Cisco Identity Services Engine Hardware Installation Guide, Release 1.2
Cisco SNS-3400 Series Appliances
Downloads: This chapterpdf (PDF - 438.0KB) The complete bookPDF (PDF - 9.43MB) | Feedback

Table of Contents

Cisco SNS-3400 Series Appliances

Cisco SNS-3400 Series Appliance Hardware Specifications

Cisco SNS-3400 Series Front and Rear Panels

Cisco SNS Support for Cisco ISE

Cisco SNS-3400 Series Appliances

This chapter describes Cisco Secure Network Server (SNS) 3415 and 3495 appliances and hardware specifications.

Cisco SNS-3400 Series Appliance Hardware Specifications

Cisco SNS-3400 series appliance hardware consists of Cisco SNS 3415 and 3495 appliances.

In Table 1-1 , see the diagrams column for hyperlinks to diagrams that show power supply sockets, LEDs, and important controls or buttons on the corresponding panel.

Table 1-1 Cisco ISE SNS 3415/3495 Appliance Hardware Summary

Cisco ISE Appliance
Hardware Specifications
Diagrams

Cisco SNS- 3415-K9

  • Cisco UCS C220 M3
  • Single socket Intel E5-2609 2.4Ghz CPU 4 total cores, 4 total threads
  • 16 GB RAM
  • 1 x 600-GB disk
  • Embedded Software RAID 0
  • 4 GE network interfaces
  • For physical, environmental, and power specifications, see Cisco SNS-3400 Series Server Specifications .

Cisco SNS- 3495-K9

  • Cisco UCS C220 M3
  • Dual socket Intel E5-2609 2.4Ghz CPU 8 total cores, 8 total threads
  • 32 GB RAM
  • 2 x 600-GB disks
  • RAID 0+1
  • 4 GE network interfaces
  • For physical, environmental, and power specifications, see Cisco SNS-3400 Series Server Specifications .

Note Cisco ISE 1.2 supports an optional redundant power supply unit for Cisco SNS-3415-K9. The part number for the additional power supply to order is UCSC-PSU-650W=.


Cisco SNS-3400 Series Front and Rear Panels

Front Panel

Figure 1-1 shows the SNS 3415/3495 front panel.

Figure 1-1 Cisco SNS 3415/3495 Front Panel

 

 

1

Power button/power status LED

6

Power supply status LED

2

Identification button LED

7

Network link activity LED

3

System status LED

8

Asset tag (serial number)

4

Fan status LED

9

Keyboard, video, mouse (KVM) connector (used with the KVM cable that provides two USBs, one Video Graphics Adapter (VGA), and one serial connector)

5

Temperature status LED

10

Drives (up to eight hot-swappable, 2 to 5-inch drives)

 

Rear Panel

Figure 1-2 shows the SNS 3415/3495 rear panel.

Figure 1-2 SNS 3415/3495 Rear Panel

 

 

1

Power supplies (up to two)

7

Serial port (RJ-45 connector)

2

Slot 2: Low-profile Peripheral Component Interconnect Express (PCIe) slot on riser (half-height, half-length, x16 connector, x16 lane width)

8

1-GB Ethernet dedicated management port used to access CIMC (labeled M)

3

Slot 1: PCIe1 card containing 1-GB Ethernet ports (GigE2 and GigE3)

9

1-GB Ethernet port 1 (GigE0) for Cisco ISE management communication

4

1-GB Ethernet port 3 (GigE2)

10

1-GB Ethernet port 2 (GigE1)

5

1-GB Ethernet port 4 (GigE3)

11

USB ports

6

VGA video connector

12

Rear identification button

Serial Number Location

The serial number for the server is printed on a label on the top of the server, near the front.

Cisco SNS Support for Cisco ISE

The Cisco ISE software run on a dedicated Cisco SNS-3400 series appliance or on a VMware server. Cisco ISE, Release 1.2, software does not support the installation of any other packages or applications on this dedicated platform. See Release Notes for Cisco Identity Service Engine, Release 1.2, for additional hardware, compatibility information.

Release 1.2 is also supported on Cisco ISE 3300 series, Cisco NAC 3300 series, and Cisco Secure ACS 1121 appliances. You can upgrade an existing Cisco ISE 3300 series appliance to Release 1.2. For information on Cisco ISE 3300 series appliances, see Chapter1, “Installing Release 1.2 Software on Cisco ISE 3300 Series, Cisco NAC, and Cisco Secure ACS Appliances”