The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter provides information about the Cisco Video Analytics apps for Cisco IP cameras. These apps enable an IP camera to perform various analytic and counting functions. Analytic functions trigger events when a camera detects activities or behaviors that match predefined rules. Counting functions count people.
The Cisco Video Analytics apps include the following:
Table 4-1 shows the features that each Cisco Video Analytics app provides. You can enable up to five features at a time for the app that you are running.
For information about configuring and operating the Cisco Video Analytics apps on an IP camera, see
Cisco Video Analytics Apps Reference Guide
, which is available at
http://www.cisco.com/c/en/us/
support/physical-security/ip-camera-applications-utilities/products-technical-reference-list.html
.
To run a Cisco Video Analytics app on an IP camera, perform the following steps. The IP camera can run one Cisco Video Analytics app at a time.
Step 1 From the IP camera web-based user interface, click the Setup link, click Application Manager to expand the menu, then click App Setup .
Step 2 Click one of the following radio buttons to choose the app that you want to run.
The buttons that appear on your system depend on which apps you installed.
Step 3 (Optional) If you want the Video Analytics app to run automatically each time the IP camera reboots, in the Installed Application List area, check the Start on Boot check box that corresponds to this app.
If you do not check this check box, you must run the app manually each time the IP camera reboots.
To stop a Cisco Video Analytics app on an IP camera, follow these steps:
Step 1 From the IP camera web-based user interface, click the Setup link, click Application Manager to expand the menu, then click App Setup .
Step 2 Click the radio button for the app that you want to stop: