43
specifying keys sec:3-18
support Fund:2-16
SSH key pairs
overwriting sec:3-18
SSH sessions
message logging sysmgnt:3-4
SSI boot images
configuring Fund:B-2
SSL certificates
using with Fabric Manager Web Services Fund:7-5
SSMs
managing Fund:B-2
standby supervisor modules
boot alert Fund:12-18
boot variable version Fund:12-17
copying image to Fund:B-2
managing bootflash: Fund:12-17
startup configuration files
unlocking Fund:B-2
statically imported iSCSI targets ipsvc:2-53
static iSLB initiator
converting ipsvc:2-41
static mapped iSCSI targetiSCSI
static mapped target ipsvc:2-28
static mapping ipsvc:2-41
static routes
configuring Fund:2-7
static WWN mapping ipsvc:2-26
statistics
SCSI I/O Fund:9-3
storage devices
performance statistics Fund:8-1
storage traffic
viewing performance information Fund:7-23
store-and-forward routing mode ipsvc:2-34, ipsvc:2-36
ST port mode
description Intf:2-7
interface modes Intf:2-7
limitations Intf:2-7
ST ports
interface modes Intf:2-7
RSPAN sysmgnt:10-13
RSPAN characteristics sysmgnt:10-15
subnet masks
configuring mgmt0 interfaces Intf:2-27
configuring switches Fund:2-3
initial configuration Fund:2-7, Fund:2-11
subnets
requirements ipsvc:6-7, ipsvc:7-5
summary reports
description Fund:7-1
Sun JRE
Fabric Manager support Fund:2-19
Supervisor-1 modules
migrating from Supervisor-2 modules (note) Fund:12-17
selecting software images Fund:12-3
Supervisor-2 modules
Generation 1 chassis Fund:12-18
select software images Fund:12-3
supervisor modules
managing standby bootflash: Fund:12-17
replacing Fund:12-17, Fund:12-18
standby boot alert Fund:12-18
standby supervisor boot variable version Fund:12-17
upgrading a dual supervisor switch Fund:B-1
viewing using Device Manager Fund:6-8
suspendedByMode tooltip Fund:13-18
suspendedBySpeed tooltip Fund:13-18
suspendedByWWN tooltip Fund:13-18
swFailure tooltip Fund:13-18
Switched Port Analyzer. See SPAN
switches
accessing Fund:2-13
initial setup Fund:2-2
starting Fund:2-1
starting up Fund:B-1
upgrading with dual supervisors Fund:B-1
viewing license information Fund:7-33
switching modules
replacing Fund:12-18
viewing using Device Manager Fund:6-8
switch management
architecture Fund:2-17
in-band Fund:2-18, ipsvc:5-7
out-of-band Fund:2-18
switchovers
VRRP ipsvc:2-6
switch port interfaces
configuring default Fund:2-11
switch ports
configuring attribute default values Intf:2-18
configuring trunk modes Fund:2-11
switch priorities
configuring sysmgnt:8-7
default sysmgnt:8-7
description sysmgnt:8-7
switch security
default settings sec:3-22, sec:4-37
sWWNs
configuring for fabric binding sec:10-3
syslog
CFS support sysmgnt:2-2
configuration distribution sysmgnt:3-13
fabric merge guidelines sysmgnt:3-14
port used Fund:2-43
viewing information Fund:7-11
viewing registration information Fund:7-54
viewing with Events tab Fund:7-9
syslog servers
verifying using Fabric Manager Web Services sysmgnt:3-10
system health
initiating Fund:B-3
system images
description Fund:12-2
selecting for supervisor modules Fund:12-3
SYSTEM variable Fund:12-1
system messages
configuring logging sysmgnt:3-4
configuring logging servers sysmgnt:3-8
default settings sysmgnt:3-14
logging server sysmgnt:3-1
monitoring sysmgnt:3-1
severity levels sysmgnt:3-3
viewing Fund:7-11
viewing from Device Manager sysmgnt:3-12
viewing from Fabric Manager Web Server sysmgnt:3-12
viewing using Device Manager Fund:10-4
viewing using Fabric Manager Web Server Fund:10-4
viewing with Events tab Fund:7-9
T
tables
filtering Fund:7-3
navigating Fund:7-3
searching for information Fund:7-3
TACACS+
AAA authentication ipsvc:2-44
AAA protocols sec:4-1
CFS merge guidelines sec:4-30
CFS support sysmgnt:2-2
clearing configuration distribution sessions sec:4-30
configuring Cisco ACSsec:4-34to sec:4-37
default settings sec:4-38
description sec:4-18
discarding configuration distribution changes sec:4-30
displaying server statistics sec:4-25
enabling sec:4-19
enabling configuration distribution sec:4-28
global keys sec:4-19
sending test messages for monitoring sec:4-24
setting default server encryption sec:4-19
setting default server timeout sec:4-20
setting global secret keys sec:4-20
setting preshared key sec:4-19
setting server addresses sec:4-19
setting server monitoring parameters sec:4-22
setting timeout value sec:4-20
specifying server at login sec:4-25
starting a distribution session sec:4-29
validating sec:4-24
target discovery ipsvc:2-74
TCP connections
FCIP profiles ipsvc:2-4
TCP parameters
TCP ports
IPv4-ACLs sec:5-4
TCP tuning parameters ipsvc:2-33
Telnet
enabling Fund:2-8, Fund:2-11, sec:3-20
logins sec:4-5
port used Fund:2-43
support Fund:2-16
Telnet sessions
message logging sysmgnt:3-4
templates
creating for custom reports Fund:7-39
modifying custom report templates Fund:7-47
TE port mode
classes of service Intf:2-6
description Intf:2-6
TE ports
fabric binding checking sec:10-2
FCS support sysmgnt:9-1, sysmgnt:9-2
SPAN sources sysmgnt:10-3
trunking restrictions Intf:7-3
terminals
configuring settings Fund:B-1
TF port mode
classes of service Intf:2-6
description Intf:2-6
TFTP
port used Fund:2-43
support Fund:2-16
Threshold Manager
configuring RMON sysmgnt:7-2
thresholds
baselines for performance Fund:8-2
time delays
setting Fund:B-2
TL port mode
classes of service Intf:2-5
description Intf:2-5
TL ports
ALPA caches Intf:2-22
configuring Intf:2-12, Intf:2-22
description Intf:2-20
FCS support sysmgnt:9-1, sysmgnt:9-2
logging facility sysmgnt:3-2
SPAN sources sysmgnt:10-3
tooManyInvalidFLOGIs tooltip Fund:13-18
topologies
clearing maps Fund:13-21
mapping Fund:10-2
topology map
mapping multiple fabrics Fund:10-3
topology maps
custom Fund:10-2
description Fund:10-2
enclosures Fund:10-3
saving custom layouts (procedure) Fund:10-2
tovMismatch tooltip Fund:13-18
traffic
managing using Cisco Traffic Analyzer Fund:9-2
monitoring using Cisco Traffic Analyzer Fund:9-2
Traffic Analyzer. See Cisco Traffic Analyzer
transform sets
description sec:7-25
transient failure ipsvc:2-17
transit VSANs
configuration guidelines IVR:1-11
IVR configuration guidelines IVR:2-7
translative loop port mode. See TL port mode
transparent initiator mode ipsvc:2-15
transparent initiator modeiSCSI
transparent initiator mode ipsvc:2-21
traps
viewing registration information Fund:7-54
Triple DES. See 3DEC encryption
troubleshooting
CTC ipsvc:2-17
Fabric Manager tools Fund:5-41
trunk-allowed VSAN lists
descriptionIntf:7-9to Intf:7-11
trunking
comparison with PortChannels Intf:8-3
configuration guidelines Intf:7-4
configuring modes Intf:7-7
configuring using Device Manager Fund:6-8
default settings Intf:7-11
description Intf:7-1
link state Intf:7-7, ipsvc:2-17
merging traffic Intf:7-4
restrictions Intf:7-3
trunking E port mode. See TE port mode
trunking F port mode. See TF port mode
trunking mode
FCIP interface ipsvc:2-4
trunking protocol
default settings Intf:7-11, Intf:7-12
default state Intf:7-6
description Intf:7-6
detecting port isolation Intf:7-4
disabling Intf:7-7
enabling Intf:7-7
trunk mode
configuring Intf:7-7, Intf:7-8
default settings Intf:7-11
status Intf:7-7
trunkNotFullyActive tooltip Fund:13-18
trust points
creating sec:6-8
description sec:6-2
multiple sec:6-3
saving configuration across reboots sec:6-13
TrustSec FC Link Encryption sec:11-2
Best Practices sec:11-13
enabling sec:11-2
ESP Settings sec:11-5
ESP Wizard sec:11-8
Information sec:11-11
Security Association Parameters sec:11-3
Security Associations sec:11-3
Supported Modules sec:11-2
Terminology sec:11-1
U
UDP ports
IPv4-ACLs sec:5-4
UDP traffic
blocking Fund:2-14
unique area FC IDs
configuring sysmgnt:8-20
description sysmgnt:8-20
UNIX
install scripts Fund:2-36
launching Fabric Manager Web Services Fund:7-7
UNIX issues
parent menus disappear Fund:13-12
too many open files error Fund:13-12
web browser cannot find web server Fund:13-12
upgradeInProgress tooltip Fund:13-18
upgrades. See disruptive upgrades; nondisruptive upgrades; software upgrades
upgrading
switches Fund:B-1
user accounts
configuringsec:3-12to sec:3-16
creating additional at setup Fund:2-5
displaying information sec:3-16
password characteristics sec:3-13
User-based roles
FabricWare support Fund:D-2
user IDs
authentication sec:4-3
user profiles
role information sec:4-4
users
adding Fund:7-59
CFS support sysmgnt:2-2
configuring sec:3-14
default Fund:2-3
deleting (procedure) sec:3-15
description sec:3-13
displaying account information sec:3-16
removing Fund:7-60
SNMP support sysmgnt:6-4
V
vendor-specific attributes. See VSAs
VE ports
description ipsvc:2-2
FCIP ipsvc:2-2
virtual FC interface
assigning to VSANs Intf:4-8
configuring Intf:4-2
Device Manager Intf:4-4
Fabric Manager Intf:4-2
creating
Device Manager Intf:4-14
Fabric Manager Intf:4-13
default settings Intf:4-16
deleting Intf:4-15
limitations Intf:4-1
overview Intf:4-1
virtual Fibre Channel host ipsvc:2-3
virtual interface
configuring
FCoE Configuration Wizard Intf:4-9
virtual ISLs
description ipsvc:2-2
virtual router IDs. See VR IDs
Virtual Router Redundancy Protocol. See VRRP
Virtual Router Redundancy Protocolprotocols
Virtual Router Redundancy ipsvc:2-36
virtual routers
adding ipsvc:5-12
adding primary IP addresses ipsvc:5-13
authentication ipsvc:5-14
default settings ipsvc:5-15
deleting ipsvc:5-12
initiating ipsvc:5-13
setting priorities ipsvc:5-13
Visio diagrams
saving maps as Fund:5-30
VLANs
configuring on Gigabit Ethernet subinterfaces ipsvc:7-5
description ipsvc:6-7, ipsvc:7-5
mapping to VSANs Intf:4-5
using Device Manager Intf:4-7
using Fabric Manager Intf:4-5
VR IDs
description ipsvc:5-11
mapping ipsvc:5-11
VRRP ipsvc:2-36
backup switches ipsvc:5-11
configuring advertisement time intervals ipsvc:5-13
configuring for Gigabit Ethernet interfaces ipsvc:6-10
configuring for iSLB ipsvc:2-46
configuring virtual routers ipsvc:5-12
default settings ipsvc:5-15
description ipsvc:5-11, ipsvc:6-9
group members ipsvc:6-9
initiating virtual routers ipsvc:5-13
IQN formats ipsvc:2-9
iSCSI parameter change impact ipsvc:2-46
logging facility sysmgnt:3-3
master switches ipsvc:5-11
MD5 authentication ipsvc:5-14
primary IP address ipsvc:5-13
priority preemption ipsvc:5-13
security authentication ipsvc:5-14
setting priorities ipsvc:5-13
setting priority ipsvc:5-13
simple text authentication ipsvc:5-14
VRRP group ipsvc:2-24
VRRP-I f iSCSI login redirect ipsvc:2-38
VSAN IDs
allowed list Intf:7-11
multiplexing traffic Intf:2-6
vsanInactive tooltip Fund:13-18
VSAN interfaces
configuring Intf:2-28
creating Intf:2-28
description Intf:2-28
vsanMismatchIsolation tooltip Fund:13-18
VSAN policies
default roles sec:3-22
VSANs
allowed-active Intf:7-4
allowed list sysmgnt:10-4
compatibility with DHCHAP sec:8-3
configuring allowed-active lists Intf:7-11
configuring multiple IPv4 subnets ipsvc:5-9
configuring trunk-allowed listsIntf:7-9to Intf:7-11
domain ID automatic reconfiguration sysmgnt:8-10
example membership for iSCSI devices ipsvc:2-24
FCS sysmgnt:9-1
FCS support sysmgnt:9-1
flow statistics Fund:8-6
gateway switches ipsvc:5-6
IPv4 static routing ipsvc:5-7
iSLB ipsvc:2-41
iSLB initiators ipsvc:2-41
mismatches Fund:C-2, Intf:2-10
overlaid routes ipsvc:5-8
Rules and features sec:3-4
SPAN filters sysmgnt:10-5
SPAN source sysmgnt:10-4
SPAN sources sysmgnt:10-4
TE port mode Intf:2-6
TF port mode Intf:2-6
traffic routing between ipsvc:5-1
transit IVR:2-10
trunk-allowed Intf:7-4
VRRP ipsvc:5-11
wizard Fund:5-40
VSAs
communicating attributes sec:4-16
protocol options sec:4-17
W
window management
configuring in FCIP profiles ipsvc:2-19
Windows
Fabric Manager Server Fund:3-1
Fabric Manager support Fund:2-19
installing Fabric Manager Web Services Fund:7-4
Windows issues
blue screen Fund:13-11
Device Manager window content disappears Fund:13-11
Fabric Manager window content disappears Fund:13-11
icons disappear from desktop Fund:13-11
printing causes an application crash Fund:13-11
SCP/SFTP failures Fund:13-12
text fields are too small Fund:13-11
Windows XP hangs Fund:13-11
Windows workstations
modifying Fund:2-15
wizards
DPVM Wizard Fund:5-40
FCIP Wizard Fund:5-40
FCoE Configuration Wizard Fund:5-40
IP ACL Wizard Fund:5-40
iSCSI Wizard Fund:5-40
IVR Zone Wizard Fund:5-40
License Install Wizard Fund:5-40
NPV Wizard Fund:5-40
PortChannel Wizard Fund:5-40
Port Security Wizard Fund:5-40
QoS Wizard Fund:5-40
Software Install Wizard Fund:5-40
VSAN Wizard Fund:5-40
Zone Edit Tool Wizard Fund:5-40
WWNs
port security sec:9-16
static binding ipsvc:2-21
suspended connection Fund:C-2
suspended connections Intf:2-10
X
XML
support Fund:2-17
Z
zoneMergeFailureIsolation tooltip Fund:13-18
zone policies
configuring Fund:2-11
zoneRemoteNoRespIsolation tooltip Fund:13-18
zones
configuration guidelines IVR:2-14
configuring and activating for iSLB ipsvc:2-42
differences with IVR zones IVR:1-14
displayed as bold Fund:13-9
iSLB ipsvc:2-42
IVR communication IVR:1-14
logging facility sysmgnt:3-3
merge failures Intf:2-10
read-only for IVR IVR:2-15
troubleshooting tools Fund:5-41
viewing inventory information Fund:7-38
wizard Fund:5-40
zoning
FabricWare support Fund:D-1
zoning based access control
configuring for iSCSI ipsvc:2-26
configuring for iSCSIiSCSI
configuring zoning based access control ipsvc:2-26
Feedback