Cisco Physical Access Manager Appliance User Guide, Release 1.1.0
Specifications for the Cisco Physical Access Manager Appliance
Downloads: This chapterpdf (PDF - 333.0KB) The complete bookPDF (PDF - 36.19MB) | Feedback

Hardware Specifications for the Cisco PAM Appliance

Table Of Contents

Hardware Specifications for the Cisco PAM Appliance


Hardware Specifications for the Cisco PAM Appliance


Table C-1 describes the specifications for the Cisco PAM appliance.

Table C-1 Environmental Specifications 

Dimensions

1.7 in. high (4.3 cm)

17 in. wide (43.2 cm)

20 in. deep (50.8 cm)

Weight

15.0 lb (6.8 kg), base chassis

Temperature

Non-operating—-40 ° to 70 °C / -40 ° to 158 °F

Operating—10 ° to 35 °C / 50 ° to 95 °F, with the maximum rate of change not to exceed
10 ° C / 50 °F per hour

Humidity

Non-operating—-90% relative humidity, non-condensing at 35 °C / 95 °F.

Shock

Operating—2.0 g, 11 msec, 1/2 sine

Packaged—Operational after an 24-inch free fall

Acoustic noise

7 Bels in sound power for a typical office ambient temperature (18-24 °C/65-75 °F). Your selection of peripherals may change the noise level.

Electrostatic discharge (ESD)

Tested to 15 kilovolts (kV); no component damage.

Maximum power consumption

350W (maximum output, power supply rating)

540W (maximum input, power supply rating)

Power input (low range)

90 to 127 (nominal) VAC; 47-63Hz

Power input (high range)

180 to 264 (nominal) VAC; 47-63Hz

CPU

Intel Core2 Duo 2.13-GHz processor with a 1066-MHz front side bus (FSB) and 2 MB of Level 2 cache

Memory

4 GB PC2-5300 DDR2 SDRAM ECC

Hard drive

250 GB SATA 7200 RPM

Ethernet

2 X 10/100/1000 RJ-45, 10BASE-T, 100BASE-TX, 1000BASE-T

Optical drive

1 DVD-ROM, front-accessible (8X DVD read, 24X CD read)

Serial ports

1

USB 2.0 ports

3 (1 at front and 2 at back of chassis)

Keyboard port

1 PS/2

Mouse port

1 PS/2