The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Revised: March 27, 2012, OL-18481-01
This guide describes the CLI commands for Cisco Intrusion Prevention System (IPS 7.0). It includes a glossary that contains expanded acronyms and pertinent IPS terms. This preface contains the following sections:
•Obtaining Documentation and Submitting a Service Request
This guide is for experienced network security administrators who configure and maintain Cisco IPS sensors, including the supported IPS appliances and modules.
This guide uses the following conventions:
Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the manual.
For more information on Cisco IPS 7.0, refer to the following documentation found at this URL:
http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/tsd_products_support_series_home.html
•Documentation Roadmap for Cisco Intrusion Prevention System 7.0
•Release Notes for Cisco Intrusion Prevention System 7.0(x)E4
•Cisco Intrusion Prevention System Device Manager Configuration Guide for IPS 7.0
•Cisco Intrusion Prevention System Manager Express Configuration Guide for IPS 7.0
•Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 7.0
•Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.0
•Installing and Removing Interface Cards in Cisco IPS 4260 and IPS 4270-20
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.