Guest

Cisco Video Surveillance 4000 Series IP Cameras

Release Notes for Cisco Video Surveillance High Definition IP Camera Release 2.3.0

  • Viewing Options

  • PDF (119.3 KB)
  • Feedback
Release Notes for Cisco Video Surveillance High Definition IP Camera Release 2.3.0

Table Of Contents

Release Notes for Cisco Video Surveillance High Definition IP Camera Release 2.3.0

Contents

What's New in this Release

Features no Longer Available

Upgrading to Release 2.3.0

Caveats

Related Documentation

Obtaining Documentation, Obtaining Support, and Security Guidelines


Release Notes for Cisco Video Surveillance High Definition IP Camera Release 2.3.0


June, 2011

These release notes provide important information for the Cisco Video Surveillance high definition IP camera release 2.3.0.

Firmware release 2.3.0 applies to the following Cisco IP camera models:

CIVS-IPC-4300

CIVS-IPC-4500

This firmware is compatible with Cisco Video Surveillance Manager (VSM) 6.3.2 and later. VSM 6.3.2 and later contains a camera firmware upgrade feature that simplifies and automates the firmware upgrade process.

Contents

This document includes the following sections:

What's New in this Release

Features no Longer Available

Upgrading to Release 2.3.0

Caveats

Related Documentation

Obtaining Documentation, Obtaining Support, and Security Guidelines

What's New in this Release

Cisco Video Surveillance high definition IP camera firmware release 2.3.0 provides the following new features and updates:

Enhanced Motion Detection—Improved motion detection algorithm that results in better accuracy and ease of deployment.

Support for Windows 7 Enterprise and Internet Explorer 8.

Features no Longer Available

The following IP camera features are not available in this release:

The USB port on an IP camera does not support a USB device for storing video

Video clip for e-mail event notification—Attaching a video clip of an event to an e-mail notification is no longer supported

Upgrading to Release 2.3.0


Caution You can upgrade an IP camera to firmware release 2.3.0 from firmware release 1.2.1 or higher.

You can upgrade your IP camera to firmware 2.3.0 by using the Camera Firmware Upgrade feature in the VSM Management Console. For instructions, see the "Using the VSM Management Console" chapter in Cisco Video Surveillance Manager User Guide.

Alternatively, you can upgrade your IP camera to release 2.3.0 by performing the following steps.

Procedure


Step 1 Take these actions to obtain the release 2.3.0 firmware:

a. Go to this URL:

http://www.cisco.com/en/US/products/ps9716/index.html

b. Click the Download Software link, log in to Cisco.com, and locate the 2.3.0 firmware file, which is named CIVS-IPC-4xxx-V2.3.0-188.bin.

c. Double-click the 2.3.0 firmware file name and follow the on-screen prompts to download it to your PC.

Step 2 Take these actions to display the Firmware window in the web interface for your IP camera:

a. Start Internet Explorer and enter the following in the address field:

protocol://ip_address:port_number

where:

protocol is the connection that you use for your IP camera (either HTTPS or HTTP).

ip_address is the IP address of your IP camera.

port_number is the port number that is used for HTTPS or HTTP connections to the IP camera. You do not need to enter a port number if you are connecting through the default HTTPS port 443 or the default HTTP port 80.

b. Enter your IP camera user name and password when prompted, then click OK.

The IP Camera Main window appears.

c. Click the Setup link to access configuration menus for the camera.

d. Click Administration, then click Firmware.

The Firmware window appears.

Step 3 In the Firmware window, click the Upgrade button.

The Upgrade Firmware window appears.

Step 4 In the Upgrade Firmware window, click the Browse button, choose the upgrade file, and then click Open.

The upgrade file may be stored on another PC.

Step 5 Click Upgrade and follow the on-screen prompts to load the firmware upgrade on the IP camera.

Do not power down the IP camera during the upgrade procedure.

After you upgrade firmware, the IP camera restarts automatically. It retains all configuration information.


Caveats

Table 1 describes the caveats that are resolved in this release.

Table 1 Caveats Resolved in this Release 

Identifier
Description

CSCte29032

Camera UI upgrade tool fails sometimes with error message


Table 2 describes the caveats that are open in this release.

Table 2 Caveats Open in this Release 

Identifier
Description

CSCtf87756

Users sometime logged out after resetting the camera when using static IP addresses

CSCtg22847

Camera UI hotspot Pan/Tilt command does not work correctly in certain resolutions

CSCtg73910

PEAP authentication fails when using Validate Server Certificate option

CSCtg76338

When using e-mail notification for motion events, if the e-mail server is unreachable, video stops streaming

CSCtg81428

Motion detection windows configured from VSM do not show the same boundaries on camera UI

CSCtg93230

Change in video resolution changes motion detection area

CSCtj42755

Browser logs out of the Analytics web UI after prolonged inactivity

CSCtj68155

In Edit mode, existing rules may not display in Analytics web UI

CSCtk33308

Upgrade from 1.2.1 to latest firmware using camera web UI may give false error

CSCtk75349

Missing duplex and power parameters in CDP

CSCto34506

DirectShow setup may sometimes fail

CSCto40637

Video distortion may occur when viewing multiple cameras on the same PC

CSCtn22813

H.264 video may stutter in Web UI if AAC audio codec is enabled


You can use the Bug Toolkit to find information about caveats (bugs) for the this release, including a description of the problems and available workarounds. The Bug Toolkit lists open and resolved caveats.

To access Bug Toolkit, you need an Internet connection and a Cisco.com user ID and password.

To use the Bug Toolkit, follow these steps:

Procedure


Step 1 To access the Bug Toolkit, go to http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs.

Step 2 Log in with your Cisco.com user ID and password.

Step 3 To look for information about a specific problem, enter the bug ID number in the Search for bug ID field, then click Go.

Step 4 To look for information if you do not know the bug ID number:

a. Choose Security from the Select Product Category menu.

b. Choose the desired product from the Select Product menu.

c. Choose the version number from the Software Version menu.

d. Under Advanced Options, choose Use default settings or Use custom settings. The default settings search for severity 1, 2 and 3 bugs, open and fixed bugs, and only bugs containing bug details. Use the custom settings to change the severity and status parameters, or to search for keywords within the bug headline and description.


Related Documentation

For additional information about the Cisco Video Surveillance IP camera, see the User Guide for your IP camera. User Guides are available at this URL:

www.cisco.com/go/ipcamera

Obtaining Documentation, Obtaining Support, and Security Guidelines

For information about obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html